UF204

ULTRAFAST SWITCHING RECTIFIER UF200 THRU UF2010 FEATURES l Plastic package has Underwriters Laboratory Flammability Classification 94V-O utilizing Flame Retardant Epoxy Molding Compound l Void-free Plastic in DO-15 package l 2.0 ampere operation at TA=55 ¢J with no thermal runaway l l Exceeds environmental standards of MIL-S-19500/228 Ultra fast switching for high efficiency DO-15 MECHANICAL DATA Case: Molded plastic, DO-15 Terminals: Axial leads, solderable per MIL-STD-202, Method 208 Polarity: Band denotes cathode Mounting Position: Any Weight: 0.015 ounce, 0.4 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 ¢J ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. UF200 UF201 Peak Reverse Voltage, Pepetitive ; VRM 50 100 Maximum RMS Voltage 35 70 DC Blocking Voltage; VR 50 100 Average Forward Current, Io @TA=55 ¢J 3.8” lead length, 60Hz, resistive or inductive load Peak Forward Surge Current IFM (surge) 8.3msec. single half sine-wave superimposed on rated load (JEDEC method) 1.00 Maximum Forward Voltage VF @2.0A, 25 ¢J Maximum Reverse Current, @ Rated TJ=25 ¢J Reverse Voltage TJ=100 ¢J Typical Junction capacitance (Note 1) CJ Typical Junction Resistance (Note 2) R £KJA Reverse Recovery Time 50 50 IF=.5A, IR=1A, Irr=.25A Operating and Storage Temperature Range UF202 200 140 200 UF204 400 280 400 2.0 60 UF206 600 420 600 UF208 UF2010 UNITS 800 1000 V 560 700 V 800 1000 V A A 50 1.10 10.0 500 35 45 50 -55 TO +150 1.70 75 75 75 V £g A £g A PF ¢J /W ns ¢J Web Site: WWW.PS-PFS.COM RATING AND CHARACTERISTIC CURVES UF200 THRU UF2010 trr +0.5A 0 -0.25 NOTE:1.Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF 2.Rise Time = 10ns max. Source Impedance = 50 Ohms -1.0 SET TIME BASE FOR 50 ns/cm 1cm Fig. 1-REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 10 UF200 TYPICAL 1 2.4 2.0 1.4 1.2 0.8 0.4 0 25 50 75 100 125 150 175 IFM, Apk SINGLE PHASE HALF WAVE 60Hz RESISSTIVE OR INDUCTIVE LOAD .375" 9.5mm LEAD LENGTHS 0.1 UF2010 TJ = 25 ¢J 0.01 0 .2 .4 .6 .8 1.0 1.2 1.4 1.6 FORWARD VOLTAGE-VFM(Vpk) AMBIENT TEMPERATURE, ¢J Fig. 2-FORWARD CHARACTERISTICS Fig. 3-FORWARD CURRENT DERATING CURVE PEAD FORWARD SURGE CURRENT, AMPERES 60 JUNCTION CAPACITANCE, pF 100 TJ = 25 ¢J f = 1.0MHz Vsig = 50mVp-p 48 36 24 10 5 1 10 REVERSE VOLTAGE, VOLTS 100 12 1 2 4 6 8 10 20 40 60 80 100 NUMBER OF CYCLES AT 60Hz Fig. 4-TYPICAL JUNCTION CAPACITANCE Fig. 5-PEAK FORWARD SURGE CURRENT Web Site: WWW.PS-PFS.COM