BC547_04

DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D186 BC546; BC547 NPN general purpose transistors Product specification Supersedes data of 1999 Apr 15 2004 Nov 25 Philips Semiconductors Product specification NPN general purpose transistors FEATURES • Low current (max. 100 mA) • Low voltage (max. 65 V). APPLICATIONS • General purpose switching and amplification. DESCRIPTION NPN transistor in a TO-92; SOT54 plastic package. PNP complements: BC556 and BC557. 1 handbook, halfpage BC546; BC547 PINNING PIN 1 2 3 emitter base collector DESCRIPTION 2 3 3 2 1 MAM182 Fig.1 Simplified outline (TO-92; SOT54) and symbol. ORDERING INFORMATION PACKAGE TYPE NUMBER NAME BC546A BC546B BC547 BC547B BC547C SC-43A DESCRIPTION plastic single-ended leaded (through hole) package; 3 leads VERSION SOT54 2004 Nov 25 2 Philips Semiconductors Product specification NPN general purpose transistors LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VCBO PARAMETER collector-base voltage BC546A; BC546B BC547 VCEO collector-emitter voltage BC546A; BC546B BC547; BC547B; BC547C VEBO emitter-base voltage BC546A; BC546B BC547; BC547B; BC547C IC ICM IBM Ptot Tstg Tj Tamb Note 1. Transistor mounted on an FR4 printed-circuit board. THERMAL CHARACTERISTICS SYMBOL Rth(j-a) Note 1. Transistor mounted on an FR4 printed-circuit board. PARAMETER thermal resistance from junction to ambient CONDITIONS note 1 collector current (DC) peak collector current peak base current total power dissipation storage temperature junction temperature ambient temperature Tamb ≤ 25 °C; note 1 open collector − − − − − − −65 − −65 open base − − CONDITIONS open emitter − − MIN. BC546; BC547 MAX. 80 50 65 45 6 6 100 200 200 500 +150 150 +150 V V V V V V UNIT mA mA mA mW °C °C °C VALUE 250 UNIT K/W 2004 Nov 25 3 Philips Semiconductors Product specification NPN general purpose transistors CHARACTERISTICS Tamb = 25 °C unless otherwise specified. SYMBOL ICBO IEBO hFE PARAMETER collector-base cut-off current emitter-base cut-off current DC current gain BC546A BC546B; BC547B BC547C DC current gain BC546A BC546B; BC547B BC547C BC547 VCEsat VBEsat VBE Cc Ce fT F Notes 1. VBEsat decreases by about 1.7 mV/K with increasing temperature. 2. VBE decreases by about 2 mV/K with increasing temperature. collector-emitter saturation voltage base-emitter saturation voltage base-emitter voltage collector capacitance emitter capacitance transition frequency noise figure IC = 10 mA; IB = 0.5 mA IC = 100 mA; IB = 5 mA IC = 10 mA; IB = 0.5 mA; note 1 IC = 100 mA; IB = 5 mA; note 1 VCE = 5 V; IC = 2 mA; note 2 VCE = 5 V; IC = 10 mA VEB = 0.5 V; IC = ic = 0 A; f = 1 MHz VCE = 5 V; IC = 2 mA; see Figs 2, 3 and 4 CONDITIONS VCB = 30 V; IE = 0 A VCB = 30 V; IE = 0 A; Tj = 150 °C VEB = 5 V; IC = 0 A VCE = 5 V; IC = 10 µA; see Figs 2, 3 and 4 MIN. − − − − − − 110 200 420 110 − − − − 580 − − BC546; BC547 TYP. − − − 90 150 270 180 290 520 − 90 200 700 900 660 − 1.5 11 − 2 MAX. 15 5 100 − − − 220 450 800 800 250 600 − − 700 770 − − − 10 UNIT nA µA nA mV mV mV mV mV mV pF pF MHz dB VCB = 10 V; IE = ie = 0 A; f = 1 MHz − VCE = 5 V; IC = 10mA; f = 100 MHz 100 VCE = 5 V; IC = 200 µA; RS = 2 kΩ; − f = 1 kHz; B = 200 Hz 2004 Nov 25 4 Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 handbook, full pagewidth 250 MBH723 hFE 200 VCE = 5 V 150 100 50 0 10−2 10−1 1 10 102 IC (mA) 103 BC546A. Fig.2 DC current gain; typical values. handbook, full pagewidth 300 MBH724 hFE VCE = 5 V 200 100 0 10−2 10−1 1 10 102 IC (mA) 103 BC546B; BC547B. Fig.3 DC current gain; typical values. 2004 Nov 25 5 Philips Semiconductors Product specification NPN general purpose transistors BC546; BC547 handbook, full pagewidth 600 MBH725 VCE = 5 V hFE 400 200 0 10−2 10−1 1 10 102 IC (mA) 103 BC547C. Fig.4 DC current gain; typical values. 2004 Nov 25 6 Philips Semiconductors Product specification NPN general purpose transistors PACKAGE OUTLINE Plastic single-ended leaded (through hole) package; 3 leads BC546; BC547 SOT54 c E d A L b 1 D 2 e1 e 3 b1 L1 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.55 c 0.45 0.38 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) max. 2.5 Note 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 REFERENCES IEC JEDEC TO-92 JEITA SC-43A EUROPEAN PROJECTION ISSUE DATE 04-06-28 04-11-16 2004 Nov 25 7 Philips Semiconductors Product specification NPN general purpose transistors DATA SHEET STATUS LEVEL I DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2)(3) Development DEFINITION BC546; BC547 This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). II Preliminary data Qualification III Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. 3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. DEFINITIONS Short-form specification  The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition  Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information  Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes  Philips Semiconductors reserves the right to make changes in the products including circuits, standard cells, and/or software described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2004 Nov 25 8 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2004 SCA76 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands R75/04/pp9 Date of release: 2004 Nov 25 Document order number: 9397 750 13568