PSA110-105

WWW.PHIHONG.COM 110W Universal Industrial Series PSA110 Single Output L-Bracket Features • Integral EMI filter • 100% Burn-In Applications • Network • Computer Peripherals Safety Approvals • UL 1950 • CSA 22.2 234 • Low Profile Design • Over Voltage Protection • Low Profile Racks • Business Machines • TUV EN 60950 • CE (Low Voltage Directive) • Height: 43.6mm (1.7in) • Weight: 0.72kgm (1.6Ib) Mechanical Characteristics Dimensions: • Length: 172.7mm (6.81in) • Width: 93.5mm (3.7in) Output Specifications Model DC Output Voltage Min. Load Convection Ripple Max. (2) Regulation Line Load P-P PSA110-105 PSA110-112 PSA110-115 PSA110-124 +5V +12V +15V +24V 1A 0A 0A 0A 16A 7A 5A 3.3A 22A 9A 7.3A 4.5A 50mV 120mV 150mV 240mV +2% +2% +2% +2% +2% +2% +2% +2% (1) Measured by using a 12 inch twisted pair terminated with a 10mfd capacitor and 0.1mfd ceramic capacitor in parallel with primary and secondary ground holes connected together. (2) Forced air 30CFM required. PSA110 Single Characteristics AC Input Voltage 90VAC-264VAC AC Frequency 47 to 63Hz AC Input Current 3A maximum (115V) 1.5A Maximum (230V) Leakage Current 0.75mA (254VAC, 50Hz) AC Inrush Current (Cold Start) 25A at 115VAC 50A at 240VAC Efficiency 70% typical at full load, 120VAC Hold-up Time 16msec. at full load, 120VAC Switching Frequency 50KHz, typical Overvoltage Protection All models Overcurrent Protection Short circuit protected Auto-Restart Operation Temperature 0 to +50˚C Humidity 10 to 90% (Non-Condensing) Storage Temperature -25 to +85˚C MTBF Calculated Greater than 100,000 hours, full load, 25˚C (MIL-HDBK-217F) EMI FCC Class B EN55022 B Mating Connectors AC: Molex 09-50-3051 DC: Molex 09-50-3081 WWW.PHIHONG.COM POWER SUPPLY Dimension Diagram Unit: mm (inch) PSA110S/0312