FQ1216MEV-3

RF SOLUTIONS FQ1216ME (MK3 family) Multi-Standard Desktop Video Modules Product specification 3139 149 10330 1 Rev g : 16.02.2004 Philips RF Solutions Product specification Multi-Standard Desktop Video Module FEATURES • • • • • • • • • • • • Multi-Standard TV Systems Broadcast reception True 5 V device (low power dissipation) Full frequency range from channel E2 (48.25 MHz) to channel E69 (855.25 MHz) PLL controlled tuning Programmable PLL step size (31.25 / 50 kHz or 62.5 kHz) True-synchronous vision IF demodulator (PLL) Ultra linear FM PLL demodulator Demodulated video output, AF sound output, second IF sound output. 2 I C-bus control of tuning, address selection, AFC status information nd User-settable 2 IF address for PIP application Complies with European regulations on radiation, signal handling and immunity (“CENELEC 55020, 55013” ) Small horizontally mounted metal 70 mm housing FQ1216ME MK3 ORDERING INFORMATION TYPE FQ1216ME/I H-3 FQ1216MP/I H-3 FQ1216ME/I V-3 FQ1216ME/P H-3 FQ1216ME/L H-3 DESCRIPTION IEC / Horizontal / User-settable 2 nd nd ORDER NUMBERS 3139 147 18291 3139 147 18321 3139 147 19151 nd IF address IEC / Horizontal User-settable 2 IF address IEC / Vertical / 2 fixed IF address nd nd Phono / Horizontal / User-settable 2 IF address Long IEC / Horizontal / User-settable 2 IF address 3139 147 18771 3139 147 18891 M ARKING The following items of information are printed on a sticker that is on the top cover of the tuner: • • • • • Type number Code number Origin letter of factory Change code Year and week code 3139 149 10330 2 Rev g : 16.02.2004 Philips RF Solutions Product specification Multi-Standard Desktop Video Module DESCRIPTION FQ1216ME MK3 The FQ1216ME family belongs to the new FM1200 MK3 family of small size frontends, which are designed to meet a wide range of RF applications in the PC /TV Multi-Media environment. The FQ1216ME combines the functions of an all-band TV tuner, and a multi-standard TV IF demodulation unit for both positive and negative modulated TV systems. The FQ1216ME is intended for CCIR L/L’ (France), B/G, I and D/K systems. The FQ1216MP covers only CCIR B/G, D/K and I. The frontends have a built-in digital (I C) PLL tuning system. A DC-DC converter circuit is built-in in the FQ1216ME to synthesize the tuning voltage required, thus making the frontend a true 5V device. The FQ1216ME/IV-3 has a fixed address of # 84 for the IF processor. For all others, a second address can be set by using a 2K2 resistor at 10 of the module. All modules use the narrowband AGC detection system. 2 INTERMEDIATE FREQUENCIES SYSTEM Picture carrier Colour Sound 1 Sound 2 NICAM L 38.90 34.47 32.40 33.05 L’ 33.95 38.38 40.40 39.80 B/G 38.90 34.47 33.40 33.16 33.05 D/K 38.90 34.47 32.40 33.05 I 38.90 34.47 32.90 32.348 CHANNEL COVERAGE BAND Low band Mid band FREQUENCY (MHz) 48.25 to 158.00 MHz + 160.00 to 442.00 MHz High band 442.00 to 863.25 MHz + Can cover down to 45.75 MHz (Ch A for Ireland) 3139 149 10330 3 Rev g : 16.02.2004 Philips RF Solutions Product specification Multi-Standard Desktop Video Module PINNING SYMBOL N.C. N.C. +5V SCL SDA AS_TU NC IF-AS 2 IF sound CVBS +5V, IF AF O/P GROUND nd FQ1216ME MK3 PIN 1 2 3 4 5 6 x x 9 10 11 12 13 14 DESCRIPTION (AGC Monitor) Do Not Connect * (Tuning Voltage Monitor) Do Not Connect * Supply Voltage Vb, Tuner section I²C-Serial Clock I²C-Serial Data I²C-Address Select_Tuner part (see Pg 20) Not Connected Not Connected Not Connected Second Address for IF circuit * see Pg 20) Second IF sound output Composite Video Baseband Signal Supply Voltage, IF section AF sound output Mounting Tags (TH1,TH2,TH3,TH4) * For process use only 3139 149 10330 4 Rev g : 16.02.2004 Philips RF Solutions Product specification Multi-Standard Desktop Video Module LIMITING VALUES Limiting values under operational conditions The tuners are guaranteed to function properly under the following conditions. SYMBOL VAGC PARAMETER AGC Voltage Monitor (not to be connected) (See Note 1) Tuning Voltage Monitor (not to be connected) Supply Voltage Vb Ripple susceptibility (see Note 2) 20Hz 1kHz 1kHz 200kHz Supply current SCL bus input voltage SDA Bus input voltage SDA Bus current (open collector) AS voltage (see Note 3) 2 IF sound output - Load impedanceD.C. A.C. Composite Video Baseband Signal - Load impedanceD.C. (see 10.3) (modulus) A.C. - Load time constant Supply voltage, IF section Ripple susceptibility (see Note 2) 20Hz 1kHz Current AF output - Load impedance D.C. A.C. 1kHz 500kHz 12 nd FQ1216ME MK3 PIN 1 MIN. 10 M TYP. MAX. UNIT Ω VT VS 2 3 4.75 5 5.25 2 10 150 5.25 5.25 5 5.25 V mVpp mVpp mA V V mA V kΩ kΩ Ω Ω ns V 80 4 5 6 11 1.0 1.0 75 75 -0.3 -0.3 -1.0 VSCL VSDA 100 13 4.75 5.25 100 14 100.0 10.0 2 10 160 mVpp mVpp mA kΩ kΩ Note 1 : Minimum impedance required is 10MΩ, otherwise AGC voltage is loaded down. For process only. Note 2 : Maximum allowable Ripple voltage superimposed on the +5V supply in the frequency range from 20 Hz to 500 kHz. Criteria : for TV : ∆f