M3311

FEATURES - HIGH RELIABILITY FOR LOW COST - FREQUENCY STABILITY OF +-15 PPM AVAILABLE - AVAILABLE IN 5.0 AND 3.3 VOLT - EXCELLENT JITTER PERFORMANCE - CHEAPEST AVAILABLE SMD-VCXO IN METAL PACKAGE - EXTENDED TEMPERATURE RANGE TO -40/+85°C AVAILABLE PETERMANN TECHNIK Time & Frequency Components - APPLICATIONS: FIBER CHANEL, GIGABIT ETHERNET, SET-TOP BOX, BROADBAND, TELECOM, ETC. M3511 SMD-PACKAGE 11.4 x 9.6 x 5.0 mm 1.0 ~ 54.0 MHz 5.0 VOLT FREQUENCY RANGE 1.0 ~ 54.0 MHz 3.3 VOLT +-15 ~ +-100 ppm max. VS. TEMPERATURE +-5 ppm max. VS. SUPPLY VOLTAGE FREQUENCY STABILITY +-1 ppm max. VS. LOAD +-5 ppm max. / first year VS. AGING OPERATING TEMPERATURE RANGE -10/+60°C ~ -40/+85°C STORAGE TEMPERATURE RANGE -55/+125°C VOLTAGE +5.0 VDC +-5% +3.3 VDC +-5% 30 mA max. < 30.0 MHz 20 mA max. < 30.0 MHz INPUT CURRENT 40 mA max. < 40.0 MHz 25 mA max. < 40.0 MHz 45 mA max. < 54.0 MHz 30 mA max. < 54.0 MHz STANDARD 40/60% SYMMETRY OPTION 45/55% SIGNALS FOR 5.0 VOLT HCMOS AND TTL SIGNAL FOR 3.3 VOLT HCMOS ONLY RISE AND FALL TIME FOR HCMOS 10 ns max. (10% VDD TO 90% VDD) RISE AND FALL TIME FOR TTL 10 ns max. (0.4 TO 2.4 VOLT) OUTPUT "0" LEVEL 10% VDD HCMOS 5.0 AND 3.3 VOLT "1" LEVEL 90% VDD "0" LEVEL 0.4 VDC TTL 5.0 VOLT ONLY "1" LEVEL 2.4 VDC HCMOS 5.0 AND 3.3 VOLT 15 pF LOAD TTL 5.0 VOLT ONLY 10 TTL START-UP TIME 10 mS max. INPUT IMPEDANCE 50 kΩ min. PERIOD JITTER RMS 8 ps max. CONTROL VOLTAGE RANGE STANDARD 0.5 ~ 4.5 VDC 0.3 ~ 3.0 VDC CONTROL VOLTAGE OPTIONAL 0 ~ 5.0 VDC 0 ~ 3.3 VDC CENTER VOLTAGE 2.5 VDC 1.65 VDC PULLABILITY +-50 ppm min. LINEARITY 10% max. SLOPE POSITIVE PIN 1 CONTROL VOLTAGE PIN 2 GROUND PIN CONNECTION PIN 3 OUTPUT PIN 4 SUPPLY VOLTAGE OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SERIES PACKAGE PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de PETERMANN TECHNIK Time & Frequency Components PART NUMBERING GUIDE EXAMPLE SERIES M3311-25-W-S-VX3-50-27.000MHz-T M3511 FOR 5 VOLT M3311 FOR 3.3 VOLT BLANK = +- 100 ppm 50 = +-50 ppm 25 = +-25 ppm 20 = +-20 ppm 15 = +-15 ppm X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE BLANK = 0/+70°C N = -10/+60°C M = -20/+70°C W = -40/+85°C X = OTHER VALUE - PLEASE INDICATE YOUR REQUIRED VALUE BLANK = 40/60% S = 45/55% V = 0.5 ~ 4.5 V FOR 5 VOLT VERSION VX = 0 ~ 5.0 V FOR 5 VOLT VERSION V3 = 0.3 ~ 3.0 V FOR 3.3 VOLT VERSION VX3 = 0 ~ 3.3 V FOR 3.3 VOLT VERSION BLANK = +-50 ppm min. IF YOU REQUIRE ANOTHER VALUE PLEASE INDICATE THE REQUIRED VALUE FREQUENCY IN MHz -T STABILITY VS. TEMPERATURE TEMPERATURE RANGE SYMMETRY CONTROL VOLTAGE PULLING RANGE FREQUENCY TAPE AND REEL PACKAGE OUTLINE DRAWING M3511 AND M3311 ** #4 - 5.08 #3 5.0max #1 MARK 2.0 #1 1.5 #2 #1 #2 - **A capacitor of value 0.01µF or greater between VDD and Ground is recommended PIN #1 #2 #3 #4 CONNECTION CONTROL VOLTAGE GROUND OUTPUT SUPPLY VOLTAGE #4 #3 0.8 1.0 Unit: mm PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de 8.35 PETERMANN TECHNIK Time & Frequency Components (HCMOS LOAD) tr tf VOH 90%VDD (TTL LOAD) tr tf VOH 2.4V 50%VDD 1.4V 10%VDD VOL Th T DUTY=Th/T VOL Th T 0.4V DUTY=Th/T TEST CIRCUIT FOR HCMOS TEST CIRCUIT FOR TTL + mA M #4 + VM - TEST POINT #3 + mA M #4 + VM - TEST POINT #3 RL=390 + POWER SUPPLY - VCC OUT OSCILLATOR 0,1µF GND #1 #2 CONTROL VOLTAGE + CL=15pF POWER SUPPLY - VDD OUT OSCILLATOR 0,1µF GND #1 #2 CL=15pF 1N4148 or Equiv CONTROL VOLTAGE NOTE: CL includes probe and fixture capacitance NOTE: CL includes probe and fixture capacitance REFLOW SOLDER PROFILE 240°C REFLOW 240°C max. 4°C/s max. 10s max. COOLING TEMPERATURE 150°C 25°C 1 - 2 minutes TIME PETERMANN-TECHNIK | Amselweg 8 | D-86916 Kaufering Fon: 00 49 (0) 81 91 / 30 53 95 | Fax: 00 49 (0) 81 91 / 30 53 97 http://www.petermann-technik.de | info@petermann-technik.de