MB2240BB

Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 FEATURES • 16-bit bus interface • Multiple VCC and GND pins minimize switching noise • ESD protection exceeds 2000 V per MIL STD 883 Method 3015 and 200 V per Machine Model dynamic power dissipation with high speed and high output drive. The MB2240 device is an inverting 16-bit buffer that is ideal for driving bus lines. The device features four Output Enables (1OE, 2OE, 3OE, 4OE), each controlling four of the 3-State outputs. • 3-State buffers • Live insertion/extraction permitted • Output capability: +64 mA/–32mA • Latch-up protection exceeds 500mA per Jedec JC40.2 Std 17 • Power-up 3-State DESCRIPTION The MB2240 high-performance BiCMOS device combines low static and QUICK REFERENCE DATA SYMBOL tPLH tPHL CIN COUT ICCZ PARAMETER Propagation delay nAx to nYx Input capacitance Output capacitance Total supply current CONDITIONS Tamb = 25°C; GND = 0V CL = 50pF; VCC = 5V VI = 0V or VCC VO = 0V or VCC 3-State Outputs disabled; VCC = 5.5V TYPICAL 3.2 4 7 65 UNIT ns pF pF µA ORDERING INFORMATION PACKAGES 52-pin plastic QFP TEMPERATURE RANGE –40°C to +85°C ORDER CODE MB2240BB DRAWING NUMBER 1418B PIN CONFIGURATION GND GND GND 1OE 1Y3 1Y2 1Y1 1Y0 1A0 1A1 1A2 1A3 20E LOGIC SYMBOL 44 43 41 40 47 38 37 35 34 45 1A0 1A1 1A2 1A3 1OE 2A0 2A1 2A2 2A3 2OE 2Y0 2Y1 2Y2 2Y3 1Y0 1Y1 1Y2 1Y3 48 49 51 52 32 3A0 31 3A1 29 28 3A2 3A3 3Y0 3Y1 3Y2 3Y3 8 9 11 12 52 51 VCC 1 2Y0 2 50 49 48 47 46 45 44 43 42 41 40 39 V CC 38 2A0 37 2A1 36 GND 35 2A2 2Y1 3 GND 4 2Y2 5 2Y3 6 GND 7 3Y0 8 3Y1 9 GND 10 3Y2 11 3Y3 12 VCC 13 14 15 16 4Y0 4Y1 GND MB2240 52-pin PQFP 34 2A3 33 GND 32 3A0 31 3A1 30 GND 29 3A2 28 3A3 27 V CC 17 18 19 20 4Y2 4Y3 GND 4OE 21 22 23 24 25 4A3 4A2 4A1 GND 3OE 26 4A0 August 23, 1993 È È È È È È 21 3OE 2 3 5 6 26 25 23 22 19 4A0 4A1 4A2 4A3 4OE 4Y0 4Y1 4Y2 4Y3 14 15 17 18 1 853–1624 10582 Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 FUNCTION TABLE INPUTS nOE L L H nAx L H X OUTPUTS nYx H L Z LOGIC SYMBOL (IEEE/IEC) 47 EN1 44 43 41 40 21 EN3 1 48 49 51 52 32 31 29 28 3 8 9 11 12 45 EN2 19 EN4 38 37 35 34 2 2 3 5 6 26 25 23 22 4 14 15 17 18 PIN DESCRIPTION PIN NUMBER 44, 43, 41, 40, 38, 37, 35, 34, 32, 31, 29, 28, 26, 25, 23, 22 14, 15, 17, 18, 8, 9, 11, 12, 2, 3, 5, 6, 48, 49, 51, 52 47, 45, 21, 19 4, 7, 10, 16, 20, 24, 30, 33, 36, 42, 46, 50 1, 13, 27, 39 SYMBOL 1A0 – 1A3, 2A0 – 2A3, 3A0 – 3A3, 4A0 – 4A3 4Y0 – 4Y3, 3Y0 – 3Y3, 2Y0 – 2Y3, 1Y0 – 1Y3 1OE, 2OE, 3OE, 4OE GND VCC NAME AND FUNCTION Data inputs Data outputs Output enables Ground (0V) Positive supply voltage August 23, 1993 2 Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 ABSOLUTE MAXIMUM RATINGS1, 2 SYMBOL VCC IIK VI IOK VOUT IOUT Tstg PARAMETER DC supply voltage DC input diode current DC input voltage3 VO < 0 output in Off or High state output in Low state VI < 0 CONDITIONS RATING –0.5 to +7.0 –18 –1.2 to +7.0 –50 –0.5 to +5.5 128 –65 to 150 UNIT V mA V mA V mA °C DC output diode current DC output voltage3 DC output current Storage temperature range NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The performance capability of a high-performance integrated circuit in conjunction with its thermal environment can create junction temperatures which are detrimental to reliability. The maximum junction temperature of this integrated circuit should not exceed 150°C. 3. The input and output voltage ratings may be exceeded if the input and output current ratings are observed. RECOMMENDED OPERATING CONDITIONS SYMBOL PARAMETER Min VCC VI VIH VIL IOH IOL ∆t/∆v Tamb DC supply voltage Input voltage High-level input voltage Low-level Input voltage High-level output current Low-level output current Input transition rise or fall rate Operating free-air temperature range 0 –40 4.5 0 2.0 0.8 –32 64 10 +85 LIMITS Max 5.5 VCC V V V V mA mA ns/V °C UNIT August 23, 1993 3 Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 DC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL PARAMETER TEST CONDITIONS Tamb = +25°C Min VIK Input clamp voltage VCC = 4.5V; IIK = –18mA VCC = 4.5V; IOH = –3mA; VI = VIL or VIH VOH High–level output voltage VCC = 5.0V; IOH = –3mA; VI = VIL or VIH VCC = 4.5V; IOH = –32mA; VI = VIL or VIH VOL II IOFF IPU/IPU IOZH IOZL ICEX IO ICCH ICCL ICCZ ∆ICC Additional supply current per input pin2 Quiescent supply current Low–level output voltage Input leakage current Power-off leakage current Power-up/down 3-state output current3 3–State output High current 3–State output Low current Output High leakage current Output current1 VCC = 4.5V; IOL = 64mA; VI = VIL or VIH VCC = 5.5V; VI = GND or 5.5V VCC = 0.0V; VO or VI ≤ 4.5V VCC = 2.1V; VO = 0.5V; VI = GND or VCC, V OE = Don’t care VCC = 5.5V; VO = 2.7V; VI = VIL or VIH VCC = 5.5V; VO = 0.5V; VI = VIL or VIH VCC = 5.5V; VO = 5.5V; VI = GND or VCC VCC = 5.5V; VO = 2.5V VCC = 5.5V; Outputs High, VI = GND or VCC VCC = 5.5V; Outputs Low, VI = GND or VCC VCC = 5.5V; Outputs 3–State; VI = GND or VCC Outputs enabled, one input at 3.4V, other inputs at VCC or GND; VCC = 5.5V –50 2.5 3.0 2.0 Typ –0.9 2.9 3.4 2.4 0.42 ±0.01 ±5.0 ±5.0 5.0 –5.0 5.0 –70 65 48 65 0.5 0.55 ±1.0 ±100 ±50 50 –50 50 –180 250 60 250 1.5 –50 Max –1.2 2.5 3.0 2.0 0.55 ±1.0 ±100 ±50 50 –50 50 –180 250 60 250 1.5 Tamb = –40°C to +85°C Min Max –1.2 V V V V V µA µA µA µA µA µA mA µA mA µA mA UNIT NOTES: 1. Not more than one output should be tested at a time, and the duration of the test should not exceed one second. 2. This is the increase in supply current for each input at 3.4V. 3. This parameter is valid for any VCC between 0V and 2.1V with a transistion time of up to 10µsec from VCC = 2.1V to VCC = 5V ± 10% a transistion time of up to 100µsec is permitted. AC CHARACTERISTICS GND = 0V; tR = tF = 2.5ns; CL = 50pF, RL = 500Ω LIMITS SYMBOL PARAMETER WAVEFORM Min tPLH tPHL tPZH tPZL tPHZ tPLZ Propagation delay nAx to nYx Output enable time to High and Low level Output disable time from High and Low level 1 2 2 1.0 1.4 1.1 1.4 1.2 1.3 Tamb = +25°C VCC = +5.0V Typ 3.1 3.5 3.2 4.1 4.0 3.6 Max 4.5 4.5 4.3 5.2 5.1 4.8 Tamb = –40°C to +85°C VCC = +5.0V ±0.5V Min 1.0 1.4 1.1 1.4 1.2 1.3 Max 5.1 5.1 5.2 6.0 5.8 5.5 ns ns ns UNIT August 23, 1993 4 Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 AC WAVEFORMS VM = 1.5V, VIN = GND to 3.0V nOE INPUT VM VM nAx INPUT VM VM nYx OUTPUT tPZL tPLZ 3.5V tPHL tPLH tPZH VM VOL + 0.3V VOL tPHZ VOH VOH – 0.3V nYx OUTPUT VM VM nYx OUTPUT VM 0V Waveform 1. Waveforms Showing the Input (An) to Output (Yn) Propagation Delays Waveform 2. Waveforms Showing the 3-State Output Enable and Disable Times TEST CIRCUIT AND WAVEFORMS VCC 7.0V VIN PULSE GENERATOR RT D.U.T CL RL VOUT RL 90% NEGATIVE PULSE VM 10% tTHL (tF) tTLH (tR) 90% tW VM 10% 90% AMP (V) 0V tTLH (tR) tTHL (tF) AMP (V) VM 10% tW 0V 90% Test Circuit for 3-State Outputs POSITIVE PULSE 10% VM SWITCH POSITION TEST tPLZ tPZL All other SWITCH closed closed open VM = 1.5V Input Pulse Definition DEFINITIONS RL = Load resistor; see AC CHARACTERISTICS for value. CL = Load capacitance includes jig and probe capacitance; see AC CHARACTERISTICS for value. RT = Termination resistance should be equal to ZOUT of pulse generators. INPUT PULSE REQUIREMENTS FAMILY Amplitude MB 3.0V Rep. Rate 1MHz tW 500ns tR 2.5ns tF 2.5ns August 23, 1993 5 Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 6 5 4 tPLH vs Temperature (Tamb) CL = 50pF, 1 Output Switching nAx to nYx MAX 5 4 3 4.5VCC Offset in ns 2 1 0 Adjustment of tPLH for Load Capacitance and # of Outputs Switching nAx to nYx 16 switching 8 switching 1 switching ns 3 5.5VCC 2 1 0 –55 –35 –15 5 25 45 65 85 105 125 MIN –1 –2 0 50 100 150 200 °C tPHL vs Temperature (Tamb) CL = 50pF, 1 Output Switching nAx to nYx pF Adjustment of tPHL for Load Capacitance and # of Outputs Switching nAx to nYx 7 6 5 4 ns 3 2 1 0 –55 –35 4 3 MAX 2 Offset in ns 4.5VCC 5.5VCC MIN –1 –2 1 0 16 switching 8 switching 1 switching –15 5 25 45 65 85 105 125 0 50 100 150 200 °C tPZH vs Temperature (Tamb) CL = 50pF, 1 Output Switching nOE to nYx MAX pF Adjustment of tPZH for Load Capacitance and # of Outputs Switching nOE to nYx 5 4 16 switching 3 8 switching 1 switching 2 1 0 –1 –2 6 5 4 4.5VCC ns 3 2 MIN 1 0 –55 –35 –15 5 25 45 65 85 105 125 5.5VCC Offset in ns 0 50 100 150 200 °C pF August 23, 1993 6 Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 7 6 5 4 ns 3 2 1 0 –55 –35 tPZL vs Temperature (Tamb) CL = 50pF, 1 Output Switching nOE to nYx MAX Adjustment of tPZL for Load Capacitance and # of Outputs Switching nOE to nYx 4 3 2 Offset in ns 1 0 –1 –2 16 switching 8 switching 1 switching 4.5VCC 5.5VCC MIN –15 5 25 45 65 85 105 125 0 50 100 150 200 °C tPHZ vs Temperature (Tamb) CL = 50pF, 1 Output Switching nOE to nYx pF Adjustment of tPHZ for Load Capacitance and # of Outputs Switching nOE to nYx 5 4 MAX Offset in ns 3 2 1 0 –1 –2 16 switching 8 switching 1 switching 8 7 6 5 ns 4 3 2 1 0 –55 –35 4.5VCC 5.5VCC MIN –15 5 25 45 65 85 105 125 0 50 100 150 200 °C tPLZ vs Temperature (Tamb) CL = 50pF, 1 Output Switching nOE to nYx pF Adjustment of tPLZ for Load Capacitance and # of Outputs Switching nOE to nYx 6 5 MAX 4 Offset in ns 3 2 1 0 –1 –2 16 switching 8 switching 1 switching 7 6 5 4 ns 3 2 1 0 –55 –35 4.5VCC 5.5VCC MIN –15 5 25 45 65 85 105 125 0 50 100 150 200 °C pF August 23, 1993 7 Philips Semiconductors Advanced BiCMOS Products Product specification 16-bit inverting buffer/line driver (3-State) MB2240 4 tTLH vs Temperature (Tamb) CL = 50pF, 1 Output Switching Adjustment of tTLH for Load Capacitance and # of Outputs Switching 11 10 9 8 7 6 5 4 3 2 1 0 –1 –2 –3 0 50 100 150 200 16 switching 8 switching 1 switching 3 ns 5.5VCC 2 1 –55 –35 –15 5 25 45 65 85 105 125 °C tTHL vs Temperature (Tamb) CL = 50pF, 1 Output Switching Offset in ns 4.5VCC pF Adjustment of tTHL for Load Capacitance and # of Outputs Switching 16 switching 8 switching 1 switching 3.0 5 4 2.5 Offset in ns 3 2 1 0 –1 ns 2.0 4.5VCC 5.5VCC 1.5 1 –55 –35 –15 5 25 45 65 85 105 125 –2 0 50 100 150 200 °C VOHV and VOLP vs Load Capacitance VCC = 5V, VIN = 0 to 3V 4.0 3.5 3.0 2.5 2.0 volts 1.5 1.0 0.5 0.0 –0.5 –1 0 50 100 150 200 125°C 25°C –55°C volts 3 2 1 0 –1 –2 0 50 125°C 25°C –55°C 6 5 4 pF VOHP and VOLV vs Load Capacitance VCC = 5V, VIN = 0 to 3V 125°C 25°C –55°C 125°C 25°C –55°C 100 150 200 pF pF August 23, 1993 8