1050222

MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Ex i temperature transducer: converts signals from resistance temperature detectors installed in the Ex area and transmits a 0/4 - 20 mA signal to a load in the safe area. Freely programmable. 3-way isolation, SIL, screw connection, standard configuration. Your advantages • Power supply possible via DIN rail connector • Programming during operation with Ex measuring circuit connected and also voltage-free using IFS-USB-PROG-ADAPTER programming adapter • Input for resistance thermometers and resistance-type sensors, [Ex ia] IIC • Installation in zone 2, protection type "ec" (EN 60079-7) permitted • 3-way electrical isolation • Status indicator for supply voltage, cable, sensor, and module errors • Configuration via software (FDT/DTM): sensor type, connection technology, measuring range, measuring unit, filter, alarm signal, and output range • Output: 0 mA ... 20 mA or 4 mA ... 20 mA Commercial data Item number 1050222 Packing unit 1 pc Minimum order quantity 1 pc Sales key C430 Product key CK3121 Catalog page Page 146 (C-5-2019) GTIN 4055626666075 Weight per piece (including packing) 183.9 g Weight per piece (excluding packing) 130 g Customs tariff number 85437090 Country of origin DE Jan 8, 2024, 9:27 AM Page 1 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Technical data Notes Utilization restriction EMC note EMC: class A product, see manufacturer's declaration in the download area Product properties Product type Temperature transmitter Product family MACX Analog Application Temperature No. of channels 1 Type Ex i signal conditioners with SIL functional safety Configuration Software Insulation characteristics: GB Standard Overvoltage category II Pollution degree 2 Electrical properties Alignment span ±5% Alignment zero ±5% No. of channels 1 Electrical isolation 3-way isolation Electrical isolation between input and output yes Step response (0–99%) 1s ≤ 1.7 s Temperature coefficient, typical 0.01 %/K Transmission error, typical 0.1 % (e.g. for Pt 100, 300 K span, 4 ... 20 mA) Electrical isolation Input/output/power supply Rated insulation voltage 300 Vrms Test voltage 2.5 kV AC (50 Hz, 60 s) Insulation Safe isolation in accordance with IEC/EN 61010-1 Electrical isolation Input/output Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11) Electrical isolation Input/power supply Electrical isolation 375 V (Peak value in accordance with IEC/EN 60079-11) Supply Nominal supply voltage 24 V DC Supply voltage range 19.2 V DC ... 30 V DC (24 V DC, -20 % ... +25 %) Power dissipation ≤ 0.76 W Jan 8, 2024, 9:27 AM Page 2 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Power consumption ≤1W Input data Signal Number of inputs 1 Measurement Description of the input Intrinsically safe Sensor types (RTD) that can be used Pt, Ni, Cu sensors: 2, 3, 4-wire Temperature measuring range -200 °C ... 850 °C (Range depending on the sensor type) Linear resistance measuring range 0 Ω ... 50 kΩ Potentiometer resistance range 0 Ω ... 50 kΩ Max. permissible overall conductor resistance 50 Ω (Per cable) Sensor input current 10 µA ... 210 µA (Up to 2x 210 µA with 3-conductor technology) Temperature measuring range ≥ 50 K Output data Signal: Current Number of outputs 1 Configurable/programmable Yes Current output signal 0 mA ... 20 mA 4 mA ... 20 mA (SIL) Max. current output signal ≥ 21 mA Load/output load current output ≤ 600 Ω Output ripple (current) < 15 µAPP < 10 µArms Behavior in the event of a sensor error As per NE 43 or can be freely defined Connection data Connection method Screw connection Stripping length 7 mm Screw thread M3 Conductor cross section rigid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 14 Tightening torque 0.5 Nm ... 0.6 Nm Test socket Max. diameter 2 mm Ex data Ex installation (EPL) Gc Div. 2 Ga Jan 8, 2024, 9:27 AM Page 3 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Ex i circuits (EPL) Da Ma Div. 1 Safety data: Terminals: 4.1, 4.2, 5.1, 5.2 Max. internal capacitance Ci 44 nF Max. output voltage Uo 6V Max. output current Io 16.6 mA (RTD in 4-conductor technology) 13 mA (RTD in 3-conductor technology) 7.1 mA (RTD in 2-conductor technology) 16.6 mA (2x RTD in 2-conductor technology) 13 mA (Potentiometer) Max. output power Po 25.2 mW (Linear) Safety-related maximum voltage Um 253 V AC 125 V DC 30 V DC (Zone 2: 3.1, 3.2) IIA/I (simple circuit): Max. external inductivity Lo / Max. external capacitance Co 850 mH / 1000 µF IIB/IIIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co 460 mH / 1000 µF IIC (simple circuit): Max. external inductivity Lo / Max. external capacitance Co 100 mH / 40 µF IIB/IIA (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co 100 mH / 950 nF, 50 mH / 950 nF, 5 mH / 950 nF, 1 mH / 950 nF IIIC/I (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co 100 mH / 950 nF, 50 mH / 950 nF, 5 mH / 950 nF, 1 mH / 950 nF IIC (mixed circuit): Max. external inductivity Lo / Max. external capacitance Co 100 mH / 555 nF, 50 mH / 555 nF, 5 mH / 555 nF, 1 mH / 555 nF, 10 µH / 555 nF Signaling Status display Green LED (supply voltage) Red LED, flashing 2.4 Hz (cable error, sensor error on input or output, ERR) Red LED, flashing 1.2 Hz (service operation, ERR) Red LED, permanently on (module error, ERR) Dimensions Dimensional drawing Width 12.5 mm Height 112.5 mm Depth 113.7 mm Jan 8, 2024, 9:27 AM Page 4 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Depth NS 35/7,5 114.5 mm (Snapped onto DIN rail NS 35/7,5 in accordance with EN 60715) Material specifications Flammability rating according to UL 94 V0 (Housing) Housing material PA 6.6-FR Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 70 °C (Any mounting position) Ambient temperature (storage/transport) -40 °C ... 80 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Altitude range (≤ 2000 m) Altitude ≤ 2000 m (The technical data refers to altitudes ≤2000 m above mean sea level. For altitudes >2000 m above mean sea level, refer to the data sheet.) Ambient temperature (operation) -40 °C ... 70 °C Test voltage 2.5 kV Rated insulation voltage 300 Vrms (IEC/EN 60079-11) 375 VPP (IEC/EN 60079-11) Altitude range (≤ 3000 m) Height range > 2000 m ... 3000 m Ambient temperature (operation) -40 °C ... 60 °C Test voltage 2.25 kV Safety-related maximum voltage Um 190 V AC 110 V DC Rated insulation voltage 190 Vrms (IEC/EN 60079-11) Altitude range (≤ 4000 m) Height range > 3000 m ... 4000 m Ambient temperature (operation) -40 °C ... 55 °C Test voltage 2 kV Safety-related maximum voltage Um 60 V AC/DC Rated insulation voltage 60 Vrms (IEC/EN 60079-11) Altitude range (≤ 5000 m) Height range > 4000 m ... 5000 m Ambient temperature (operation) -40 °C ... 49 °C Test voltage 1.75 kV Safety-related maximum voltage Um 60 V AC/DC Rated insulation voltage 60 Vrms (IEC/EN 60079-11) Approvals Jan 8, 2024, 9:27 AM Page 5 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 CE Certificate CE-compliant Note and EN 61326 ATEX Identification  I (M1) [Ex ia Ma] I  II (1) G [Ex ia Ga] IIC  II (1) D [Ex ia Da] IIIC  II 3(1) G Ex ec ic [ia Ga] IIC T4 Gc Certificate IBExU19ATEX1006 X UKCA Ex (UKEX) Identification  I (M1) [Ex ia Ma] I  II (1) G [Ex ia Ga] IIC  II (1) D [Ex ia Da] IIIC  II 3 (1) G Ex ec ic [ia Ga] IIC T4 Gc Certificate CML 22UKEX3531X IECEx Identification [Ex ia Ma] I [Ex ia Ga] IIC [Ex ia Da] IIIC Ex ec ic [ia Ga] IIC T4 Gc Certificate IECEx IBE 19.0001 X CCC / China-Ex Identification [Ex ia Ga] IIC [Ex iaD] Ex nA ic [ia Ga] IIC T4 Gc Certificate NEPSI GYJ20.1305X UL, USA/Canada Identification UL 61010 Listed Class I Div 2; IS for Class I, II, III Div 1 Certificate , C.D.-No 83104549 Shipbuilding approval Certificate DNV GL TAA00000AG Safety Integrity Level (SIL, IEC 61508) Identification 2 INMETRO Identification [Ex ia Ma] I [Ex ia Ga] IIC [Ex ia Da] IIIC Ex ec ic [ia Ga] IIC T4 Gc Jan 8, 2024, 9:27 AM Page 6 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Certificate DNV 21.0064 X EAC Ex Identification  [Ex ia Ga] IIC  [Ex ia Da] IIIC Certificate RU C-DE.AB72.B.00093/19 DNV GL data Temperature B Humidity B Vibration A EMC B Enclosure Required protection according to the Rules shall be provided upon installation on board EMC data Noise immunity EN 61000-6-2 Note When being exposed to interference, there may be minimal deviations. Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Electromagnetic HF field Designation Electromagnetic RF field Standards/regulations EN 61000-4-3 Typical deviation from the measuring range final value 1% Fast transients (burst) Designation Fast transients (burst) Standards/regulations EN 61000-4-4 Typical deviation from the measuring range final value 1% Conducted interference Designation Conducted interferences Standards/regulations EN 61000-4-6 Typical deviation from the measuring range final value 1% Standards and regulations Electrical isolation 3-way isolation GB Standard Standards/regulations GB 3626.20 GB 3836.1 GB 3836.4 GB 3836.8 GB 12476.1 GB 12476.4 Jan 8, 2024, 9:27 AM Page 7 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Mounting Mounting type DIN rail mounting Jan 8, 2024, 9:27 AM Page 8 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Drawings Dimensional drawing 116 (SP) 112,5 12,5 7 114,5 99 Jan 8, 2024, 9:27 AM Page 9 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Block diagram OUT IN Sensor / Field PLC / DCS AI RTD2 4.2 4.2  3.2 3.2 µC passive + 3.1 3.1 µC 4.1 4.1 RTD1  5.2 5.2 5.1 5.1 RTD 2-wire RTD 3-wire RTD 4-wire 2xRTD 2-wire Poti  - GND +24V 1.2 1.1 Power GND +24V Zone 0,1,2 Zone 20,21,22 Zone 2 Jan 8, 2024, 9:27 AM Page 10 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1050222  DNV GL  UL Listed  cUL Listed Approval ID: TAA00000AG Approval ID: FILE E 330267 Approval ID: FILE E 330267 Functional Safety Approval ID: SEBS-A.150520/17 V1  EAC Ex  IECEx Approval ID: RU C-DE.AB72.B.00093 Approval ID: IECEx IBE 19.0001X  cUL Listed  UL Listed Approval ID: FILE E 199827 Approval ID: FILE E 199827  ATEX Approval ID: IBExU 19 ATEX 1006 X  IECEx Approval ID: IECEx IBE 19.0001X INMETRO Approval ID: DNV 21.0064 X Jan 8, 2024, 9:27 AM Page 11 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 cULus Listed cULus Listed Jan 8, 2024, 9:27 AM Page 12 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Classifications ECLASS ECLASS-11.0 27210129 ECLASS-12.0 27210129 ECLASS-13.0 27210129 ETIM ETIM 9.0 EC002919 UNSPSC UNSPSC 21.0 41112100 Jan 8, 2024, 9:27 AM Page 13 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:27 AM Page 14 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 Accessories ME 6,2 TBUS-2 1,5/5-ST-3,81 GY - DIN rail bus connectors 2695439 https://www.phoenixcontact.com/us/products/2695439 DIN rail connector (TBUS), 5-pos., for bridging the supply voltage, can be snapped onto NS 35/... DIN rail in accordance with EN 60715 EA-MSTB 2,5/ 5 - Accessories 1831016 https://www.phoenixcontact.com/us/products/1831016 Cover for screw shafts of the MSTB connector ranges with a pitch of 5.0 mm and 5.08 mm. These can be aligned and shortened for use with different numbers of positions. Jan 8, 2024, 9:27 AM Page 15 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 TC-D37SUB-AIO16-EX-PS-UNI - Module carrier 2902932 https://www.phoenixcontact.com/us/products/2902932 Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection), with HART multiplexer connection TC-D37SUB-ADIO16-EX-P-UNI - Module carrier 2924854 https://www.phoenixcontact.com/us/products/2924854 Universal termination carrier for connecting 16 MACX Analog Ex i signal conditioners to digital or analog I/O cards, via D-SUB connector, 37-pos. (1:1 connection) Jan 8, 2024, 9:27 AM Page 16 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 IFS-USB-PROG-ADAPTER - Programming adapter 2811271 https://www.phoenixcontact.com/us/products/2811271 Programming adapter with USB interface, for programming with software. The USB driver is included in the software solutions for the products to be programmed, such as measuring transducers or motor managers. IFS-BT-PROG-ADAPTER - Adapter 2905872 https://www.phoenixcontact.com/us/products/2905872 Bluetooth adapter with micro USB and S-PORT interface for wireless communication with the MINI Analog, MINI Analog Pro, MACX Analog, Interface System Gateways, and PLC logic device series. Jan 8, 2024, 9:27 AM Page 17 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 MPS-IH WH - Insulating sleeve 0201663 https://www.phoenixcontact.com/us/products/0201663 Insulating sleeve, color: white MPS-IH RD - Insulating sleeve 0201676 https://www.phoenixcontact.com/us/products/0201676 Insulating sleeve, color: red Jan 8, 2024, 9:27 AM Page 18 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 MPS-IH BU - Insulating sleeve 0201689 https://www.phoenixcontact.com/us/products/0201689 Insulating sleeve, color: blue MPS-IH YE - Insulating sleeve 0201692 https://www.phoenixcontact.com/us/products/0201692 Insulating sleeve, color: yellow Jan 8, 2024, 9:27 AM Page 19 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 MPS-IH GN - Insulating sleeve 0201702 https://www.phoenixcontact.com/us/products/0201702 Insulating sleeve, color: green MPS-IH GY - Insulating sleeve 0201728 https://www.phoenixcontact.com/us/products/0201728 Insulating sleeve, color: gray Jan 8, 2024, 9:27 AM Page 20 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 MPS-IH BK - Insulating sleeve 0201731 https://www.phoenixcontact.com/us/products/0201731 Insulating sleeve, color: black MPS-MT - Test plug 0201744 https://www.phoenixcontact.com/us/products/0201744 Test plug, with solder connection up to 1 mm2 conductor cross section, number of positions: 1, color: gray Jan 8, 2024, 9:27 AM Page 21 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 UC-EMLP (11X9) - Plastic label 0819291 https://www.phoenixcontact.com/us/products/0819291 Plastic label, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 UC-EMLP (11X9) YE - Plastic label 0822602 https://www.phoenixcontact.com/us/products/0822602 Plastic label, Sheet, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Jan 8, 2024, 9:27 AM Page 22 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 UC-EMLP (11X9) CUS - Plastic label 0824547 https://www.phoenixcontact.com/us/products/0824547 Plastic label, can be ordered: by sheet, white, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm UC-EMLP (11X9) YE CUS - Plastic label 0824548 https://www.phoenixcontact.com/us/products/0824548 Plastic label, can be ordered: by sheet, yellow, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm Jan 8, 2024, 9:27 AM Page 23 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 UC-EMLP (11X9) SR - Plastic label 0828094 https://www.phoenixcontact.com/us/products/0828094 Plastic label, Sheet, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 UC-EMLP (11X9) SR CUS - Plastic label 0828098 https://www.phoenixcontact.com/us/products/0828098 Plastic label, can be ordered: by sheet, silver, labeled according to customer specifications, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 10 Jan 8, 2024, 9:27 AM Page 24 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 US-EMLP (11X9) - Plastic label 0828789 https://www.phoenixcontact.com/us/products/0828789 Plastic label, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 US-EMLP (11X9) YE - Plastic label 0828871 https://www.phoenixcontact.com/us/products/0828871 Plastic label, Card, yellow, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 Jan 8, 2024, 9:27 AM Page 25 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 US-EMLP (11X9) SR - Plastic label 0828872 https://www.phoenixcontact.com/us/products/0828872 Plastic label, Card, silver, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 135 LS-EMLP (11X9) WH - Device marker 0831678 https://www.phoenixcontact.com/us/products/0831678 Device marker, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Jan 8, 2024, 9:27 AM Page 26 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 LS-EMLP (11X9) SR - Device marker 0831705 https://www.phoenixcontact.com/us/products/0831705 Device marker, Sheet, silver, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 LS-EMLP (11X9) YE - Device marker 0831732 https://www.phoenixcontact.com/us/products/0831732 Device marker, Sheet, yellow, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER, mounting type: adhesive, lettering field size: 11 x 9 mm, Number of individual labels: 255 Jan 8, 2024, 9:27 AM Page 27 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 MACX MCR-PTB - Power and error message module 2865625 https://www.phoenixcontact.com/us/products/2865625 Power and fault signaling module with screw connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector MACX MCR-PTB-SP - Power and error message module 2924184 https://www.phoenixcontact.com/us/products/2924184 Power and fault signaling module with Push-in connection, including corresponding ME 17,5 TBUS 1,5/ 5-ST-3,81 GY DIN rail connector Jan 8, 2024, 9:27 AM Page 28 (29) MACX MCR-EX-RTD-I - Temperature measuring transducer 1050222 https://www.phoenixcontact.com/us/products/1050222 QUINT4-SYS-PS/1AC/24DC/2.5/SC - Power supply unit 2904614 https://www.phoenixcontact.com/us/products/2904614 Primary-switched power supply, QUINT POWER, screw connection, DIN rail mounting, supply of devices possible via the TBUS DIN rail connector, protective coating, input: single-phase, output: 24 V DC/2.5 A SZS 0,6X3,5 - Screwdriver 1205053 https://www.phoenixcontact.com/us/products/1205053 Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:27 AM Page 29 (29)