PSAA60W-240

WWW.PHIHONG.COM 60 Watt Universal 2-Wire Input Adapter PSAA60W Power Supply meets CEC and EISA Requirements Features • Low Cost • Efficiency Level IV Compliance • Class B EMI Applications • Portable Equipment • Peripherals Safety Approvals • cUL / UL EN60950-1 • CE Mechanical Characteristics • Length: 130mm (5.12in) • Width: 60mm (2.36in) Output Specifications Model PSAA60W-120 PSAA60W-150 PSAA60W-180 PSAA60W-240 PSAA60W-480 DC Output Voltage +12V +15V +18V +24V +48V Load Min. Max. 0A 5.0A 0A 4.0A 0A 3.3A 0A 2.5A 0A 1.25A • • • • • • • • • Non-vented/Spill-proof Case No Load Power Consumption < 0.5W Low Profile Design Networking Gaming Machines TUV EN60950-1 (except 48V model) CB IEC60950-1 Height: 32mm (1.30in) Weight: 300g (10.58oz) Ripple (1) P-P (max.) 120mV 150mV 180mV 240mV 480mV Regulation Line Load ±5% ±5% ±5% ±5% ±5% Efficiency Level (1) Measured by-pass capacitors 0.1uF / 100uF at output connector terminal and oscilloscope set at 20 Mhz. Phihong reserves the right to make changes without further notice. Please consult Phihong USA and visit www.phihong.com for the most up-to-date specifications. PSAA60W Characteristics INPUT: AC Input Voltage Rating 100 to 240VAC WWW.PHIHONG.COM Over-voltage Protection Circuit will latch; re-start after cycling AC power with 2 minutes unplugged AC Input Voltage Range 90 to 264VAC Over-current Protection Circuit will latch AC Input Frequency 47/63Hz Short Circuit Protection Auto-reset when short is removed Input Current 1.6A @ 100VAC 0.7A @ 240VAC ENVIRONMENTAL: Temperature Operation Non-operation 0°C to +40°C -20°C to +80°C Leakage Current 0.25mA Max. @ 254VAC 60Hz Humidity Inrush Current (cold) 90A Max. @ 100VAC 150A Max. @ 240VAC (Cold start @ ambient 25°C) Operation 10% to 90% Emissions FCC Class B EN55022 Class B Input Power Saving < 0.5W at no load Reliability: MTBF 50k Hr. @ ambient 25°C / output load 5.0A OUTPUT: Efficiency 85% minimum average efficiency DC Output Connector 2.1 x 5.5 mm Center Positive Hold-up Time >10mS Dimension Diagram Unit: mm