1027696

SACC-DSI-FSD-4CON-M16-L180 PP - Device connector rear mounting 1027696 https://www.phoenixcontact.com/us/products/1027696 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector rear mounting, 4-position, Socket, straight, M12-Push-pull external locking, coding: D, Rear mounting, M16 x 1.5, Wave soldering, Alternative product in accordance with RoHS II without Exemption 6c (Pb IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Order information: Lock nut is included in the scope of delivery General Push-pull external locking Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly note With flat nut Product properties Product type Circular connectors (device side) Application Data Signal Number of positions 4 Shielded yes Coding D Thread type M12 Data management status Article revision 07 Insulation characteristics Overvoltage category II Degree of pollution 3 Dimensions Length of the solder pin 6 mm 6 mm Material specifications Material Brass, nickel-plated Flammability rating according to UL 94 V0 Seal material NBR/FKM Material of grip body Brass, nickel-plated Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Brass, nickel-plated Nov 6, 2024, 9:27 AM Page 2 (7) SACC-DSI-FSD-4CON-M16-L180 PP - Device connector rear mounting 1027696 https://www.phoenixcontact.com/us/products/1027696 Electrical properties Rated surge voltage 1.5 kV Nominal voltage UN 250 V Nominal current IN 4A Connection data Conductor connection Connection method Wave soldering Contact connection type Socket Tightening torque 3 Nm ... 4 Nm (Installation-side) Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type Push-pull external locking Coding D Environmental and real-life conditions Ambient conditions Degree of protection IP67 IP65/IP67 Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-010 Note Push-pull (type 2) Nov 6, 2024, 9:27 AM Page 3 (7) SACC-DSI-FSD-4CON-M16-L180 PP - Device connector rear mounting 1027696 https://www.phoenixcontact.com/us/products/1027696 Drawings Schematic diagram Pin assignment M12 socket, 4-pos., D-coded, female side Nov 6, 2024, 9:27 AM Page 4 (7) SACC-DSI-FSD-4CON-M16-L180 PP - Device connector rear mounting 1027696 https://www.phoenixcontact.com/us/products/1027696 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1027696  cULus Recognized Approval ID: E221474-20140616 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A - - Nov 6, 2024, 9:27 AM Page 5 (7) SACC-DSI-FSD-4CON-M16-L180 PP - Device connector rear mounting 1027696 https://www.phoenixcontact.com/us/products/1027696 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Nov 6, 2024, 9:27 AM Page 6 (7) SACC-DSI-FSD-4CON-M16-L180 PP - Device connector rear mounting 1027696 https://www.phoenixcontact.com/us/products/1027696 Environmental product compliance EU RoHS Fulfills EU RoHS substance requirements Yes Exemption 6(c) China RoHS Environment friendly use period (EFUP) EFUP-50 An article-related China RoHS declaration table can be found in the download area for the respective article under "Manufacturer declaration". For all articles with EFUP-E, no China RoHS declaration table issued and required. EU REACH SVHC REACH candidate substance (CAS No.) Lead(CAS: 7439-92-1) SCIP 126e5119-3157-421c-9a12-4ed0cb033d9f Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Nov 6, 2024, 9:27 AM Page 7 (7)