1027666

https://www.phoenixcontact.com/gb/products/1027666 Flush-type connector - SACC-DSI-FS-5CON-M16/0,5 PP - 1027666 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Flush-type connector, 5-position, Socket, straight, M12-Push-Pull, A-coded, Rear mounting, M16 x 1.5, Individual wires, cable length: 0.5 m Why buy this product  Established M12 standard for secure transmission of signals, data, and power  Easy and quick cabling of devices and systems in hard-to-reach areas  Manufacturer-independent M12 push-pull locking system for maximum availability  Reliable shield connection even under extreme mechanical strain Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626533384 Weight per Piece (excluding packing) 29.700 g Custom tariff number 85444290 Country of origin Germany Note Made to Order (non-returnable) Technical data Dimensions Length of cable 0.5 m Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using 09/07/2018   Page 1 / 4 https://www.phoenixcontact.com/gb/products/1027666 Flush-type connector - SACC-DSI-FS-5CON-M16/0,5 PP - 1027666 Technical data General a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 60 V Rated surge voltage 2.5 kV Number of positions 5 Coding A-coded Standards/regulations M12 connector In line with Status display No Overvoltage category II Degree of pollution 3 Connection method Individual wires Insertion/withdrawal cycles > 100 Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material of grip body Nickel-plated brass Material, knurls Nickel-plated brass Material Brass, nickel-plated Sealing material NBR/FKM Additional material specifications PU 2K (Grout material) Cable Cable type TPE litz wire Conductor cross section 0.34 mm² AWG signal line 22 Conductor structure signal line 7x 0.25 mm Core diameter including insulation 1.2 mm ±0.07 mm Thickness, insulation 0.21 mm Wire colors Brown, white, blue, black, gray Conductor material Tin-plated Cu litz wires Standards/specifications M12 connector In line with Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) 09/07/2018   Page 2 / 4 https://www.phoenixcontact.com/gb/products/1027666 Flush-type connector - SACC-DSI-FS-5CON-M16/0,5 PP - 1027666 Technical data Standards and Regulations Standard designation M12 connector Flammability rating according to UL 94 V0 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing Ød l Dimensional drawings can be found under Downloads Classifications eCl@ss eCl@ss 8.0 27440103 eCl@ss 9.0 27440103 ETIM ETIM 6.0 EC002061 Approvals Approvals Approvals cULus Recognized Ex Approvals Approval details 09/07/2018   Page 3 / 4 https://www.phoenixcontact.com/gb/products/1027666 Flush-type connector - SACC-DSI-FS-5CON-M16/0,5 PP - 1027666 Approvals cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20140616     Nominal voltage UN 60 V Nominal current IN 4A mm²/AWG/kcmil 22-20 Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 09/07/2018   Page 4 / 4