PSA60-115

WWW.PHIHONG.COM 80W* Universal Input Series PSA60 Series Switching Power Supply C *80W rated at 20CFM air flow cooling US Features High efficiency Over voltage protection Applications Disk/Tape drive systems Peripheral equipment Safety Compliance cUL 1950 CSA 22.2 234 Mechanical Characteristics Dimensions: Length: 127mm (5.0in) Width: 76.2mm (3.0in) Output Specifications Model PSA60-105 PSA60-112 PSA60-115 PSA60-124 PSA60-148 PSA60-202 PSA60-203 PSA60-301 Built-in EMI filter Short circuit protection Microprocessor systems Mixed logic applications TUV EN60950 CE (Low Voltage Directive) Height: 40mm (1.58in) Weight: 0.36kgs (0.79Ibs) Ripple @20CFM 10A 6.6A 5.3A 3.3A 1.4A 8.0A 1.8A 6.0A 4.5A 8.0A 3.0A 0.5A 8.0A 3.0A 0.5A 8.0A 2.0A 0.5A DC Output Voltage +5V +12V +15V +24V +48V +5V (V1) +24V (V2) +5V (V1) +12V (V2) +5V (V1) +12V (V2) -12V (V3) +5V (V1) +12V (V2) -5V (V3) +5V (V1) +15V (V2) -15V (V31) Load Min. 0.0A 0.0A 0.0A 0.0A 0.0A 1.0A 0.1A 1.0A 0.3A 1.0A 0.3A 0.0A 1.0A 0.3A 0.0A 1.0A 0.3A 0.0A Total Regulation +2% +2% +2% +2% +2% +2% +5% +2% +5% +2% +5% +5% +2% +5% +5% +2% +5% +5% Output Pins 1,2,3 1,2,3 1,2,3 1,2,3 1,2,3 2,3 1 2,3 1 2,3 1 6 2,3 1 6 2,3 1 6 Max. 10A 5.0A 4.0A 2.5A 1.2A 6.0A 1.3A 4.0A 3.5A 6.0A 2.2A 0.3A 6.0A 2.2A 0.5A 6.0A 1.5A 0.5A P-P 50mV 120mV 150mV 240mV 480mV 50mV 240mV 50mV 120mV 50mV 120mV 120mV 50mV 120mV 50mV 50mV 150mV 150mV PSA60-303 PSA60-304 (1) Total output power must not exceed 60W at convection cooling and 80W at 20CFM air flow cooling. (2) Peak output current lasting less than 30 seconds with duty cycle less than 10%. During peak loading, peak total power must not exceed 80W. (3) Ripple & noise is measured at 20MHz bandwidth limit by use a 12 inch twisted wire terminated with a 10 f capacitor in parallel 0.1 f ceramic capacitor. Phihong is not responsible for any errors or changes. Please contact the factory and visit www.phihong.com for the most up-to-date specifications. PSA60 Characteristics AC input Voltage 90VAC-264VAC AC Frequency 47 to 63Hz AC Input Current 1.4A(rms) for 115VAC 0.7A(rms) for 230VAC Efficiency 70% typical at full load Hold-up Time 12msec. at full load, 115VAC input Overvoltage Protection >120% on main output Overcurrent Protection All outputs equipped with automatic recovery current limiting circuit Operation Temperature 0 to +50oC Storage Temperature -25oC to +85oC MTBF Calculated Greater than 110,000 hours, full load, 25oC (MIL-HDBK-217F) Emissions FCC Class B EN 55022 B Immunity EN 50082-1: 1997 61000-4-2, Level 3 61000-4-3, Level 2 61000-4-4, Level 2 61000-4-5, Level 3 61000-4-6, Level 2 61000-4-11 WWW.PHIHONG.COM POWER SUPPLY Dimension Diagram Unit: mm (inch) Output Connections: CN2 Single Multiple Pins 1,2,3: See Chart See Chart Pins 4,5: Common return Common return Pins 6: Common return See Chart CN1: Input: Molex 09-50-3031 or equivalent CN2: Molex 09-50-3061 or equivalent PSA60/0405