MB8S

MB05S THRU MB10S Features Surface Mount Package Glass Passivated Diode Construction Moisture Resistant Epoxy Case High Surge Current Capability • • • • 0.5Amp Single Phase Glass Passivated Bridge Rectifier 50 to 1000 Volts MBS -1 ∼ B ∼ C A Notch in case K M J H G L N + F D Maximum Ratings • • MCC Catalog Number MB05S MB1S MB2S MB4S MB6S MB8S MB10S Device Marking Operating Temperature: -55 °C to +150°C Storage Temperature: -55°C to +150°C Maximum Rccurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V Maximum DC Blocking Voltage 50V 100V 200V 400V 600V 800V 1000V E MB05S MB1S MB2S MB4S MB6S MB8S MB10S Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward IF(AV) 0.5A Note1 TA = 30°C Note2 TA = 30°C 0.8A Current Peak Forward Surge IFSM 30A 8.3ms, half sine Current Maximum 1.0V IFM = 0.5A; Instantaneous VF Forward Voltage TA = 25°C Maximum DC Reverse Current At IR 5 µA TA = 25°C Rated DC Blocking Voltage Typical Junction CJ 25pF Measured at Capacitance 1.0MHz, VR=4.0V Note1. Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts Note2. On alum: substrate P.C.B with an rea of 0.8 x 0.8 x 0.25” ( 20 x 20 x 6.4mm ) mounte on 0.05 x 0.05 “( 13 x 13 mm ) solder pad. *Pulse Test: Pulse Width 300 µsec, Duty Cycle 1% Web Site: WWW.PS-PFS.COM
  
      M
       .252    .017 .090 .004 .021 .055 ---- .040 .008
  .272    .029 .106 .008 .023 .065 .200  .050 .014   6.40    0.45 2.30 0.10 0.53 1.40 ---- 1.02 0.15  6.91    0.75 2.70 0.20 0.58 1.65 5.08  1.27 0.35    MB05S thru MB10S Figure 1 Typical Forward Characteristics 20 10 6 4 2 25°C Amps 1 .6 .4 .2 .1 .2 .06 .1 .04 .02 .01 .4 .6 .8 Volts Instantaneous Forward Current - Amperesversus Instantaneous Forward Voltage - Volts Figure 3 Forward Derating Curve 1.2 1.0 1.2 1.4 .06 .04 .02 .01 20 40 60 80 Volts Instantaneous Reverse Leakage Current - MicroAmperes ersus v Percent Of Rated Peak Reverse Voltage - Volts 100 120 140 TA=25°C 20 10 6 4 2 µ Amps 1 .6 .4 100 60 40 Figure 2 Typical Reverse Characteristics Figure 4 Peak Forward Surge Current 60 50 1.0 .8 40 .6 Amps Amps .4 30 20 10 5 0 150 175 .2 Single Phase, Half Wave 60Hz Resistive or Inductive Load 0 0 40 50 75 100 °C Average Forward Rectified Current - Amperes ersus v Ambient Temperature - °C 125 1 2 4 6 8 10 Cycles 20 40 60 80 100 Peak Forward Surge Current - Amperesversus Number Of Cycles At 60Hz - Cycles Web Site: WWW.PS-PFS.COM