MB2M

Miniature Glass Passivated Single-Phase Bridge Rectifiers MB2M thru MB10M Features Reverse Voltage 200 to 1000 Volts Forward Current 0.5 Ampere Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junctions High surge overload rating: 35A peak Saves space on printed circuit boards Recommended for non-automotive applications Mechanical Data Case: Molded plastic body over passivated junctions Terminals: Plated leads solderable per MIL-STD-750, Method 2026 Mounting Position: Any Weight: 0.078 oz., 0.22 g Maximum Ratings and Electrical Characteristics o (T =25C unless otherwise noted) A Parameter Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward output rectified current (see Fig.1) on glass-epoxy P.C.B. on aluminum substrate Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for fusing (t < 8.3ms) Maximum instantaneous forward voltage drop per leg at 0.4A Maximum DC reverse current at rated DC blocking voltage per leg Typical thermal resistance per leg Typical junction capacitance per leg (3) Symbol s VRRM VRMS V DC IF(AV) IFSM It VF IR RθJA RθJA RθJL CJ TJ, TSTG 2 MB2M 200 140 200 MB4M 400 280 400 MB6M 600 420 600 0.5 0.8 (1) (2) MB8M 800 560 800 MB10M 1000 700 1000 Units Volts Volts Volts Amp Amps A 2 se c Volt uA o 35.0 5.0 1.0 5.0 100 85 70 20 (1) (2) (1) TA = 25oC TA = 125oC C/W pF o 13 -55 to +150 Operating junction and storage temperature range C Notes: . 1. On glass epoxy P.C.B. mounted on 0.05 x 0.05" (1.3 x 1.3mm) pads 2. On aluminum substrate P.C.B. with an area of 0.8" x 0.8" (20 x 20mm) mounted on 0.05 x 0.05" (1.3 x 1.3mm) solder pad 3. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts . . Web Site: WWW.PS-PFS.COM RATINGS AND CHARACTERISTIC CURVES (TA = 25oC unless otherwise noted) . . . Web Site: WWW.PS-PFS.COM