SMD0603-2

FEATURES - CHEAPEST AVAILABLE SMD-CRYSTAL IN CERAMIC PACKAGE - HIGH RELIABILITY FOR LOW COST - LOW PROFILE - 1.2 MM MAX. PACKAGE HEIGHT - EXTENDED TEMPERATURE RANGE TO -40/+125°C AVAILABLE - EXCELLENT CLOCK SIGNAL GENERATUR FOR CPU'S - QUALIFIED FOR QUOTMOTIVE APPLICATIONS 2 Solder Pads (do not use for new designs) 4 Solder Pads (please use 4pad crystal - available) # 1 and 3 conected // # 2 and 4 ground FREQUENCY RANGE 8.0 ~ 48.0 MHz 32.0 ~ 121.0 MHz MODE OF VIBRATION AT-FUNDAMENTAL 3rd Overtone RESONANCE RESISTANCE 80 ~ 40 Ω max. 80 Ω max. FREQUENCY TOLERANCE AT 25°C +-5 ppm ~ +-50 ppm TEMPERATURE RANGE 0/+50°C ~ -40/+125°C +-3 ppm 0/+50°C +-5 ppm 0+50°C / -10/+60°C / -20/+70°C +-10 ppm 0+50°C / -10/+60°C / 0/+70°C / -20+70°C / -40/+85°C TEMPERATURE +-15 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/85°C STABILITY +-20 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-30 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C +-50 ppm 0+50°C / -10/+60°C / 0/+70°C / -20/+70°C / -40/+85°C / -40/+125°C LOAD CAPACITANCE 6 ~ 50 pF or Series SHUNT CAPACITANCE 7 pF max. DRIVE LEVEL 0.01 mW ~ 0.1 mW (optional 1.0 mW available) AGING +-2 ppm per year (optional +-1 ppm available) INSULATION RESISTANCE >500 MΩ DC/100V +-10% STORAGE TEMPERATURE -55/+125°C PACKAGE Tape and Reel (1.000 pcs per reel) OTHER PARAMETERS ARE AVAILABLE ON REQUEST / CREATE HERE YOUR SPECIFICATION SMD0603/2 MINI-SMD-CRYSTALS SERIES SMD0603/4 PART NUMBERING SYSTEM EXAMPLE TYPE FREQUENCY FREQUENCY TOLERANCE AT 25°C TEMPERATURE STABILITY TEMPERATURE RANGE LOAD CAPACITANCE SMD0603/4 IN MHZ REQUIRED VALUE REQUIRED VALUE REQUIRED VALUE REQUIRED VALUE REV.02 / July 2008 http://www.petermann-technik.com | info@petermann-technik.com SMD0603/4 27.000 MHz 30/50/-40+85/20pF OUTLINE DRAWING OF SMD0603 WITH 2 SLODER PADS (please do not use 2pad package for new designs – will become obsolete) 6.0+ 0.2 - In ternal con nections (Top View) 3. 5+0.2 - #1 #2 1. 1max Reference land patt ern 1.6 BOTTOM VIEW 3.5 2.9 3. 0 Unit: m m OUTLINE DRAWING OF SMD0603 WITH 4 SLODER PADS (please use the standard 4pad package – it is always available) 6.0+ 0.2 In ternal con nections (Top View) 3.5+0.2 - #4 #3 #1 #2 1. 0+0.2 - Reference land patt ern 1.8 #1 #2 2.4 1.5 0. 9 1.4 4.4 #4 1. 4 3. 0 4.4 #3 Unit: m m http://www.petermann-technik.com | info@petermann-technik.com 2.4 2.4 REEL SPECIFICATION 7. 5+0.1 1. 75+0.1 - 4. 0+0.1 1.5 +0. 1 -1 PULL D IRECTION 0.3+0. 1 - 2. 0+0.1 16.0+0.2 - 6.4+0.1 - 3.9+0.1 - 8. 0+0.1 - 1. 5+ 0.1 - 1. 4+0.1 - 2.0+0.5 21.0+0.8 13.0+0 .2 - 180 +0 -3 16 .2+0.3 20.4+0.1 - 60+5 - Unit: mm REFLOW SOLDER PROFILE 260°C REF LOW 1TO5°C /s 1 to 5°C/s COOLING 10s max TEMPERATURE PREHEATIN G 150°C 1 to 9°C/s 25°C 60 TIME (Seconds) 200 Crystals can be soldered according to the norm JEDEC J-STD-020C. http://www.petermann-technik.com | info@petermann-technik.com