BSN254

DISCRETE SEMICONDUCTORS DATA SHEET book, halfpage M3D186 BSN254; BSN254A N-channel enhancement mode vertical D-MOS transistor Product specification Supersedes data of 1997 Jun 23 2002 Feb 19 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor FEATURES • Direct interface to C-MOS, TTL, etc. • High-speed switching • No secondary breakdown • Low RDSon. APPLICATIONS • Line current interruptor in telephone sets • Relay, high-speed and line transformer drivers. DESCRIPTION N-channel enhancement mode vertical D-MOS transistor in a SOT54 (TO-92) variant package. handbook, halfpage BSN254; BSN254A PINNING - SOT54 variant DESCRIPTION PIN BSN254 1 2 3 gate drain source gate drain BSN254A source d 1 2 3 g MAM146 s note: various pinnings are available on request Fig.1 Simplified outline and symbol. QUICK REFERENCE DATA SYMBOL VDS ID Ptot RDSon VGSth PARAMETER drain-source voltage (DC) drain current (DC) total power dissipation gate-source threshold voltage Tamb ≤ 25 °C ID = 1 mA; VDS = VGS drain-source on-state resistance ID = 300 mA; VGS = 10 V CONDITIONS − − − 2.8 − TYP. MAX. 250 310 1 5 2 V mA W Ω V UNIT LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 60134). SYMBOL VDS VGSO ID IDM Ptot Tstg Tj Note 1. Device mounted on a printed-circuit board; maximum lead length 4 mm; mounting pad for drain lead minimum 10 × 10 mm. PARAMETER drain-source voltage (DC) gate-source voltage (DC) drain current (DC) peak drain current total power dissipation storage temperature junction temperature Tamb ≤ 25 °C; note 1 open drain CONDITIONS − − − − − −55 − MIN. MAX. 250 ±20 310 1.25 1 +150 150 V V mA A W °C °C UNIT 2002 Feb 19 2 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor THERMAL CHARACTERISTICS SYMBOL Rth j-a Note PARAMETER thermal resistance from junction to ambient; note 1 BSN254; BSN254A VALUE 125 UNIT K/W 1. Device mounted on a printed-circuit board; maximum lead length 4 mm; mounting pad for drain lead minimum 10 × 10 mm. CHARACTERISTICS Tj = 25 °C unless otherwise specified. SYMBOL V(BR)DSS IGSS VGSth RDSon IDSS  Yfs Ciss Coss Crss ton toff PARAMETER drain-source breakdown voltage gate-source leakage current gate-source threshold voltage drain-source on-state resistance drain-source leakage current transfer admittance input capacitance output capacitance feedback capacitance CONDITIONS ID = 10 µA; VGS = 0 VGS = ±20 V; VDS = 0 ID = 1 mA; VDS = VGS ID = 20 mA; VGS = 2.4 V ID = 300 mA; VGS = 10 V VDS = 200 V; VGS = 0 ID = 300 mA; VDS = 25 V VDS = 25 V; VGS = 0; f = 1 MHz VDS = 25 V; VGS = 0; f = 1 MHz VDS = 25 V; VGS = 0; f = 1 MHz ID = 250 mA; VDD = 50 V; VGS = 0 to 10 V ID = 250 mA; VDD = 50 V; VGS = 10 to 0 V MIN. 250 − 0.8 − − − 200 − − − − − TYP. MAX. UNIT − − − − 2.8 − 600 100 21 10 − ±100 2 7.5 5 1 − 120 30 15 V nA V Ω Ω µA mS pF pF pF Switching times (see Figs 2 and 3) turn-on time turn-off time 6 47 10 60 ns ns 2002 Feb 19 3 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor BSN254; BSN254A handbook, halfpage handbook, halfpage VDD = 50 V 90 % INPUT 10 % 90 % 10 V 0V ID 50 Ω MBB691 OUTPUT 10 % ton toff MBB692 Fig.2 Switching times test circuit. Fig.3 Input and output waveforms. handbook, halfpage 1.2 MRC238 handbook, halfpage 1.2 MGU569 Ptot (W) 0.8 ID (A) (1) (2) (3) (4) 0.8 (5) 0.4 0.4 (6) (7) 0 0 50 100 150 200 Tamb (°C) 0 0 2 4 6 8 10 VDS (V) Tj = 25 °C. (1) VGS = 10 V. (2) VGS = 5 V. (3) VGS = 4 V. (4) VGS = 3.5 V. (5) VGS = 3 V. (6) VGS = 2.5 V. (7) VGS = 2 V. Fig.4 Power derating curve. Fig.5 Typical output characteristics. 2002 Feb 19 4 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor BSN254; BSN254A handbook, halfpage ID 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 MGU570 handbook, halfpage 20 MGU571 (1) (A) RDSon (Ω) (2) 15 10 (3) 5 (4) (5) (6) 0 2 4 6 8 10 VGS (V) 0 10−1 Tj = 25 °C. (1) VGS = 2.5 V. (2) VGS = 3 V. 1 ID (A) 10 (3) VGS = 3.5 V. (4) VGS = 4 V. (5) VGS = 5 V. (6) VGS = 10 V. VDS = 10 V; Tj = 25 °C. Fig.7 Fig.6 Typical transfer characteristics. Drain-source on-state resistance as a function of drain current; typical values. handbook, halfpage 250 MGU572 C (pF) 200 150 100 Ciss 50 Coss Crss 0 10 20 VDS (V) 30 0 VGS = 0; f = 1 MHz; Tj = 25 °C. Fig.8 Input, output and feedback capacitance as functions of drain-source voltage; typical values. 2002 Feb 19 5 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor BSN254; BSN254A handbook, halfpage 2 MGU573 handbook, halfpage 1.25 k MGU574 k (1) 1 1.5 (2) 0.75 1 0.5 0.5 0.25 0 −50 0 50 100 Tj (°C) 150 0 −50 0 50 100 Tj (°C) 150 R DSon at T j k = ---------------------------------------R DSon at 25 ° C Typical RDSon: (1) ID = 250 mA; VGS = 10 V. (2) ID = 20 mA; VGS = 2.4 V. V GSth at T j k = --------------------------------------V GSth at 25 ° C Typical VGSth at 1 mA. Fig.9 Temperature coefficient of drain-source on-state resistance; typical values. Fig.10 Temperature coefficient of gate-source threshold voltage; typical values. 2002 Feb 19 6 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor PACKAGE OUTLINE Plastic single-ended leaded (through hole) package; 3 leads (on-circle) BSN254; BSN254A SOT54 variant c L2 E d A L b 1 2 D e1 e 3 b1 L1 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A 5.2 5.0 b 0.48 0.40 b1 0.66 0.56 c 0.45 0.40 D 4.8 4.4 d 1.7 1.4 E 4.2 3.6 e 2.54 e1 1.27 L 14.5 12.7 L1(1) max 2.5 L2 max 2.5 Notes 1. Terminal dimensions within this zone are uncontrolled to allow for flow of plastic and terminal irregularities. OUTLINE VERSION SOT54 variant REFERENCES IEC JEDEC TO-92 variant EIAJ SC-43 EUROPEAN PROJECTION ISSUE DATE 98-03-26 2002 Feb 19 7 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor DATA SHEET STATUS DATA SHEET STATUS(1) Objective data PRODUCT STATUS(2) Development BSN254; BSN254A DEFINITIONS This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A. Preliminary data Qualification Product data Production Notes 1. Please consult the most recently issued data sheet before initiating or completing a design. 2. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. DEFINITIONS Short-form specification  The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition  Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information  Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. DISCLAIMERS Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes  Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no licence or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 2002 Feb 19 8 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor NOTES BSN254; BSN254A 2002 Feb 19 9 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor NOTES BSN254; BSN254A 2002 Feb 19 10 Philips Semiconductors Product specification N-channel enhancement mode vertical D-MOS transistor NOTES BSN254; BSN254A 2002 Feb 19 11 Philips Semiconductors – a worldwide company Contact information For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825 For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com. © Koninklijke Philips Electronics N.V. 2002 SCA74 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 613510/03/pp12 Date of release: 2002 Feb 19 Document order number: 9397 750 09312