0707785

https://www.phoenixcontact.com/us/products/0707785 PE panel panel feed-through terminal block - HDFK 25-PE - 0707785 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PE panel panel feed-through terminal block, Connection method: Screw connection, Load current : 125 A, Cross section: 6 mm² - 35 mm², AWG 10 - 2, Connection direction of the conductor to plug-in direction: 0 °, Width: 15.1 mm, Color: green-yellow Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 69.27 g Custom tariff number 85369010 Country of origin Greece Technical data General Number of levels 1 Number of connections 2 Nominal cross section 25 mm² Color green-yellow Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-2 Nominal current IN 101 A Maximum load current 125 A 03/06/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/0707785 PE panel panel feed-through terminal block - HDFK 25-PE - 0707785 Technical data General Nominal voltage UN 500 V Open side panel No Number of positions 1 Dimensions Width 15.1 mm Connection data Note Terminal sleeve Connection side Level 1 ext. 1 Connection method Screw connection Note Note: Product releases, connection cross sections and notes on connecting aluminum cables can be found in the download area. Conductor cross section solid min. 6 mm² Conductor cross section solid max. 35 mm² Conductor cross section flexible min. 10 mm² Conductor cross section flexible max. 25 mm² Conductor cross section AWG min. 10 Conductor cross section AWG max. 2 Conductor cross section flexible, with ferrule without plastic sleeve min. 4 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 25 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 4 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 25 mm² 2 conductors with same cross section, solid min. 2.5 mm² 2 conductors with same cross section, solid max. 10 mm² 2 conductors with same cross section, stranded min. 4 mm² 2 conductors with same cross section, stranded max. 10 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 2.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 10 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 2.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 10 mm² sleeve, max. Stripping length 19 mm Internal cylindrical gage B8 Screw thread M5 Tightening torque, min 4 Nm Tightening torque max 4.5 Nm 03/06/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/0707785 PE panel panel feed-through terminal block - HDFK 25-PE - 0707785 Technical data Connection data Conductor cross section solid min. 6 mm² Conductor cross section solid max. 35 mm² Conductor cross section flexible min. 10 mm² Conductor cross section flexible max. 25 mm² Conductor cross section AWG min. 10 Conductor cross section AWG max. 2 Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-2 IEC / EN Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141131 eCl@ss 4.1 27141131 eCl@ss 5.0 27141134 eCl@ss 5.1 27141134 eCl@ss 6.0 27141134 eCl@ss 7.0 27141134 eCl@ss 8.0 27141134 ETIM ETIM 2.0 EC001283 ETIM 3.0 EC001283 ETIM 4.0 EC000901 ETIM 5.0 EC001283 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 03/06/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/0707785 PE panel panel feed-through terminal block - HDFK 25-PE - 0707785 Approvals Approvals Approvals UL Recognized / KEMA-KEUR / PRS / CCA / IECEE CB Scheme / CSA / EAC Ex Approvals Approvals submitted Approval details UL Recognized    B C mm²/AWG/kcmil 8-2 8-2 Nominal current IN 115 A 115 A Nominal voltage UN 600 V 600 V   B C mm²/AWG/kcmil 8-4 8-4 KEMA-KEUR  PRS  CCA  IECEE CB Scheme  CSA  03/06/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/0707785 PE panel panel feed-through terminal block - HDFK 25-PE - 0707785 Approvals   B C Nominal current IN 100 A 100 A Nominal voltage UN 600 V 600 V EAC  Drawings Dimensional drawing 38,5 Dimensional drawing 30 15,1 12 14 45 48,5 13,7 4,3 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/06/2016   Page 5 / 5