MB6S

Low Profile Miniature Glass Passivated Single-Phase Surface Mount Bridge Rectifier MB1S - MB8S FEATURES • • • • • • • VOLTAGE - 50 TO 1000 VOLTS CURRENT - 0.5 AMPERES Low profile space Ideal for automated placement Glass passivated chip junction Low forward voltage drop Low leakage current High forward surge capability High temperature soldering： 260℃/10 seconds at terminals • Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC SOIC-4 Polarity symbols molded or marking on body 4 3 1: 2: 3: ~ ~ + 0.106( 2. 7) 0.09(2 .3) 0.118( 3. 0) MAX –– + 0.008( 0. 2) 4 : –– ~ 1 ~ 2 0.275( 7) MAX 0.067( 1. 7) 0.057( 1. 3) 0.051( 1. 3) 0.035( 0. 9) 0.165( 4. 2) 0.150( 3. 8) 0.067( 1. 7) 0.057( 1. 3) C0.02(0. 5) MECHANICAL DATA Case: MBF Molded plastic over glass passivated chip • Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D • Polarit : Polarit symbols marked on • 0.031( 0. 8) 0.0191(0 .5) 0.106( 2. 7) 0.09( 2.3) 0.193( 4. 9) 0.177( 4. 5) 0.014( 0. 35) 0.006( 0. 15) 0.043( 1. 1) 0.027( 0. 7) Dimensions are in: inches (mm) 0.5 Ampere Glass Passivated Bridge Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) PD RqJA RqJL Tstg TJ TA = 25°C unless otherwise noted Parameter Average Rectified Current @ TA = 50°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient,** per leg Thermal Resistance, Junction to Lead,** per leg Storage Tem perature Range Operating Junction Tem perature Value 0.5 Units A 35 1.4 11 85 20 -55 to +150 -55 to +150 A W mW /°C °C/W °C/W °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on PCB with 0.5-0.5" (13x13 mm) lead length. Electrical Characteristics Parameter TA = 25°C unless otherwise noted Device 1S 2S 200 140 200 4S 400 280 400 5.0 0.5 1.0 5.0 13 6S 600 420 600 8S 800 560 800 100 70 100 Units V V V mA mA V 2 At pF Peak Repetitive Reve rse Voltage Maximum RMS Bridge Input Voltage DC Revers e Voltage (Rated VR) Maximum Revers e Leakage, per leg @ rated VR TA = 25°C TA = 125°C Maximum Forward Voltage Drop, per bridge @ 0.5 A 2 I t rating for fusing t < 8.3 ms Typi cal Junction Capacitance, per leg VR = 4.0 V, f = 1.0 MHz Web Site: WWW.PS-PFS.COM Typical Characteristics Forward Current Derating Curve 1 Forward Characteristics 10 FORWARD CURRENT (A) FORWARD CURRENT (A) 0.75 1 0.5 0.1 TA = 2 5º C Pulse Width = 300µs 2% Duty Cycle 0.25 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE ( º C) 175 0.01 0.4 0.6 0.8 1 1.2 FORWARD VOLTAGE (V) 1.4 Non-Repetitive Surge Current PEAK FORWARD SURGE CURRENT (A) 35 REVERSE CURRENT ( µ A) 30 25 20 15 10 5 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 10 Reverse Characteristics T C = 100 º C 1 0.1 TA = 2 5 º C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Web Site: WWW.PS-PFS.COM