1N4732A

DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D130 1N4728A to 1N4749A Voltage regulator diodes Product specification Supersedes data of April 1992 1996 Apr 26 Philips Semiconductors Product specification Voltage regulator diodes FEATURES • Total power dissipation: max. 1000 mW • Tolerance series: ±5% • Working voltage range: nom. 3.3 to 24 V. APPLICATIONS • Low voltage stabilizers. The diodes are type branded. handbook, halfpage 1N4728A to 1N4749A DESCRIPTION Low voltage regulator diodes in hermetically sealed SOD66 (DO-41) packages. The series consists of 22 types with nominal working voltages from 3.3 to 24 V. k a MAM241 Fig.1 Simplified outline (SOD66; DO-41) and symbol. LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL IF IZM IZSM Ptot Tstg Tj PARAMETER continuous forward current working current non-repetitive peak reverse current total power dissipation storage temperature junction temperature Tamb = 50 °C CONDITIONS MIN. − MAX. 500 UNIT mA see Table “Per type” see Table “Per type” − −65 −65 1000 +200 +200 mW °C °C ELECTRICAL CHARACTERISTICS Total series Tj = 25 °C; unless otherwise specified. SYMBOL VF PARAMETER forward voltage CONDITIONS IF = 200 mA; see Fig.3 MIN. − MAX. 1.2 V UNIT 1996 Apr 26 2 1996 Apr 26 3 Philips Semiconductors Per type Tj = 25 °C; unless otherwise specified. WORKING VOLTAGE VZ (V)(1) at IZtest NOM. 1N4728A 1N4729A 1N4730A 1N4731A 1N4732A 1N4733A 1N4734A 1N4735A 1N4736A 1N4737A 1N4738A 1N4739A 1N4740A 1N4741A 1N4742A 1N4743A 1N4744A 1N4745A 1N4746A 1N4747A 1N4748A 1N4749A Notes 1. VZ is measured with device at thermal equilibrium while held in clips at 10 mm from body in still air at 25 °C. 2. Half square wave or equivalent sinewave pulse 1⁄120 second duration superimposed on IZtest. 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 9.1 10 11 12 13 15 16 18 20 22 24 76 69 64 58 53 49 45 41 37 34 31 28 25 23 21 19 17 15.5 14 12.5 11.5 10.5 TEST CURRENT IZtest (mA) DIFFERENTIAL RESISTANCE rdif (Ω) at IZtest MAX. 10 10 9 9 8 7 5 2 3.5 4 4.5 5 7 8 9 10 14 16 20 22 23 25 rdif (Ω) at IZ MAX. 400 400 400 400 500 550 600 700 700 700 700 700 700 700 700 700 700 700 750 750 750 750 1 1 1 1 1 1 1 1 1 0.5 0.5 0.5 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 0.25 IZ (mA) REVERSE CURRENT at REVERSE VOLTAGE IR (µA) MAX. 100 100 50 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 5 5 1 1 1 1 1 1 2 3 4 5 6 7 7.6 8.4 9.1 9.9 11.4 12.2 13.7 15.2 16.7 18.2 WORKING CURRENT IZM (mA) NON-REPETITIVE PEAK REVERSE CURRENT IZSM (mA)(2) MAX. 1380 1260 1190 1070 970 890 810 730 660 605 550 500 454 414 380 344 304 285 250 225 205 190 Voltage regulator diodes TYPE No. VR (V) MAX. 276 252 234 217 193 178 162 146 133 121 110 100 91 83 76 69 61 57 50 45 41 38 1N4728A to 1N4749A Product specification Philips Semiconductors Product specification Voltage regulator diodes THERMAL CHARACTERISTICS SYMBOL Rth j-tp PARAMETER thermal resistance from junction to tie-point CONDITIONS 1N4728A to 1N4749A VALUE 110 UNIT K/W lead length 4 mm; see Fig.2 1996 Apr 26 4 Philips Semiconductors Product specification Voltage regulator diodes GRAPHICAL DATA 1N4728A to 1N4749A 103 handbook, full pagewidth Rth j-tp (K/W) δ=1 0.75 0.50 0.33 0.20 0.10 0.05 MBG928 102 10 0.02 0.01 0 1 10−1 tp T δ= tp T 1 10 102 103 104 tp (ms) 105 Fig.2 Thermal resistance from junction to tie-point; lead length 4 mm. handbook, halfpage 300 MBG925 IF (mA) 200 (1) (2) 100 0 0 0.5 VF (V) 1.0 (1) Tj = 200 °C; typical values. (2) Tj = 25 °C; typical values. Fig.3 Forward current as a function of forward voltage. 1996 Apr 26 5 Philips Semiconductors Product specification Voltage regulator diodes PACKAGE OUTLINE 1N4728A to 1N4749A handbook, full pagewidth k a 0.81 max MBC894 2.6 max 28 min 4.8 max 28 min Dimensions in mm. Fig.4 SOD66 (DO-41). DEFINITIONS Data sheet status Objective specification Preliminary specification Product specification Limiting values Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale. This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications. 1996 Apr 26 6