SMD0507

FEATURES - CHEAPEST AVAILABLE SMD-CRYSTAL IN CERAMIC PACKAGE - HIGH RELIABILITY FOR LOW COST / LARGE FREQUENCY SPECTRUM - LOW PROFILE - 1.3 MM MAX. PACKAGE HEIGHT - EXTENDED TEMPERATURE RANGE TO -40/+125°C AVAILABLE - EXCELLENT CLOCK SIGNAL GENERATUR FOR CPU'S - QUALIFIED FOR QUOTMOTIVE APPLICATIONS 2 Solder Pads 4 Solder Pads SMD0507/4 # 1 and 3 conected // # 2 and 4 ground FREQUENCY RANGE 6.0 ~ 45.0 MHz 36.0 ~ 121.0 MHz MODE OF VIBRATION AT-FUNDAMENTAL 3rd Overtone RESONANCE RESISTANCE 80 ~ 40 Ω max. 80 Ω max. FREQUENCY TOLERANCE AT 25°C +-5 ppm ~ +-50 ppm TEMPERATURE RANGE 0/+50°C ~ -40/+125°C +-3 ppm 0/+50°C +-5 ppm 0+50°C / -10/+60°C / 0/+70°C +-10 ppm 0+50°C / -10/+60°C / 0/+70°C / -20+70°C TEMPERATURE +-15 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/85°C STABILITY +-20 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-30 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-50 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C / -40/+125°C LOAD CAPACITANCE 6 ~ 50 pF or Series SHUNT CAPACITANCE 7 pF max. DRIVE LEVEL 0.01 mW ~ 0.1 mW (optional 1.0 mW available) AGING +-2 ppm per year (optional +-1 ppm available) INSULATION RESISTANCE >500 MΩ DC/100V +-10% STORAGE TEMPERATURE -55/+125°C PACKAGE Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION MINI-SMD-CRYSTAL SERIES SMD0507/2 PART NUMBERING SYSTEM EXAMPLE TYPE FREQUENCY FREQUENCY TOLERANCE AT 25°C TEMPERATURE STABILITY TEMPERATURE RANGE LOAD CAPACITANCE SMD0507/4 27.000 MHz 30/50/-40+85/20pF SMD0507/2 OR SMD0507/4 IN MHZ REQUIRED VALUE REQUIRED VALUE REQUIRED VALUE REQUIRED VALUE REV.02 / March 2008 http://www.petermann-technik.com | info@petermann-technik.com OUTLINE DRAWING OF SMD0507 WITH 2 SLODER PADS MARKING AREA 5.0 7.0 1.3max 2.0 5.0 3.0 2.2 2.2 4.5 Unit:mm PLEASE DO NOT USE THE SMD0507/2 FOR NEW DESIGNS. PLEASE ONLY USE SMD0507/4 FOR NEW DESIGNS. OUTLINE DRAWING OF SMD0507 WITH 4 SLODER PADS 7.0+0.2 TOP V IEW 1.3max 5.0+0.2 - 4.6 1# 2# 3# 4# 6. 3 1.4 1.20 2.4 2.54 1.50 1.00 2.4 BUTTOM VIEW 2.2 Unit:mm http://www.petermann-technik.com | info@petermann-technik.com 2.54 REEL SPECIFICATION 7. 5+0. 1 1.75+0 .1 - 4.0+0.1 1.5+0.1 2. 0+ 0.1 - P ULL DIRECTION 0.3+0.1 - 7.4+0.1 - 16.0+0.2 - 5. 4+ 0.1 - 8. 0+0.1 - 1. 7+0.1 - 1. 8+ 0.1 - 2. 0+0.5 21 .0+0.8 13.0+0.2 - 180+3 - 16.2+0 .3 20.4+0 .1 - 60+5 - Unit: mm REFLOW SOLDER PROFILE 260°C REF LOW 1TO5°C /s 1 to 5°C/s COOLING 10s max TEMPERATURE PREHEATIN G 150°C 1 to 9°C/s 25°C 60 TIME (Seconds) 200 Crystals can be soldered according to the norm JEDEC J-STD-020C. http://www.petermann-technik.com | info@petermann-technik.com