CLA05D-050A

WWW.PHIHONG.COM 5W Automobile Charger CLA05D Features • • • • • • • Improved Stretch Life of DC Coil Cord Power-On LED Indicator Portable and Mobile Devices E-Mark CE Length: 89.73mm (3.5in) Width: 30.48mm (1.2in) • • Reverse Polarity Protection Input Over Voltage Protection Applications Safety Approvals • • • • UL C-Tick Height: 38.20mm (1.5in) Weight: 81.7g (2.88oz) Mechanical Characteristics Output Specifications Load Model DC Output Voltage Min. Max. Ripple (1) P-P (max) Regulation Line Load 4.75V~5.25V CLA05D-050A 5V 0A 1.0A 100mV (1) The ripple was measure by using a 12 inch twisted pair terminated with a 10uF capacitor and a 0.1uF ceramic in parallel Phihong is not responsible for any error and change. Content is subject to change without notice. Please consult the Factory and visit www.phihong.com for the most up-to-date specifications. CLA Characteristics INPUT: DC Input Voltage Range 10 to 30VDC (12V nominal) WWW.PHIHONG.COM Environmental: Operating Temperature -20°C to 60°C DC Input Current ≤ 20mA @ No load (@ 12.0VDC) ≤ 0.65A @ 1.0A load (@ 10.0VDC) ≤ 0.27A @ 1.0A load (@ 30.0VDC) Storage Temperature -40°C to 85°C Humidity Operation 0 to 95% RH Storage 0 to 95% RH Efficiency 75% Min at Max. Load & 12.0VDC @ 25°C OUTPUT: Output Overvoltage Protection 9.5VDC +/-1% maximum by zener clamping. General: MTBF 100K hours min. @ full load 25°C ambient temperature Output Short Circuit Protection Current limiting without damage to unit. The output current shall not exceed 2.5A max. DC Output Connector 2.1 x 5.5 x 9.0mm Center Positive Standard Dimension Diagram Unit: mm (inch)