MB254

MASTER INSTRUMENT CORPORATION SINGLE-PHASE BRIDGE RECTIFIER MB2505 THRU MB2510 KBPC25005 THRU KBPC2510 F EATURES l Low cost l This series is UL recognized under component index, file number E127707 l High forward surge current capability l Ideal for printed circuit board l High isolation voltage from case to leads l High temperature soldering guaranteed: 260 oC/10 second, at 5 lbs. (2.3kg) tension. MECHANICAL DATA l Case: Molded plastic body l Terminal: Plated 0.25” (6.35mm) lug. l Polarity: Polarity symbols marked on case l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max. l Weight:1.02 ounce, 29 grams VOLTAGE RANGE CURRENT 50 to 1000 Volts 25 Amperes MB-35 1.14( 28.9) 1.12( 28.4) 0.666( 16.9) 0.626( 15.9) + AC 1.14( 28.9) 0.728( 18.5) 1.12( 28.4) 0.688( 17.5) AC 0.666( 16.9) 0.626( 15.9) 0.570( 14.5) 0.530( 13.5) 0.205( 5.2) DIA 0.197( 5.0) EXOPY CASE 0.46( 11.7) 0.41( 10.5) 0.472( 12.0) 0.374( 9.5) 0.033( 0.84) 0.028( 0.71) 0.252( 6.4) 0.248( 6.3) 0.252( 6.4) 0.248( 6.3) 0 ( .0 9 2.3 IA )D Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. SYMBOLS KBPC25005 KBPC2501 KBPC2502 KBPC2504 KBPC2506 M aximum Repetitive Peak Reverse Voltage M aximum RMS Voltage M aximum DC Blocking Voltage M aximum Average Forward Rectified Output Current, at TC=55℃(Note1,2) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t