0900139

https://www.phoenixcontact.com/us/products/0900139 Electronic device circuit breaker - ECP-E2-1A - 0900139 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Electronic device circuit breaker, Number of positions: 1, Connection method: Screw connection, Width: 12.5 mm, Fuse type: Electronic, Fuse type: Automatic device, Mounting type: On base element, Color: black Why buy this product ■ ■ ■ ■ ■ ■ Includes the advantages of current limitation Sufficient supply of all error-free load circuits Output voltage of switched-mode power supply unit remains stable Responds faster than switched-mode power supply unit to overload and short circuit In addition, the ECP-E2 can be controlled remotely by the control input (12), e.g., by means of a PLC Application - all aspects of the switched-mode power supply unit Key Commercial Data Packing unit 1 STK Weight per Piece (excluding packing) 44.0 g Custom tariff number 85363030 Country of origin Germany Technical data General Installation instructions When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor). Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC). Parallel connection of multiple circuit breakers is not permitted. Mounting type On base element Color black 08/01/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/0900139 Electronic device circuit breaker - ECP-E2-1A - 0900139 Technical data General Number of positions 1 Overvoltage category II Insulating material PA66/6 Flammability rating according to UL 94 V0 Electrical data Fuse Electronic Fuse type Automatic device Rated surge voltage 0.5 kV Operating voltage 24 V DC 24 V DC () 18 V DC ... 32 V DC Nominal current IN 1A Required backup fuse not required, integrated failsafe element Dielectric strength max. 32 V DC (Load circuit) Degree of pollution 2 Overvoltage category II Insulating material group I Switching capacity ICN Active current limitation Closed-circuit current range I0 typ. 25 mA ±5 mA (When switched on) Dimensions Height 60 mm Width 12.5 mm Depth 70 mm Height NS 35/7,5 144 mm Height NS 35/15 151.5 mm Complete module height 115 mm Complete module width 38 mm Complete module depth 112.5 mm Ambient conditions Degree of protection IP30 (Actuation area) Ambient temperature (operation) 0 °C ... 50 °C (non-condensing) Connection data Connection method Screw connection Standards and Regulations Standards/specifications UL 2367 08/01/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/0900139 Electronic device circuit breaker - ECP-E2-1A - 0900139 Technical data Standards and Regulations UL 508 CSA 22.2 No. 14 Drawings Block diagram Diagram Stop point typ. 1,1 x l N On/Off 14 12 2 Switching time [s] GND (-) SC SO