0852012

https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://download.phoenixcontact.com) Feed-through terminal block, Connection type: Screw connection, Slip-on connection, Cross section: 0.2 mm² - 4 mm², AWG :24- 14, Width: 6.2 mm, Color: gray, Mounting: NS 35/7,5, NS 35/15 Key commercial data Packing unit 11 GTIN Weight per Piece (excluding packing) 9.43 GRM Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 4 Color gray Insulating material PA Inflammability class according to UL 94 V2 Maximum load current 32 A (with 4 mm² conductor cross section) Rated surge voltage 8 kV Pollution degree 3 Surge voltage category III Insulating material group I Nominal current IN 24 A Nominal voltage UN 800 V Open side panel ja 18.11.2013   Page 1 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Technical data Dimensions Width 6.2 mm Length 72 mm Height NS 35/7,5 39.5 mm Height NS 35/15 47 mm End cover width 2.2 mm Connection data Connection method Screw connection Stripping length 8 mm Tightening torque, min 0.6 Nm Tightening torque max 0.8 Nm Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Conductor cross section stranded, with ferrule without plastic sleeve min. 0.25 mm² Value 0.25 mm² Conductor cross section stranded, with ferrule without plastic sleeve max. 4 mm² Value 4 mm² Conductor cross section stranded, with ferrule with plastic sleeve min. 0.25 mm² Value 0.25 mm² Conductor cross section stranded, with ferrule with plastic sleeve max. 2.5 mm² Value 2.5 mm² 2 conductors with same cross section, solid min. 0.2 mm² 2 conductors with same cross section, solid max. 1.5 mm² 2 conductors with same cross section, stranded min. 0.2 mm² 2 conductors with same cross section, stranded max. 1.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.25 mm² Value 0.25 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 1 mm² Value 1 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. Value 0.5 mm² 18.11.2013   Page 2 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Technical data Connection data 2 conductors with same cross section, stranded, TWIN ferrules with plastic 1.5 mm² sleeve, max. Value 1.5 mm² Cross section with insertion bridge, solid max. 2.5 mm² Cross section with insertion bridge, stranded max. 2.5 mm² Connection method Slip-on connection Classifications eCl@ss eCl@ss 4.0 27141120 eCl@ss 4.1 27141120 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141120 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 ETIM ETIM 2.0 EC000897 ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals GOST / GOST 18.11.2013   Page 3 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Approvals Ex Approvals Approvals submitted Approval details GOST  GOST  Accessories Accessories Bridge Insertion bridge - EB 2- 6 - 0201155 Insertion bridge, Number of positions: 2, Color: gray     Insertion bridge - EB 3- 6 - 0201142 Insertion bridge, Number of positions: 3, Color: gray     18.11.2013   Page 4 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Accessories Insertion bridge - EB 10- 6 - 0201139 Insertion bridge, Number of positions: 10, Color: gray     End block End clamp - CLIPFIX 35 - 3022218 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray     End clamp - CLIPFIX 35-5 - 3022276 Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray     End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     End cover End cover - D/TP-VBS - 0851026 End cover, Length: 80 mm, Width: 2.2 mm, Color: gray     18.11.2013   Page 5 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Accessories Labeled terminal marker Zack marker strip - ZB 6 CUS - 0824992 Zack marker strip, Can be ordered: Strip, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 CUS - 0824589 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 CUS - 0829602 Marker for terminal blocks, Can be ordered: By sheet, white, Labeled according to customer specifications, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Mounting rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm     18.11.2013   Page 6 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Accessories DIN rail - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail 35 mm (NS 35)     DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver     DIN rail - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m     18.11.2013   Page 7 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Accessories DIN rail - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m     DIN rail - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm     DIN rail - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m     18.11.2013   Page 8 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Accessories DIN rail - NS 35/15 WH PERF 2000MM - 0806602 DIN rail 35 mm (NS 35)     DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail 35 mm (NS 35)     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm     DIN rail - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m     DIN rail - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m     18.11.2013   Page 9 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Accessories DIN rail - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     DIN rail - NS 35/15-2,3 UNPERF 2000MM - 1201798 DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m     Screwdriver tools Screwdriver - SZS 0,6X3,5 - 1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip     Terminal marking Marker cards - SBS 6:UNBEDRUCKT - 1007222 Marker cards, Card, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap into flat marker groove, For terminal block width: 6.2 mm, Lettering field: 6 x 6.1 mm     18.11.2013   Page 10 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Accessories Zack marker strip - ZB 6:UNBEDRUCKT - 1051003 Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 6.15 x 10.5 mm     Marker for terminal blocks - UC-TM 6 - 0818085 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 6 - 0828736 Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: THERMOMARK CARD PLUS, THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, Mounting type: Snap into tall marker groove, For terminal block width: 6.2 mm, Lettering field: 5.6 x 10.5 mm     Drawings 18.11.2013   Page 11 / 12 https://www.phoenixcontact.com/us/products/0852012 Feed-through terminal block - VBST 4-FS(6-2,8-0,8) - 0852012 Circuit diagram 1 = cover with partition plate 2 = insertion bridge © Phoenix Contact 2013 - all rights reserved http://www.phoenixcontact.com 18.11.2013   Page 12 / 12