1027669

SACC-DSI-FS-5CON-M16-L180 PP - Device connector rear mounting 1027669 https://www.phoenixcontact.com/us/products/1027669 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, 5-position, Socket, straight, M12-Push-pull external locking, coding: A, Rear mounting, M16, Wave soldering, Alternative product in accordance with RoHS II without Exemption 6c (Pb IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Order information: Lock nut is included in the scope of delivery General Push-pull external locking Mounting Mounting type Rear mounting M16 With flat nut Assembly note With flat nut Product properties Product type Circular connectors (device side) Number of positions 5 Shielded no Coding A Thread type M12 Data management status Article revision 07 Insulation characteristics Overvoltage category II Degree of pollution 3 Dimensions Length of the solder pin 6 mm 6 mm Material specifications Material Brass, nickel-plated Flammability rating according to UL 94 V0 Seal material NBR/FKM Material of grip body Brass, nickel-plated Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Electrical properties Oct 12, 2024, 4:19 PM Page 2 (6) SACC-DSI-FS-5CON-M16-L180 PP - Device connector rear mounting 1027669 https://www.phoenixcontact.com/us/products/1027669 Rated surge voltage 1.5 kV Nominal voltage UN 60 V Nominal current IN 4A Connection data Conductor connection Connection method Wave soldering Contact connection type Socket Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type Push-pull external locking Coding A Environmental and real-life conditions Ambient conditions Degree of protection IP67 IP65/IP67 Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-010 Note Push-pull (type 2) Oct 12, 2024, 4:19 PM Page 3 (6) SACC-DSI-FS-5CON-M16-L180 PP - Device connector rear mounting 1027669 https://www.phoenixcontact.com/us/products/1027669 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1027669  cULus Recognized Approval ID: E221474-20140616 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 60 V 4A - - Oct 12, 2024, 4:19 PM Page 4 (6) SACC-DSI-FS-5CON-M16-L180 PP - Device connector rear mounting 1027669 https://www.phoenixcontact.com/us/products/1027669 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Oct 12, 2024, 4:19 PM Page 5 (6) SACC-DSI-FS-5CON-M16-L180 PP - Device connector rear mounting 1027669 https://www.phoenixcontact.com/us/products/1027669 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 9e4d4415-129f-45b8-b3a6-06d6a4e74527 Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Oct 12, 2024, 4:19 PM Page 6 (6)