1N4007G

DISCRETE SEMICONDUCTORS DATA SHEET handbook, 2 columns M3D116 1N4001G to 1N4007G Rectifiers Product specification Supersedes data of April 1992 1996 May 24 Philips Semiconductors Product specification Rectifiers FEATURES • Glass passivated • High maximum operating temperature • Low leakage current • Excellent stability • Available in ammo-pack. DESCRIPTION 1N4001G to 1N4007G This package is hermetically sealed and fatigue free as coefficients of expansion of all used parts are matched. Rugged glass package, using a high temperature alloyed construction. 2/3 page k (Datasheet) LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VRRM 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G VR continuous reverse voltage 1N4001G 1N4002G 1N4003G 1N4004G 1N4005G 1N4006G 1N4007G IF(AV) average forward current PARAMETER repetitive peak reverse voltage  a MAM047 Fig.1 Simplified outline (SOD57) and symbol. CONDITIONS MIN. − − − − − − − − − − − − − − MAX. 50 100 200 400 600 800 1000 50 100 200 400 600 800 1000 V V V V V V V V V V V V V V UNIT averaged over any 20 ms period; Tamb = 75 °C; see Fig.2 averaged over any 20 ms period; Tamb = 100 °C; see Fig.2 − − − − − −65 −65 1.00 A 0.75 A 1.00 A 10 30 +175 +175 A A °C °C IF IFRM IFSM Tstg Tj continuous forward current repetitive peak forward current non-repetitive peak forward current storage temperature junction temperature Tamb = 75 °C; see Fig.2 half sinewave; 60 Hz 1996 May 24 2 Philips Semiconductors Product specification Rectifiers ELECTRICAL CHARACTERISTICS Tj = 25 °C; unless otherwise specified. SYMBOL VF VF(AV) IR IR(AV) PARAMETER forward voltage full-cycle average forward voltage reverse current full-cycle average reverse current IF(AV) = 1 A VR = VRmax VR = VRmax; Tamb = 100 °C 1N4001G to 1N4007G CONDITIONS IF = 1 A; see Fig.3 MAX. 1.1 0.8 10 50 30 V V UNIT µA µA µA VR = VRRMmax; Tamb = 75 °C THERMAL CHARACTERISTICS SYMBOL Rth j-tp Rth j-a Note 1. Device mounted on epoxy-glass printed-circuit board, 1.5 mm thick; thickness of copper ≥40 µm, see Fig.4. For more information please refer to the “General Part of associated Handbook”. PARAMETER thermal resistance from junction to tie-point thermal resistance from junction to ambient note 1 CONDITIONS lead length = 10 mm VALUE 46 100 UNIT K/W K/W 1996 May 24 3 Philips Semiconductors Product specification Rectifiers GRAPHICAL DATA 1N4001G to 1N4007G handbook, halfpage 1.5 MBH386 handbook, halfpage 10 MBH385 IF (A) 1 IF (A) 1 0.5 (1) (2) (3) 10−1 0 0 0 100 Tamb (°C) 200 (1) Tamb = 100 °C. (2) Tamb = 20 °C. (3) Tamb = −50 °C. 0.5 1 VF (V) 1.5 Fig.2 Maximum forward current as a function of ambient temperature. Fig.3 Forward current as a function of forward voltage; typical values. handbook, halfpage 50 25 7 50 2 3 MGA200 Dimensions in mm. Fig.4 Device mounted on a printed-circuit board. 1996 May 24 4 Philips Semiconductors Product specification Rectifiers PACKAGE OUTLINE handbook, full pagewidth k 3.81 max 28 min Dimensions in mm. Fig.5 SOD57. ,  4.57 max 1N4001G to 1N4007G a 0.81 max 28 min MBC880 DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. 1996 May 24 5