BGE887BO

DISCRETE SEMICONDUCTORS DATA SHEET handbook, halfpage M3D112 BGE887BO Optical receiver module Product specification Supersedes data of 2000 Apr 10 2001 Sep 27 Philips Semiconductors Product specification Optical receiver module FEATURES • Excellent linearity • Extremely low noise • Excellent flatness • Standard CATV outline • Rugged construction • Gold metallization ensures excellent reliability. APPLICATIONS • CATV systems operating in the 40 to 860 MHz frequency range. DESCRIPTION Hybrid high dynamic range optical receiver module in a SOT115U package operating at a voltage supply of +24 V (DC). The module contains a monomode optical input suitable for wavelengths from 1290 to 1600 nm, a terminal to monitor the pin diode current and an electrical output with an impedance of 75 Ω. handbook, halfpage BGE887BO PINNING - SOT115U PIN 1 2 3 5 7 8 9 common common +VB common common output DESCRIPTION monitor current 1 2 3 5 7 8 9 Side view MLB162 Fig.1 Simplified outline. QUICK REFERENCE DATA SYMBOL f S22 d2 F Itot HANDLING Fibreglass optical coupling: maximum tensile strength = 5 N; minimum bending radius = 35 mm. PARAMETER frequency range output return losses optical input return losses second order distortion equivalent noise input total current consumption (DC) f = 324.25 MHz f = 40 MHz VB = 24 V f = 40 to 860 MHz CONDITIONS MIN. 40 11 45 − − 175 − − −70 7 205 MAX. 860 UNIT MHz dB dB dBc pA/√Hz mA 2001 Sep 27 2 Philips Semiconductors Product specification Optical receiver module LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL f Tstg Tmb Pin ESD PARAMETER frequency range storage temperature operating mounting base temperature optical input power ESD sensitivity continuous human body model; R = 1.5 kΩ; C = 100 pF CONDITIONS MIN. 40 −40 −20 − 500 BGE887BO MAX. 860 +85 +85 5 − UNIT MHz °C °C mW V CHARACTERISTICS Table 1 Bandwidth 40 to 860 MHz; VB = 24 V; Tmb = 30 °C; ZS = ZL = 75 Ω PARAMETER responsivity pin 1 monitor voltage flatness of frequency response output return losses optical input return losses d2 d3 F sλ λ L Itot Notes 1. Two laser test; each laser with 40% modulation index; fp = 135 MHz; Pp = 0.5 mW; fq = 189.25 MHz; Pq = 0.5 mW; measured at fp + fq = 324.25 MHz. 2. Three laser test; each laser with 40% modulation index; fp = 326.25 MHz; Pp = 0.33 mW; fq = 333.25 MHz; Pq = 0.33 mW; fr = 335.25 MHz; Pr = 0.33 mW; measured at fp + fq − fr = 324.25 MHz. 3. The module normally operates at VB = 24 V but is able to withstand supply transients up to 30 V. second order distortion third order distortion equivalent noise input spectral sensitivity optical wavelength length of optical fibre total current consumption (DC) fibre; SM type; 9/125 µm note 3 note 1 note 2 f = 40 MHz λ = 1310 ±20 nm λ = 1550 ±20 nm f = 40 to 860 MHz CONDITIONS λ = 1300 nm λ = 1300 nm MIN. 800 0.75 − 11 45 − − − 0.85 0.9 1290 1 175 − 1 ±0.5 − − −70 −80 7 − − 1600 − 205 MAX. UNIT V/W V/mW dB dB dB dB dB pA/√Hz A/W A/W nm m mA SYMBOL S Vpin 1 FL S22 handbook, halfpage Pin 1 10 kΩ photo current 1 kΩ MLB151 Fig.2 Monitor current pin. 2001 Sep 27 3 Philips Semiconductors Product specification Optical receiver module PACKAGE OUTLINE BGE887BO Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; optical input; 7 gold-plated in-line leads D E S2 Z p N1 N2 M A2 1 A L S1 F S W d B U2 Q e e1 q2 q1 yMB p yMB yMB b wM 2 3 5 7 8 9 N SOT115U M1 M2 c U1 q 0 optical input DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. 9.1 b c D d E max. max. max. e e1 F L min. 8.8 5 scale 10 mm S1 S2 U1 U2 max. 8 W w y 0.1 Z max. 12 16.7 4.95 44.75 16.1 4.55 6-32 0.25 UNC M 2.5 M1 1.6 N1 N2 N M2 min. max. max. 0.9 1000 10.7 5 p 4.15 3.85 Q max. 2.4 q q1 q2 S 4.2 mm 20.8 0.51 0.25 27.2 2.54 13.75 2.54 5.08 12.7 0.38 38.1 25.4 10.2 OUTLINE VERSION SOT115U REFERENCES IEC JEDEC EIAJ EUROPEAN PROJECTION ISSUE DATE 99-04-13 01-08-10 2001 Sep 27 4 Philips Semiconductors Product specification Optical receiver module DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development DEFINITIONS BGE887BO This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Preliminary data Qualification Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification  The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition  Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information  Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes  Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. CAUTION This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B. 2001 Sep 27 5 Philips Semiconductors Product specification Optical receiver module NOTES BGE887BO 2001 Sep 27 6 Philips Semiconductors Product specification Optical receiver module NOTES BGE887BO 2001 Sep 27 7 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2001 SCA73 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613518/05/pp8 Date of release: 2001 Sep 27 Document order number: 9397 750 08694