FM4006

FAST RECOVER RECTIFIER M1 THRU M7 Glass passivated Features Plastic package has Underwriters Laboratory Flammability Classification 94V-O Utilizing Flame Retardant Epoxy M olding Compound. For surface mounted applications. Exceeds environmental standards of MIL-S-19500 / 228 Low leakage current. SMA-L 0 .205(5.2) 0.189(4.8) 0.012(0.3) Typ. 0.110(2.8) 0.094(2.4) 0.181(4.6) 0.165(4.2) 0.075(1.9) 0.067(1.7) 0.040(1.0) Typ. 0.040 (1.0) Typ. Mechanical data Case : Molded plastic, JEDEC DO-214AC Terminals : Solder plated, solderable per MIL-STD-750, Method 2026 Polarity : Indicated by c athode band Mounting P osition : Any Weight : 0.0015 ounce, 0.05 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS (AT TA=25oC unless otherwise noted) PARAMETER Forward rectified current Forward surge current See Fig.2 8.3ms single half sine-wave superimposed on rate load (JEDEC methode) VR = VRRM TA = Reverse current Thermal resistance Diode junction capacitance Storage temperature 25 C o o CONDITIONS Symbol IO IFSM MIN. TYP. MAX. 1.0 30 5.0 UNIT A A uA uA o IR 50 Rq JA CJ TSTG -55 50 15 +150 C/w pF o VR = VRRM TA = 100 C Junction to ambient f=1MHz and applied 4vDC reverse voltage C SYMBOLS MARKING CODE A1 A2 A3 A4 A5 A6 A7 V RRM *1 V RMS *2 VR *3 VF *4 Operating temperature ( C) o (V) FM4001 FM4002 FM4003 FM4004 FM4005 FM4006 FM4007 50 100 200 400 600 800 1000 (V) 35 70 140 280 420 560 700 (V) 50 100 200 400 600 800 1000 (V) 1.1 -55 to +150 *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage *4 Maximum forward voltage Web Site: WWW.PS-PFS.COM FAST RECOVER RECTIFIER M1 THRU M7 RATING FIG.1-TYPICAL FORWARD CHARACTERISTICS AVERAGE FORWARD CURRENT,(A) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE 1.2 1.0 0.8 0.6 0.4 0.2 0 0 20 40 60 80 100 120 140 160 180 200 Single Phase Half Wave 60Hz Resistive Or Inductive Load 50 INSTANTANEOUS FORWARD CURRENT,(A) 10 3.0 1.0 Tj=25 C Pulse Width 300us 1% Duty Cycle AMBIENT TEMPERATURE ( C) FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FORWAARD SURGE CURRENT,(A) 50 0.1 .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 FORWARD VOLT AGE,(V) 40 30 Tj=25 C 8.3ms Single Half Sine Wave JEDEC method 20 10 FIG.3 - TYPICAL REVERSE CHARACTERISTICS 100 0 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz 10 REVERSE LEAKAGE CURRENT, (mA) 35 Tj=100 C FIG.5-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 30 25 20 15 10 5 0 1.0 .1 Tj=25 C .01 0 .01 .05 .1 .5 1 5 10 50 100 20 40 60 80 100 120 140 REVERSE VOLTAGE,(V) PERCENTAGE RATED PEAK REVERSE VOL TAGE Web Site: WWW.PS-PFS.COM