CAX100

P hilips Competence Centre Plastics B.V. s pecification sheet 190 -1 Optical Components 5 722 650 3418 p age 1/1 1 997-12-10 1999-07- 13 author: G Verkade All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Datasheet Plastic Collimator Lens CAX100 These data concern a full plastic aspherical plano-convex lens. It is specified for use as a collimator in combination with a diode laser. It can be mounted by use of glue or spring-loaded. Mechanical lockmounting is not advisable because of possible distortions. Parameters W avelength 670 nm Unit Design conditions N .A. Clear Aperture CA Designed with laser cover glass (BK7) on source side: Distance from source Glass thickness Optical parameters 0.20 4.1 0.55 0.25 -mm mm mm ©N.V. PHILIPS' ELECTRONICS 5722 600 20173 Focal Length Back Focal Length BFL ( incl BK7-glass) Free Working Distance F WD RMS mean RMS max. (±3σ) Optical Tolerance Field Radius M echanical parameters Mounting hole diameter Dmh Other parameters: see drawing on axis on axis 10.0 9.21 8.48 35 80 0.1 0.2 mm mm mm mλ mλ mm mm ∅ 6.28 mm Alle rechten voorbehouden. Verveelvoudiging, geheel of gedeeltelijk is niet toegestaan dan met schriftelijke toestemming van de auteursrechthebbende. Environmental stability Storage Temperature Operating Temperature -25 to 100 -10 to 75 °C °C General Data: Transmission [%]: 90 Lens Material: Polycarbonate Specifications subject to change without notice. Zemax catalogue file available.