PRS07G

PRS07 series Fast soft-recovery rectifiers Rev. 02 — 26 July 2004 Product data sheet 1. Product profile 1.1 General description Fast soft-recovery rectifier diodes in a cavity free cylindrical glass surface mounted package using Implotec™ technology. 1.2 Features s Low leakage current s Hermetically sealed package s Glass passivated s Small package. 1.3 Applications s Switched-mode power supplies s Snubber diode. 1.4 Quick reference data s VR ≤ 600 V (PRS07J) s VR ≤ 400 V (PRS07G) s VR ≤ 200 V (PRS07D) s VF ≤ 1.2 V s IF(AV) ≤ 1.7 A s trr ≤ 250 ns. 2. Pinning information Table 1: Pin a k Discrete pinning Description anode (a) k a 001aaa020 Simplified outline Symbol cathode (k) k a SOD87 SOD87 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 3. Ordering information Table 2: Ordering information Package Name PRS07D PRS07G PRS07J SOD87 Description Hermetically sealed glass surface mounted package; Implotec™ technology; 2 connectors Version SOD87 Type number 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VRRM repetitive peak reverse voltage PRS07D PRS07G PRS07J VRWM crest working reverse voltage PRS07D PRS07G PRS07J VR reverse voltage PRS07D PRS07G PRS07J IF(AV) average forward current Ttp = 65 °C; Figure 1; averaged over any 20 ms period Tamb = 45 °C; Figure 2; mounted on a printed-circuit board; Figure 6; averaged over any 20 ms period IFRM IFSM Tstg Tj repetitive peak forward current Ttp = 105 °C Tamb = 60 °C non-repetitive peak forward current tp = 8.3 ms half sine wave; Tj = 150 °C prior to surge; VR = VRRM(max) storage temperature junction temperature 200 400 600 1.7 0.6 V V V A A 200 400 600 V V V 200 400 600 V V V Conditions Min Max Unit −65 −65 13 5.5 20 +150 +150 A A A °C °C 9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 2 of 9 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 3 IF(AV) (A) 003aaa637 0.8 IF(AV) (A) 0.6 003aaa638 2 0.4 1 0.2 0 0 40 80 120 Ttp (°C) 160 0 0 40 80 160 120 Tamb (°C) a = 1.42; VR = VRRM(max); δ = 0.5. a = 1.42; VR = VRRM(max); δ = 0.5. Device mounted as shown in Figure 6. Fig 1. Average forward current as a function of tie-point temperature (including losses due to reverse leakage); maximum values. Fig 2. Average forward current as a function of ambient temperature (including losses due to reverse leakage); maximum values. 5. Thermal characteristics Table 4: Rth(j-tp) Rth(j-a) Thermal characteristics Conditions mounted on a printed-circuit board, 1.5 mm thick; copper thickness ≥ 40 µm; Figure 6 Min Typ 30 150 Max Unit K/W K/W thermal resistance from junction to tie-point thermal resistance from junction to ambient Symbol Parameter 9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 3 of 9 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 6. Characteristics Table 5: Characteristics Tj = 25 °C unless otherwise specified. Symbol Parameter Static characteristics VF forward voltage IF = 0.7 A; Figure 3 Tj = 25 °C Tj = 150 °C IR reverse current VR = VRRM; Figure 4 Tj = 25 °C Tj = 125 °C Dynamic characteristics Cd trr diode capacitance reverse recovery time f = 1 MHz; VR = 4 V switching from IF = 0.5 A to IR = 1 A; measured at IR = 0.25 A; Figure 7 9 250 pF ns 10 50 µA µA 1.2 1.05 V V Conditions Min Typ Max Unit 10 IF (A) 8 003aaa639 103 IR (µA) 003aaa622 102 6 4 Tj = 150 °C 2 25 °C 0 0 1 2 VF (V) 3 1 0 40 80 120 Tj (°C) 160 10 Tj = 25 °C. Tj = 25 °C. Fig 3. Forward current as a function of forward voltage; maximum values. Fig 4. Reverse current as a function of junction temperature; maximum values. 9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 4 of 9 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 102 Cd (pF) 003aaa623 50 4.5 10 50 2.5 1 1 10 102 VR (V) 103 Dimensions in mm 1.25 msb213 f = 1 MHz; Tj = 25 °C. Fig 5. Diode capacitance as a function of reverse voltage; typical values. Fig 6. Printed-circuit board for surface mounting. DUT + 10 Ω 25 V 1Ω 50 Ω IF (A) 0.5 trr 0 0.25 0.5 IR (A) 1.0 t mam057 Tj = 25 °C. Fig 7. Test circuit and reverse recovery time waveform definition. 9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 5 of 9 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 7. Package outline Hermetically sealed glass surface mounted package; ImplotecTM(1) technology; 2 connectors SOD87 k (2) a D1 D L DIMENSIONS (mm are the original dimensions) UNIT mm D 2.1 2.0 D1 2.0 1.8 H 3.7 3.3 L 0.3 H L 0 1 scale 2 mm Notes 1. Implotec is a trademark of Koninklijke Philips Electronics N.V. 2. The marking indicates the cathode. OUTLINE VERSION SOD87 REFERENCES IEC 100H03 JEDEC JEITA EUROPEAN PROJECTION ISSUE DATE 99-06-04 04-06-28 Fig 8. SOD87 package outline. 9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 6 of 9 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 8. Revision history Table 6: Revision history Release date Data sheet Change status notice Document number 9397 750 13204 Supersedes PRS07_SERIES_1 Document ID PRS07_SERIES_2 Modifications: 20040726 Product data sheet • • • • IF(AV) data and conditions revised in Section 1.4 “Quick reference data” and Table 3 “Limiting values” Figure 1, 2 and 3 updated Tstg and Tj data revised in Table 3 “Limiting values” VF data and conditions revised in Table 5 “Characteristics” 9397 750 12712 - PRS07_SERIES_1 20040203 Product data sheet 9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 7 of 9 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 9. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. Definitions Short-form specification — The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition — Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information — Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes — Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status ‘Production’), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 12. Trademarks Implotec — is a trademark of Koninklijke Philips Electronics N.V. 11. Disclaimers Life support — These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com 9397 750 13204 © Koninklijke Philips Electronics N.V. 2004. All rights reserved. Product data sheet Rev. 02 — 26 July 2004 8 of 9 Philips Semiconductors PRS07 series Fast soft-recovery rectifiers 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . General description. . . . . . . . . . . . . . . . . . . . . . Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . Quick reference data. . . . . . . . . . . . . . . . . . . . . Pinning information . . . . . . . . . . . . . . . . . . . . . . Ordering information . . . . . . . . . . . . . . . . . . . . . Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . Thermal characteristics. . . . . . . . . . . . . . . . . . . Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . Package outline . . . . . . . . . . . . . . . . . . . . . . . . . Revision history . . . . . . . . . . . . . . . . . . . . . . . . . Data sheet status . . . . . . . . . . . . . . . . . . . . . . . . Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Contact information . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 1 1 2 2 3 4 6 7 8 8 8 8 8 © Koninklijke Philips Electronics N.V. 2004 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 26 July 2004 Document order number: 9397 750 13204 Published in The Netherlands