74ABT823D

Philips Semiconductors Product specification 9-bit D-type flip-flop with reset and enable (3-State) 74ABT823 FEATURES flip-flops • High speed parallel registers with positive edge-triggered D-type • Ideal where high speed, light loading, or increased fan-in are required with MOS microprocessors DESCRIPTION The 74ABT823 Bus interface Register is designed to eliminate the extra packages required to buffer existing registers and provide extra data width for wider data/address paths of buses carrying parity. The 74ABT823 is a 9-bit wide buffered register with Clock Enable (CE) and Master Reset (MR) which are ideal for parity bus interfacing in high microprogrammed systems. The register is fully edge-triggered. The state of each D input, one set-up time before the Low-to-High clock transition is transferred to the corresponding flip-flop’s Q output. • Output capability: +64mA/–32mA • Latch-up protection exceeds 500mA per Jedec Std 17 • ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model • Power-up 3-State • Power-up Reset QUICK REFERENCE DATA SYMBOL tPLH tPHL CIN COUT ICCZ PARAMETER Propagation delay CP to Qn Input capacitance Output capacitance Total supply current CONDITIONS Tamb = 25°C; GND = 0V CL = 50pF; VCC = 5V VI = 0V or VCC Outputs disabled; VO = 0V or VCC Outputs disabled; VCC =5.5V TYPICAL 4.4 4 7 500 UNIT ns pF pF nA ORDERING INFORMATION PACKAGES 24-Pin Plastic DIP 24-Pin plastic SO 24-Pin Plastic SSOP Type II 24-Pin Plastic TSSOP Type I TEMPERATURE RANGE –40°C to +85°C –40°C to +85°C –40°C to +85°C –40°C to +85°C OUTSIDE NORTH AMERICA 74ABT823 N 74ABT823 D 74ABT823 DB 74ABT823 PW NORTH AMERICA 74ABT823 N 74ABT823 D 74ABT823 DB 74ABT823PW DH DWG NUMBER SOT222-1 SOT137-1 SOT340-1 SOT355-1 PIN CONFIGURATION PIN DESCRIPTION PIN NUMBER SYMBOL OE D0-D8 Q0-Q8 CP CE MR GND VCC FUNCTION Output enable input (active-Low) Data inputs Data outputs Clock pulse input (active rising edge) Clock enable input (active-Low) Master reset input (active-Low) Ground (0V) Positive supply voltage OE D0 D1 D2 D3 D4 D5 D6 D7 1 2 3 4 5 6 7 8 9 24 23 22 21 20 19 18 17 16 15 14 13 TOP VIEW VCC Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 CE CP 1 2, 3, 4, 5, 6, 7, 8, 9, 10 23, 22, 21, 20, 19,18, 17, 16, 15 13 14 11 12 24 D8 10 MR 11 GND 12 SA00227 1995 Sep 06 1 853–1617 15703 Philips Semiconductors Product specification 9-bit D-type flip-flop with reset and enable (3-State) 74ABT823 LOGIC SYMBOL LOGIC SYMBOL (IEEE/IEC) 1 11 2 3 4 5 6 7 8 9 10 14 13 D0 D1 D2 D3 D4 D5 D6 D7 D8 13 14 11 1 CP CE MR OE Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 2 3 4 5 6 7 23 22 21 20 19 18 17 16 15 8 9 10 EN R G1 1C2 2D 23 22 21 20 19 18 17 16 15 SA00228 SA00229 FUNCTION TABLE INPUTS OE L L L L H H h L l MR L H H H X CE X L L H X CP X ↑ ↑ ↑ X Dn X h l X X OUTPUTS Q0 – Q8 L H L NC Z Hold High impedance NC X Z ↑ ↑ = = = = = No change Don’t care High impedance “off” state Low to High clock transition Not a Low-to-High clock transition Clear Load and read data OPERATING MODE = High voltage level = High voltage level one set-up time prior to the Low-to-High clock transition = Low voltage level = Low voltage level one set-up time prior to the Low-to-High clock transition LOGIC DIAGRAM 14 CE D0 2 13 CP CP D D CP D CP D CP D CP D CP D CP D CP D CP D1 3 D2 4 D3 5 D4 6 D5 7 D6 8 D7 9 D8 10 R Q R Q R Q RR Q R Q R Q R Q R Q R Q 11 MR 1 OE 23 Q0 22 Q1 21 Q2 20 Q3 19 Q4 18 Q5 17 Q6 16 Q7 15 Q8 SA00230 1995 Sep 06 2 Philips Semiconductors Product specification 9-bit D-type flip-flop with reset and enable (3-State) 74ABT823 ABSOLUTE MAXIMUM RATINGS1, 2 SYMBOL VCC IIK VI IOK VOUT IOUT Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 VO < 0 output in Off or High state output in Low state VI < 0 CONDITIONS RATING –0.5 to +7.0 –18 –1.2 to +7.0 –50 –0.5 to +5.5 128 –65 to 150 UNIT V mA V mA V mA °C DC output diode current DC output voltage3 DC output current Storage temperature range NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER Min VCC VI VIH VIL IOH IOL ∆t/∆v Tamb DC supply voltage Input voltage High-level input voltage Low-level input voltage High-level output current Low-level output current Input transition rise or fall rate Operating free-air temperature range 0 –40 4.5 0 2.0 0.8 –32 64 5 +85 LIMITS Max 5.5 VCC V V V V mA mA ns/V °C UNIT 1995 Sep 06 3 Philips Semiconductors Product specification 9-bit D-type flip-flop with reset and enable (3-State) 74ABT823 DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Min VIK Input clamp voltage VCC = 4.5V; IIK = –18mA VCC = 4.5V; IOH = –3mA; VI = VIL or VIH VOH High-level output voltage VCC = 5.0V; IOH = –3mA; VI = VIL or VIH VCC = 4.5V; IOH = –32mA; VI = VIL or VIH VOL VRST II IOFF IPU/IPD IOZH IOZL ICEX IO ICCH ICCL ICCZ ∆ICC Additional supply current per input pin2 Quiescent supply current Low-level output voltage Power-up output low voltage3 Input leakage current Power-off leakage current Power-up/down 3-State output current4 3-State output High current 3-State output Low current Output High leakage current Output current1 VCC = 4.5V; IOL = 64mA; VI = VIL or VIH VCC = 5.5V; IO = 1mA; VI = GND or VCC VCC = 5.5V; VI = GND or 5.5V VCC = 0.0V; VO or VI ≤ 4.5V VCC = 2.0V; VO = 0.5V; V OE = VCC; VI = GND or VCC VCC = 5.5V; VO = 2.7V; VI = VIL or VIH VCC = 5.5V; VO = 0.5V; VI = VIL or VIH VCC = 5.5V; VO = 5.5V; VI = GND or VCC VCC = 5.5V; VO = 2.5V VCC = 5.5V; Outputs High, VI = GND or VCC VCC = 5.5V; Outputs Low, VI = GND or VCC VCC = 5.5V; Outputs 3-State; VI = GND or VCC VCC = 5.5V; one input at 3.4V, other inputs at VCC or GND –50 2.5 3.0 2.0 Typ –0.9 2.9 3.4 2.4 0.42 0.13 ±0.01 ±5.0 ±5.0 5.0 –5.0 5.0 –100 0.5 27 0.5 0.5 0.55 0.55 ±1.0 ±100 ±50 50 –50 50 –180 250 34 250 1.5 –50 Max –1.2 2.5 3.0 2.0 0.55 0.55 ±1.0 ±100 ±50 50 –50 50 –180 250 34 250 1.5 Tamb = –40°C to +85°C Min Max –1.2 V V V V V V µA µA µA µA µA µA mA µA mA µA mA UNIT NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. For valid test results, data must not be loaded into the flip-flops (or latches) after applying the power. 4. This parameter is valid for any VCC between 0V and 2.1V with a transition time of up to 10msec. For VCC = 2.1V to VCC = 5V " 10%, a transition time of up to 100µsec is permitted. AC CHARACTERISTICS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Min fMAX tPLH tPHL tPHL tPZH tPZL tPHZ tPLZ Maximum clock frequency Propagation delay CP to Qn Propagation delay MR to Qn Output enable time to High and Low level Output disable time from High and Low level 1 1 2 4 5 4 5 125 2.1 2.2 2.0 1.0 2.2 2.7 2.8 Tamb = +25oC VCC = +5.0V Typ 200 4.3 4.4 4.1 3.0 4.1 4.8 5.0 5.9 6.1 6.3 4.5 5.6 6.2 6.4 Max Tamb = -40 to +85oC VCC = +5.0V ±0.5V Min 125 2.1 2.2 2.0 1.0 2.2 2.7 2.8 6.8 6.7 7.1 5.3 6.3 6.9 6.9 Max MHz ns ns ns ns UNIT 1995 Sep 06 4 Philips Semiconductors Product specification 9-bit D-type flip-flop with reset and enable (3-State) 74ABT823 AC SETUP REQUIREMENTS GND = 0V, tR = tF = 2.5ns, CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Tamb = +25oC VCC = +5.0V Min ts(H) ts(L) th(H) th(L) tw(H) tw(L) ts(H) ts(L) th(H) th(L) tw(L) trec Setup time, High or Low Dn to CP Hold time, High or Low Dn to CP CP pulse width High or Low Setup time, High or Low CE to CP Hold time, High or Low CE to CP MR pulse width, Low Recovery time MR to CP 3 3 1 3 3 2 2 2.1 2.1 1.3 1.3 2.9 3.8 2.0 3.3 1.0 2.0 5.5 2.5 Typ 0.5 0.2 0.0 –0.3 1.9 2.8 –0.5 1.5 –1.4 0.7 4.0 0.6 Tamb = -40 to +85oC VCC = +5.0V ±0.5V Min 2.1 2.1 1.3 1.3 2.9 3.8 2.0 3.3 1.0 2.0 5.5 2.5 ns ns ns ns ns ns ns UNIT 1995 Sep 06 5 Philips Semiconductors Product specification 9-bit D-type flip-flop with reset and enable (3-State) 74ABT823 AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V MR 1/fMAX VM tw(L) CP VM tW(H) tPHL Qn VM tW(L) tPLH VM Qn tPHL VM VM CP VM VM tREC SA00232 SA00159 Waveform 1. Propagation Delay, Clock Input to Output, Clock Pulse Width, and Maximum Clock Frequency Waveform 2. Master Reset Pulse WIdth, Master Reset to Output Delay and Master Reset to Clock Recovery Time Dn, CE CP NOTE: The shaded areas indicate when the input is permitted to change for predictable output performance. SA00231 Waveform 5. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level 1995 Sep 06 ÉÉÉ É ÉÉÉÉÉÉÉÉÉ ÉÉÉ É ÉÉÉÉÉÉÉÉÉ ÉÉÉ ÉÉÉÉÉÉÉ ÉÉÉ VM VM VM VM ts(H) th(H) ts(L) th(L) VM VM OE VM tPZH VM tPHZ VOH–0.3V 0V Qn VM SA00066 Waveform 3. Data Setup and Hold Times Waveform 4. 3-State Output Enable Time to High Level and Output Disable Time from High Level OE VM tPZL VM tPLZ Qn VM VOL+0.3V 0V SA00067 6 Philips Semiconductors Product specification 9-bit D-type flip-flop with reset and enable (3-State) 74ABT823 TEST CIRCUIT AND WAVEFORM VCC 7.0V RL 90% NEGATIVE PULSE VM 10% tTHL (tF) CL RL POSITIVE PULSE 10% tW tTLH (tR) 90% 90% VM 10% 0V 10% 0V tTLH (tR) tTHL (tF) AMP (V) tW VM 90% AMP (V) PULSE GENERATOR VIN D.U.T. RT VOUT Test Circuit for 3-State Outputs VM SWITCH POSITION TEST tPLZ tPZL All other SWITCH closed closed open VM = 1.5V Input Pulse Definition DEFINITIONS RL = Load resistor; see AC CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. RT = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude 74ABT 3.0V Rep. Rate 1MHz tW 500ns tR 2.5ns tF 2.5ns SA00012 1995 Sep 06 7