0790621

https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Bolt connection terminal block, With test socket screws for insertion of test plugs, nom. voltage: 800 V, nominal current: 41 A, connection method: Bolt connection, number of connections: 2, width: 11 mm, color: yellow, mounting type: NS 35/7,5, NS 35/15, NS 32 Key Commercial Data Packing unit 1 pc Minimum order quantity 50 pc GTIN GTIN 4046356649834 Weight per Piece (excluding packing) 21.600 g Custom tariff number 85369010 Country of origin India Technical data General Number of levels 1 Number of connections 2 Potentials 1 Nominal cross section 6 mm² Color yellow Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III 04/27/2020   Page 1 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Technical data General Insulating material group I Maximum power dissipation for nominal condition 1.31 W Maximum load current 41 A (with 6 mm² conductor cross section) Nominal current IN 41 A Nominal voltage UN 800 V (the nominal voltage applies to insulated cable lugs) Open side panel Yes Ambient temperature (operation) -60 °C ... 85 °C Ambient temperature (storage/transport) -25 °C ... 55 °C (For a short time, not exceeding 24 h, -60 to +70 °C) Moisture, minimum (storage/transport) 30 % Moisture, maximum (storage/transport) 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 2 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of tight fit on support Test passed Tight fit on carrier NS 32/NS 35 Setpoint 5N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed 04/27/2020   Page 2 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Technical data General Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 11 mm End cover width 1.5 mm Length 43.5 mm Height NS 35/7,5 52 mm Height NS 35/15 59.5 mm Height NS 32 57 mm Connection data Connection 1 level Connection method Bolt connection Stripping length The stripping length depends on the specification provided by the cable lug manufacturer. Connection in acc. with standard IEC 60947-7-1 Cable lug connection according to standard DIN 46234:1980-03 Min. cross section for cable lug connection 0.1 mm² Max. cross section for cable lug connection 6 mm² Hole diameter, min. 4.3 mm Cable lug width, max. 9.6 mm Bolt diameter 4 mm Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Cable lug connection according to standard DIN 46237:1970-07 Min. cross section for cable lug connection 0.5 mm² Max. cross section for cable lug connection 2.5 mm² AWG min 20 AWG max 14 Hole diameter, min. 4.3 mm Cable lug width, max. 9.6 mm Bolt diameter 4 mm Screw thread M4 04/27/2020   Page 3 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Technical data Connection data Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm Standards and Regulations Connection in acc. with standard CSA IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 4.0 27141100 eCl@ss 4.1 27141100 eCl@ss 5.0 27141100 eCl@ss 5.1 27141100 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 04/27/2020   Page 4 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Classifications ETIM ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 Approvals Approvals Approvals CSA / UL Recognized / EAC / EAC / EAC Ex Approvals Approval details CSA    http://www.csagroup.org/services-industries/product-listing/     Nominal voltage UN 600 V Nominal current IN 30 A mm²/AWG/kcmil 22-10  13631 04/27/2020   Page 5 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Approvals UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C Nominal voltage UN 600 V 600 V Nominal current IN 30 A 30 A  FILE E 60425 EAC      EAC-Zulassung EAC      RU CDE.A*30.B.01742 EAC      RU CDE.BL08.B.00540 Accessories Accessories DIN rail DIN rail perforated - NS 32 PERF 2000MM - 1201002 DIN rail perforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015 DIN rail, unperforated, G profile, width: 32 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/27/2020   Page 6 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     04/27/2020   Page 7 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/27/2020   Page 8 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     04/27/2020   Page 9 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     04/27/2020   Page 10 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End clamp - E/UK - 1201442 End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35, color: gray     End clamp - E/UK 1 - 1201413 End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray     End cover End cover - D-OTTA 6 - 0790417 End cover, length: 43.5 mm, width: 1.5 mm, height: 40.8 mm, color: gray     04/27/2020   Page 11 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories Insertion bridge Insertion bridge - EB 2-OTTA 6 - 0790608 Insertion bridge, pitch: 11 mm, number of positions: 2, color: gray     Insertion bridge - EB 3-OTTA 6 - 3026036 Insertion bridge, pitch: 11.1 mm, number of positions: 3, color: gray     Insertion bridge - EB 4-OTTA 6 - 3026049 Insertion bridge, pitch: 11.1 mm, number of positions: 4, color: gray     Insertion bridge - EB 5-OTTA 6 - 3026050 Insertion bridge, pitch: 11.1 mm, number of positions: 5, color: gray     Insertion bridge - EB 7-OTTA 6 - 3026052 Insertion bridge, pitch: 11.1 mm, number of positions: 7, color: gray     04/27/2020   Page 12 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories Insertion bridge - EB 10- OTTA 6 - 0790420 Insertion bridge, pitch: 11.1 mm, number of positions: 10, color: gray     Labeled terminal marker Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027 Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     04/27/2020   Page 13 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories Marker for terminal blocks - ZB10,LGS:U-N - 1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER, Horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.15 x 10.5 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48     Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36     Partition plate Partition plate - ATP-OTTA 6 - 0790475 Partition plate, length: 69 mm, width: 1.5 mm, height: 40.8 mm, color: gray     Screwdriver tools Screwdriver - SZS 1,0X6,5 VDE - 1205079 Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip     04/27/2020   Page 14 / 15 https://www.phoenixcontact.com/us/products/0790621 Bolt connection terminal block - OTTA 6-P/P YE - 0790621 Accessories Short-circuit connector Short-circuit connector - KSS 10 - 0310541 Short-circuit connector, pitch: 10 mm, number of positions: 2, color: black     Terminal marking Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10     Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48     Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 04/27/2020   Page 15 / 15