0912034

https://www.phoenixcontact.com/us/products/0912034 Electronic device circuit breaker - ECP 4 - 0912034 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Electronic device circuit breaker, Connection method: Screw connection, Width: 12.5 mm, Fuse type: Electronic, Fuse type: Automatic device, Mounting type: On base element, Color: black Why buy this product ■ ■ ■ ■ ■ ■ ■ Can be plugged onto TMCP SOCKET M base Design width of just 12.5 mm Selective protection of all 24 V DC load circuits at switched-mode power supply units Capacitive loads can be switched on and loads are only switched off in the event of an overload or short circuit Operating or error state indicated by LED and integrated signal contacts Residual current always limited to 1.8 times the nominal current Combination of active electronic current limitation and proven circuit breaker technology including electrical isolation Key Commercial Data Packing unit 1 STK Minimum order quantity 5 STK Custom tariff number 85362010 Country of origin Germany Technical data General Installation instructions When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80 % due to the thermal effect during continuous operation (100 % operating factor). Parallel connection of multiple load outputs is not permitted. Mounting type On base element Color black 08/01/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/0912034 Electronic device circuit breaker - ECP 4 - 0912034 Technical data General Overvoltage category II Insulating material PPS Flammability rating according to UL 94 V0 Electrical data Fuse Electronic Fuse type Automatic device Rated surge voltage 0.5 kV Operating voltage 24 V DC 18 V DC ... 32 V DC Nominal current IN 4A Required backup fuse not required, integrated failsafe element Dielectric strength 1000 V AC (Actuation area) 500 V AC (Installation area) 500 V AC (Load circuit signal contact) Degree of pollution 2 Overvoltage category II Insulating material group IIIa Switching capacity ICN Active current limitation Closed circuit current I0 typ. 13 mA Dimensions Height 60 mm Width 12.5 mm Depth 70 mm Height NS 35/7,5 144 mm Height NS 35/15 151.5 mm Complete module height 115 mm Complete module width 38 mm Complete module depth 147.5 mm Ambient conditions Degree of protection IP30 (Actuation area) Ambient temperature (operation) 0 °C ... 50 °C (non-condensing) Connection data Connection method Screw connection Drawings 08/01/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/0912034 Electronic device circuit breaker - ECP 4 - 0912034 14 12 2 SO Control SC On/Off LOAD LINE (+) DC 24 V GND (-) On/off Oper.stat. GN/OG SI LOAD (L+) RSense 3A 6A Nominal current IN SO SI SC Signal output Current Short circuit/ measurement overload LINE (+) Control Unit 1 11 13 LINE Circuit diagram Control electronics Block diagram LOAD (+) GND (-) Load output Functional Diagram drawing 1 = Selective circuit breaker 2 = Socket termination element 3 = Modular socket element 4 = Socket termination element Classifications eCl@ss eCl@ss 4.0 27141116 eCl@ss 4.1 27141116 eCl@ss 5.0 27141116 eCl@ss 5.1 27141116 eCl@ss 6.0 27141116 eCl@ss 7.0 27141116 eCl@ss 8.0 27141116 eCl@ss 9.0 27141116 08/01/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/0912034 Electronic device circuit breaker - ECP 4 - 0912034 Classifications ETIM ETIM 2.0 EC000899 ETIM 3.0 EC000899 ETIM 4.0 EC000899 ETIM 5.0 EC000899 UNSPSC UNSPSC 6.01 30211812 UNSPSC 7.0901 39121411 UNSPSC 11 39121411 UNSPSC 12.01 39121411 UNSPSC 13.2 39121411 Approvals Approvals Approvals VDE Zeichengenehmigung / EAC / EAC Ex Approvals Approvals submitted Approval details VDE Zeichengenehmigung  EAC  EAC  Accessories Additional products 08/01/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/0912034 Electronic device circuit breaker - ECP 4 - 0912034 Accessories Box mounting base - TMCP SOCKET M - 0916589 Modular socket element, 2-position, for holding two circuit breakers, each with a single position     End cover - TMCP CONNECT LR - 0916592 End cover, Length: 115 mm, Width: 6 mm, Color: black     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 08/01/2016   Page 5 / 5