BAP63-03

DISCRETE SEMICONDUCTORS DATA SHEET BAP63-03 Silicon PIN diode Product specification Supersedes data of 2001 May 18 2004 Feb 11 Philips Semiconductors Product specification Silicon PIN diode FEATURES • High speed switching for RF signals • Low diode capacitance • Low diode forward resistance • Very low series inductance • For applications up to 3 GHz. APPLICATIONS • RF attenuators and switches. DESCRIPTION Planar PIN diode in a SOD323 small SMD plastic package. Top view BAP63-03 PINNING PIN 1 2 DESCRIPTION cathode anode 1 2 sym006 Marking code: D2. The marking bar indicates the cathode. Fig.1 Simplified outline (SOD323) and symbol. ORDERING INFORMATION TYPE NUMBER BAP63-03 PACKAGE NAME − DESCRIPTION plastic surface mounted package; 2 leads VERSION SOD323 LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VR IF Ptot Tstg Tj PARAMETER continuous reverse voltage continuous forward current total power dissipation storage temperature junction temperature Ts ≤ 90 °C CONDITIONS − − − −65 −65 MIN. MAX. 50 100 500 +150 +150 UNIT V mA mW °C °C 2004 Feb 11 2 Philips Semiconductors Product specification Silicon PIN diode ELECTRICAL CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL VF IR Cd PARAMETER forward voltage reverse leakage current diode capacitance CONDITIONS IF = 50 mA VR = 35 V VR = 0; f = 1 MHz VR = 1 V; f = 1 MHz VR = 20 V; f = 1 MHz rD diode forward resistance IF = 0.5 mA; f = 100 MHz; note 1 IF = 1 mA; f = 100 MHz; note 1 IF = 10 mA; f = 100 MHz; note 1 |s21|2 isolation VR = 0; f = 900 MHz VR = 0; f = 1800 MHz VR = 0; f = 2450 MHz |s21|2 insertion loss IF = 0.5 mA; f = 900 MHz IF = 0.5 mA; f = 1800 MHz IF = 0.5 mA; f = 2450 MHz |s21|2 insertion loss IF = 1 mA; f = 900 MHz IF = 1 mA; f = 1800 MHz IF = 1 mA; f = 2450 MHz |s21|2 insertion loss IF = 10 mA; f = 900 MHz IF = 10 mA; f = 1800 MHz IF = 10 mA; f = 2450 MHz |s21|2 insertion loss IF = 100 mA; f = 900 MHz IF = 100 mA; f = 1800 MHz IF = 100 mA; f = 2450 MHz τL charge carrier life time − 0.4 0.35 0.27 2.5 1.95 1.17 15.4 10.1 7.8 0.21 0.28 0.38 0.18 0.26 0.35 0.13 0.20 0.30 0.10 0.18 0.28 TYP. 0.95 BAP63-03 MAX. 1.1 10 − − 0.32 3.5 3 1.8 1.5 − − − − − − − − − − − − − − − − V UNIT nA pF pF pF Ω Ω Ω Ω dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB ns IF = 100 mA; f = 100 MHz; note 1 0.9 when switched from IF = 10 mA to 310 IR = 6 mA; RL = 100 Ω; measured at IR = 3 mA 1.5 LS Note series inductance − nH 1. Guaranteed on AQL basis: inspection level S4, AQL 1.0. THERMAL CHARACTERISTICS SYMBOL Rth(j-s) PARAMETER thermal resistance from junction to soldering point VALUE 120 UNIT K/W 2004 Feb 11 3 Philips Semiconductors Product specification Silicon PIN diode GRAPHICAL DATA MGW126 BAP63-03 handbook, halfpage 10 handbook, halfpage 500 MGW130 rD (Ω) Cd (fF) 400 300 1 200 100 10 −1 10 −1 1 10 I F (mA) 102 0 0 4 8 12 16 VR (V) Tj = 25 °C; f = 1 MHz. 20 Tj = 25 °C; f = 100 MHz. Fig.2 Forward resistance as a function of forward current; typical values. Fig.3 Diode capacitance as a function of reverse voltage; typical values. handbook, halfpage 2 0 MGW131 MGW132 | s 21| handbook, halfpage 2 (1) (2) 0 (dB) − 0.1 | s 21| (dB) − 10 (3) − 0.2 (4) − 20 − 0.3 − 30 − 0.4 − 0.5 0 1 2 f (GHz) 3 − 40 0 1 2 f (GHz) 3 (1) IF = 100 mA. (2) IF = 10 mA. (3) IF = 1 mA. (4) IF = 0.5 mA. Diode zero biased and inserted in series with a 50 Ω stripline circuit. Tamb = 25 °C. Diode inserted in series with a 50 Ω stripline circuit and biased via the analyzer Tee network. Tamb = 25 °C. Fig.4 Insertion loss (|s21|2) of the diode in on-state as a function of frequency; typical values. Fig.5 Isolation (|s21|2) of the diode in off-state as a function of frequency; typical values. 2004 Feb 11 4 Philips Semiconductors Product specification Silicon PIN diode PACKAGE OUTLINE Plastic surface mounted package; 2 leads BAP63-03 SOD323 D A E X HD v M A Q 1 2 bp A A1 (1) c Lp detail X 0 1 scale 2 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.05 bp 0.40 0.25 c 0.25 0.10 D 1.8 1.6 E 1.35 1.15 HD 2.7 2.3 Lp 0.45 0.15 Q 0.25 0.15 v 0.2 Note 1. The marking bar indicates the cathode OUTLINE VERSION SOD323 REFERENCES IEC JEDEC JEITA SC-76 EUROPEAN PROJECTION ISSUE DATE 99-09-13 03-12-17 2004 Feb 11 5 Philips Semiconductors Product specification Silicon PIN diode DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development DEFINITION BAP63-03 This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). II Preliminary data Qualification III Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification  The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition  Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information  Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes  Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2004 Feb 11 6 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R77/04/pp7 Date of release: 2004 Feb 11 Document order number: 9397 750 12634