PV-C4M-S 2,5-6 (-) - Connector
1020775
https://www.phoenixcontact.com/us/products/1020775
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
Connector, Range of articles: Sunclix, housing material: PPE, color: black, number of positions:
1, min. conductor cross section: 2.5 mm2, max. conductor cross section: 6 mm2, rated voltage:
1500 V DC, rated current: 35 A, Connection method: Spring-cage, Contact connection type: Pin,
min. cable diameter: 5 mm, max. cable diameter: 8 mm
Your advantages
• Convenient, secure spring connection technology
• High yield, thanks to silver-plated contacts
• Convenient release without a special tool
• One-piece DC connector
Commercial data
Item number
1020775
Packing unit
1 pc
Minimum order quantity
50 pc
Sales key
AB02
Product key
ABLBBA
GTIN
4055626511283
Weight per piece (including packing)
19.73 g
Weight per piece (excluding packing)
19.602 g
Customs tariff number
85359000
Country of origin
IN
Jan 8, 2024, 9:39 AM
Page 1 (7)
PV-C4M-S 2,5-6 (-) - Connector
1020775
https://www.phoenixcontact.com/us/products/1020775
Technical data
Notes
Safety note
Safety note
• WARNING: Commission properly functioning products only.
The products must be regularly inspected for damage.
Decommission defective products immediately. Replace
damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and
operate the product. They must observe the following safety
notes. The qualified personnel must be familiar with the basics of
electrical engineering. They must be able to recognize and
prevent danger. The relevant symbol on the packaging indicates
that only personnel familiar with electrical engineering are
allowed to install and operate the product.
WARNING: The connectors may not be plugged in or
disconnected under load. Ignoring the warning or improper use
may damage persons and/or property.
• The products are suitable for applications in plant, controller,
and electrical device engineering.
• Assembled products may not be manipulated or improperly
opened.
• Only use mating connectors that are specified in the technical
data of the standards listed (e.g. the ones listed in the product
accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party
manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector
housings must be grounded
• Ensure that the protective or functional ground has been
properly connected.
• Observe the corresponding technical data. You will find
information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the
download page at phoenixcontact.com/products must be
observed for this product.
• Use a protective cap to protect connectors that are not in use.
The suitable accessories are available online in the accessory
section of the product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the
ambient conditions, the surface of the connector can continue to
warm up. In this case, the user is responsible for posting
warnings (e.g. DIN EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and
interlocked.
• Ensure that when laying the cable, the tensile load on the
connectors does not exceed the upper limit specified in the
standards.
Jan 8, 2024, 9:39 AM
Page 2 (7)
PV-C4M-S 2,5-6 (-) - Connector
1020775
https://www.phoenixcontact.com/us/products/1020775
• Observe the minimum bending radius of the cable. Lay the
cable without twisting it.
Product properties
Product type
Photovoltaic connector
Product family
SUNCLIX
Number of positions
1
Insulation characteristics
Protection class
II
Degree of pollution
2
Electrical properties
Rated voltage (II/2)
1000 V
Rated voltage (III/2)
1500 V
Nominal voltage ATD
1500 V DC (III/2) in accordance with IEC 62852:2014/AMD1:202
0
1500 V DC in accordance with UL 6703
Rated surge voltage
16 kV
Rated surge voltage (II/2)
12 kV
Rated surge voltage (III/2)
12 kV
Rated surge voltage (III/3)
16 kV
Rated current (6.0 mm²)
35 A (in accordance with IEC 62852:2014-11)
Rated current (4.0 mm²)
30 A (in accordance with IEC 62852:2014-11)
Rated current (2.5 mm²)
20 A (in accordance with IEC 62852:2014-11)
Rated current
30 A (in accordance with UL 6703)
35 A (in accordance with UL 6703)
50 A (in accordance with UL 6703)
Contact resistance
0.45 mΩ
Contact resistance
≤ 0.45 mΩ (when plugged in (without cable))
Connection data
Connection method
Spring-cage
Stripping length
15 mm
Dimensions
Dimensional drawing
Width
20 mm
Height
27.4 mm
Length
82.6 mm
Material specifications
Jan 8, 2024, 9:39 AM
Page 3 (7)
PV-C4M-S 2,5-6 (-) - Connector
1020775
https://www.phoenixcontact.com/us/products/1020775
Color
black
Color of the housing part
black
Material
PPE
Flammability rating according to UL 94
V0
Insulating material group
II
Insulating material
mPPE
Cable seal material
EPDM
Contact material
Cu
Contact surface material
Ag
Contact carrier material
PA 6.6 V0
O-ring material
Elastosil LR 3065/50
Housing material
PPE
Cable/line
Cable type
in accordance with IEC 62930
External cable diameter ()
5 mm ... 8 mm
External cable diameter
5 mm ... 8 mm
Single wire, cross section
2.5 mm² 6 mm² 14 AWG 10 AWG
Stripping length of the individual wire
15 mm
Cable pull-out force
> 80 N
Mechanical properties
Mechanical data
Insertion/withdrawal cycles
100
Insertion force
45 N ±10 N
Withdrawal force
250 N ±50 N (when locked)
Environmental and real-life conditions
Ambient conditions
Degree of protection (when plugged in)
IP66 / IP68 (2 m / 24 h)
Degree of protection (not plugged in)
IP20
Degree of protection
IP66 / IP68 (2 m / 24 h)
Ambient temperature (operation)
-40 °C ... 85 °C (dependent on the derating curve)
Ambient temperature (assembly)
-5 °C ... 50 °C
Standards and regulations
Standards/specifications
IEC 62852:2014/AMD1:2020
Mounting
Connection method
Spring-cage
Jan 8, 2024, 9:39 AM
Page 4 (7)
PV-C4M-S 2,5-6 (-) - Connector
1020775
https://www.phoenixcontact.com/us/products/1020775
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1020775
UL Recognized
Approval ID: E477377-20180202
Nominal voltage UN
Nominal current IN
Cross section AWG
Cross section mm2
1500 V
50 A
- 10
-
TÜV Rheinland
Approval ID: R60169305 0001
Jan 8, 2024, 9:39 AM
Page 5 (7)
PV-C4M-S 2,5-6 (-) - Connector
1020775
https://www.phoenixcontact.com/us/products/1020775
Classifications
ECLASS
ECLASS-11.0
27440102
ECLASS-12.0
27440116
ECLASS-13.0
27440116
ETIM
ETIM 8.0
EC002635
UNSPSC
UNSPSC 21.0
39121400
Jan 8, 2024, 9:39 AM
Page 6 (7)
PV-C4M-S 2,5-6 (-) - Connector
1020775
https://www.phoenixcontact.com/us/products/1020775
Environmental product compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 9:39 AM
Page 7 (7)