SL13

LOW VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER SL12 THRU SL14 FEATURES l l l l l l l l l l Plastic package has Underwriters Laboratory Flammability Classification 94V-O For surface mounted applications Low profile package Built-in strain relief Metal to silicon rectifier majority carrier conduction Low power loss, High efficiency High current capability, low VF High surge capacity For use in low voltage high frequency inverters, free wheeling, and polarity protection applications High temperature soldering guaranteed: 260 ¢J /10 seconds at terminals SMA/DO-214AC MECHANICAL DATA Case: JEDEC DO-214AC molded plastic Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode Standard packaging: 12mm tape (EIA-481) Weight: 0.002 ounce, 0.064 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Resistive or inductive load. SYMBOLS SL12 20 14 20 SL13 30 21 30 SL14 40 28 40 UNITS Volts Volts Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at TL (See Figure 1) Peak Forward Surge Current 8.3ms single half sinewave superimposed on rated load(JEDEC method) Maximum Instantaneous Forward Voltage at 1.0A (Note 1) Maximum DC Reverse Current TA=25 ¢J (Note 1) At Rated DC Blocking Voltage TA=100 ¢J Maximum Thermal Resistance (Note 2) Operating Junction Temperature Range Storage Temperature Range NOTES: 1. Pulse Test with PW=300 £g sec, 1% Duty Cycle. VRRM VRMS VDC I(AV) IFSM VF IR R £K JL R £K JA TJ TSTG 1.0 30.0 0.38 0.38 0.5 20.0 28 88 -50 to +125 -50 to +150 0.40 Amps Amps Volts mA ¢J /W ¢J ¢J 2. Mounted on P.C.Board with 5.0mm (.013mm thick) copper pad areas. 2 SL12 THRU SL14 20 VERAGE FORWARD CURRENT AMPERES INSTANTANEOUS FORWARD CURRENT AMPERES 10 1.0 0.75 SINELE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.2×0.2"(5.0×5.0mm ) COPPER PAD AREAS 0.50 1.0 TJ = 25 ¢J PULSE WIDTH = 300£gs 1% DUTY CYCLE 0.25 0 0 20 40 60 80 100 120 140 0.1 .1 .2 .3 .4 .5 .6 .7 .9 1 .0 LEAD TEMPERATURE, ¢J INSTANTANEOUS FORWARD VOLTAGE, VOLTS Fig. 1-FORWARD CURRENT DERATING CURVEE Fig. 2-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 30 PEAK FORWARD SURGE CURRENT, AMPERES 25 20 15 10 5 8.3ms SINGLE HALF SINE WAVE JEDEC METHOD 1 2 5 10 20 50 100 NUMBER OF CYCLES AT 60Hz Fig. 3-MAXIMUM NON-REPETITIVE SURGE CURRENT 400 CAPACTANCE, pF 200 TJ = 2 5 ¢J 100 80 60 40 20 10 0.1 0.4 1.0 4 10 40 60 100 120 REVERSE VOLTAGE ,VOLTS Fig. 4-TYPICAL JUNCTION CAPACITANCE