0309109

https://www.phoenixcontact.com/us/products/0309109 Test disconnect terminal block - URTK/S-BEN 10 - 0309109 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Test disconnect terminal block, With slide, Connection method: Screw connection, Cross section: 0.5 mm² -16 mm² , AWG: 20 - 8, Width: 8.2 mm, Mounting type: NS 35/7,5, NS 35/15, NS 32, Color: gray Product Features  Easy and clear testing in current transformer secondary circuits can be performed using the test disconnect terminal blocks of the URTK/S range  On both sides of the disconnect point, the terminal block has a test socket which can also be used to switch across to neighboring terminal blocks   Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 29.7 g Custom tariff number 85369010 Country of origin Turkey Technical data General Number of levels 1 Number of connections 2 Nominal cross section 10 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Pollution degree 3 Overvoltage category III Insulating material group I 11/30/2015   Page 1 / 7 https://www.phoenixcontact.com/us/products/0309109 Test disconnect terminal block - URTK/S-BEN 10 - 0309109 Technical data General Connection in acc. with standard IEC 60947-7-1 Nominal current IN 57 A Maximum load current 76 A (with 16 mm² conductor cross section) Nominal voltage UN 500 V Open side panel ja Dimensions Length 61 mm Width 8.2 mm Height NS 35/7,5 58.5 mm Height NS 35/15 66 mm Height NS 32 63.5 mm Connection data Note Terminal point Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 16 mm² Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 10 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 6 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, solid min. 0.5 mm² 2 conductors with same cross section, solid max. 10 mm² 2 conductors with same cross section, stranded min. 0.5 mm² 2 conductors with same cross section, stranded max. 6 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 4 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, max. Cross section with insertion bridge, solid max. 10 mm² Cross section with insertion bridge, stranded max. 10 mm² Connection method Screw connection 11/30/2015   Page 2 / 7 https://www.phoenixcontact.com/us/products/0309109 Test disconnect terminal block - URTK/S-BEN 10 - 0309109 Technical data Connection data Stripping length 11 mm Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Disconnect element M3 0.6 Nm 0.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141126 eCl@ss 4.1 27141126 eCl@ss 5.0 27141126 eCl@ss 5.1 27141126 eCl@ss 6.0 27141126 eCl@ss 7.0 27141126 eCl@ss 8.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 11/30/2015   Page 3 / 7 https://www.phoenixcontact.com/us/products/0309109 Test disconnect terminal block - URTK/S-BEN 10 - 0309109 Approvals Approvals CSA / UL Recognized / cUL Recognized / PRS / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details CSA      mm²/AWG/kcmil 26-8 Nominal current IN 55 A Nominal voltage UN 600 V UL Recognized      mm²/AWG/kcmil 26-8 Nominal current IN 50 A Nominal voltage UN 600 V cUL Recognized      mm²/AWG/kcmil 26-8 Nominal current IN 50 A Nominal voltage UN 600 V PRS  EAC  11/30/2015   Page 4 / 7 https://www.phoenixcontact.com/us/products/0309109 Test disconnect terminal block - URTK/S-BEN 10 - 0309109 Approvals EAC  cULus Recognized  Drawings 11/30/2015   Page 5 / 7 https://www.phoenixcontact.com/us/products/0309109 Test disconnect terminal block - URTK/S-BEN 10 - 0309109 Circuit diagram Schematic diagram Simple current transformer test circuit a = normal operation b = measured value testing c = transformer short-circuit d = relay testing 11/30/2015   Page 6 / 7 https://www.phoenixcontact.com/us/products/0309109 Test disconnect terminal block - URTK/S-BEN 10 - 0309109 Circuit diagram a = open 1 = cover 2 = insertion bridge 9 = separating plate 10 = partition plate Phoenix Contact 2015 © - all rights reserved http://www.phoenixcontact.com 11/30/2015   Page 7 / 7