1021816

https://www.phoenixcontact.com/gb/products/1021816 Connector - SACC-P12MR-5CT-CM SH - 1021816 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Connector, Universal, 5-position, shielded, Plug angled M12 Push-Pull, A-coded, Crimp connection, knurl material: PA 6.6, external cable diameter 4.5 mm ... 7.5 mm, without crimp contacts Why buy this product  Plug and Produce: convenient and secure connection, thanks to the manufacturer-independent locking system  Extremely compact, thanks to the small wiring space and high contact density  Clear feedback: the connector springs back when not snapped into place correctly  Safely shielded: reliable shield connection even under extreme mechanical strain  Robust connection: suitable for railway applications with high shock and vibration loads  Automated processing possible Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626514659 Weight per Piece (excluding packing) 43.900 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Wrench size, union nut 15 mm Diameter housing 22 mm Length 53 mm External cable diameter 4.5 mm ... 7.5 mm Stripping length of the sheath 18 mm Stripping length of the individual wire 4 mm +0,5 mm Ambient conditions 09/07/2018   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1021816 Connector - SACC-P12MR-5CT-CM SH - 1021816 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Degree of protection IP65 IP67 IP68 IP69K General Rated current at 40°C 4A Rated voltage 48 V AC 60 V DC Number of positions 5 Insulation resistance ≥ 100 Ω Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 In line with Shock, vibration EN 50155:2001 Signal type/category Universal Status display No Overvoltage category III Degree of pollution 3 Connection method Crimp connection Conductor cross section 0.34 mm² ... 1 mm² (flexible) Conductor cross section AWG 22 ... 18 (flexible) Wire diameter incl. insulation ≤ 2.55 mm (Contact 5 up to max. 2.0 mm) Insertion/withdrawal cycles ≥ 100 Torque 1.5 Nm (Screw plug insert with sleeve housing as far it will go) 4 Nm (Pressure nut with coupling sleeve) Material Flammability rating according to UL 94 V0 Contact carrier material PA 6.6 Material of grip body Zinc die-cast, nickel-plated Material, knurls PA 6.6 Sealing material NBR Standards/regulations PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DIN EN 45545-2 (Risk level HL1 - HL3) Cable Standards/specifications M12 connector IEC 61076-2-101 In line with Shock, vibration EN 50155:2001 Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 09/07/2018   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1021816 Connector - SACC-P12MR-5CT-CM SH - 1021816 Technical data Standards and Regulations Standard designation Shock, vibration Standards/regulations EN 50155:2001 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram 4 Functional drawing 4 - 4,5 18 3 5 Ø 4,5 - 7,5 mm 1 1 0,34 - 1,00 mm² Click 3 2 2 14 3 5 6 1,5 Nm 4 4 Nm 15 Dimensional drawing Ø22 !53 14 15 !38 Classifications eCl@ss eCl@ss 9.0 27440102 ETIM ETIM 5.0 EC002062 ETIM 6.0 EC002062 09/07/2018   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1021816 Connector - SACC-P12MR-5CT-CM SH - 1021816 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      RU CDE.AI30.B.01102 Accessories Accessories Crimp contact Crimp contact - CC1,0-TS-1,00M AU - 1423645 Crimp contact,  contact diameter: 1 mm,  turned,  Pin,  contact material: CuZn,  contact surface: Ni/Au,  connection cross section: 0.34 mm² ... 1 mm²  AWG 22 ... 18     Crimping tool Crimping pliers - CRIMPFOX-TC MP - 1212510 Crimping pliers, for turned contacts, universal cross section setting, up to a maximum of 2.5 mm², digital display with 0.01 mm increments, pressure lock can be unlocked, including positioning tool     Electronics pliers Diagonal cutter - MICROFOX-SB - 1212489 Electronic diagonal cutter, round head, without chamfer, with opening spring, mirror-polished and oiled, 2-component grip, cutting capacity: soft 0.2 - 2.0 mm; medium hard 1.2 mm; hard 0.5 mm diameter     09/07/2018   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1021816 Connector - SACC-P12MR-5CT-CM SH - 1021816 Accessories Stripping tool Stripping tool - WIREFOX-D 13 - 1212162 Stripping tool, for stripping installation lines of Ø 8 - 13 mm , e.g. NYM 3 x 1.5 mm² to 5 x 2.5 mm², single line stripping 0.2 mm² - 4 mm² , with longitudinal cut blade and sliding knife     Stripping tool - WIREFOX SAC - 1212623 Stripping pliers, for halogen-free sensor/actuator cables (SAC cables), with PUR and PVC insulation, from Ø of 4.4 to 7 mm, any stripping length     Necessary add-on products Crimp contact - CC1,0-TS-1,00M AU - 1423645 Crimp contact,  contact diameter: 1 mm,  turned,  Pin,  contact material: CuZn,  contact surface: Ni/Au,  connection cross section: 0.34 mm² ... 1 mm²  AWG 22 ... 18     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 09/07/2018   Page 5 / 5