PSA24A-120

WWW.PHIHONG.COM 24 WATT - TWO WIRE UNIVERSAL INPUT PSA24A-120(P) Adapter Meets EISA and CEC Requirements preliminary Features • Class B EMI • No Load Power Consumption < 0.3 Watt • Energy Star EPS Version 2.0 Compliant Applications • Portable Equipment • Peripherals Safety Approvals • cUL/UL • PSE Mechanical Characteristics • Length: 83.5mm (3.29in) • Width: 35.0mm (1.38in) Output Specifications DC Output Voltage 12V • • • • Class II Double Insulated EISA and CEC Compliant Short-Circuit Protection Access Devices • BSMI • • Height: 73.5mm (2.89in) Weight: 165g (5.82oz) Model PSA24A-120(P) Load Min. Max. 0A 2.0A Ripple (1) P-P (max) 150mV Regulation Line Load ±5% Efficiency Level Note: (1) Measured after 30 minutes with by-pass capacitors 0.1uf/10uf at output connector terminal and oscilloscope set at 20 Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSA24A-120(P) Characteristics INPUT: AC Input Voltage Rating 100 to 240VAC WWW.PHIHONG.COM Over Voltage Protection Output voltage shall not exceed 20V AC Input Voltage Range 90 to 264VAC Short Circuit Protection Output can be shorted without damage Input Current 0.6A(RMS) max. @ 100VAC, max. load ENVIRONMENTAL: Temperature Operation Non-operation 0 to +40°C -40 to +85°C Leakage Current 0.25mA max. Inrush Current (cold) < 85A for 230VAC at max. load (Cold start @ ambient 25°C) Humidity (Relative) Operation and Storage 20 to 90% Emissions FCC Class B CISPR 22 Class B Input Power Saving 0.3W maximum at no load OUTPUT: Efficiency > 82% average efficiency Dielectric Withstand (Hi-pot) Test Primary to Secondary: 3000VAC for 10mA 1min. DC Output Connector 2.1x5.5mm Center Positive Standard Hold-up Time 8mS min. @ 120VAC and max. load Mating Connector Kycon KLD-0202-A or equivalent Over Current Protection 5.0A max @ 230VAC Dimension Diagram Unit: mm (inch)