1065727

CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload or short circuit. With status output, reset input, and electronic locking of the set nominal currents. For installation on DIN rails. Your advantages • Easy device replacement without replanning, thanks to compact design and options for individual adjustments • Circuits can be adjusted without any tools by means of one single pushable LED button • Enhanced diagnostic and control options, thanks to integrated status output and reset input • Optimum protection for cables and sensors as well as NEC Class 2 circuits by means of an additional internal output fuse • Reliable protection against unintentional adjustment of current values, thanks to electronic locking • Status LEDs in traffic light colors enable instantaneous determination of operating states Commercial data Item number 1065727 Packing unit 1 pc Minimum order quantity 1 pc Sales key CL14 Product key CLA152 Catalog page Page 374 (C-4-2019) GTIN 4055626728780 Weight per piece (including packing) 140.6 g Weight per piece (excluding packing) 123.61 g Customs tariff number 85362010 Country of origin DE Jan 8, 2024, 9:30 AM Page 1 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Technical data Notes General Note Repeated hard short circuits can reduce the melting integral of the integrated backup fuse. Product properties Type DIN rail module, one-piece  Product type Device circuit breakers Product family CBMC Number of positions 1 No. of channels 4 Insulation characteristics Protection class III Pollution degree 2 Electrical properties No. of channels 4 General Operating voltage 18 V DC ... 30 V DC Rated voltage 24 V DC Rated current IN max. 16 A DC (IN+) max. 40 A DC (per terminal position when bridging additional devices via IN+) Rated current IN 1 / 2 / 3 / 4 A DC (adjustable per output channel) Rated current (pre-adjusted) 4A Rated surge voltage 0.5 kV Tripping method E (electronic) Feedback resistance max. 35 V DC Required backup fuse Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element. Short-circuit switching capacity 300 A Dielectric strength max. 35 V DC (Load circuit) Fuse electronic Efficiency > 99 % Closed circuit current I0 typ. 25 mA Power dissipation typ. 0.6 W (No-load operation) < 4 W (Nominal operation) Module initialization time 1.6 s Waiting time after switch off of a channel 5 s (at overload / short circuit) Measuring tolerance I ± 15 % 11764705 h (at 25 °C with 21 % load) Jan 8, 2024, 9:30 AM Page 2 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 MTBF (IEC 61709, SN 29500) 5319148 h (at 40°C with 34.25% load) 846023 h (at 60°C with 100% load) Fail-safe element 4 A DC (per output channel) Load circuit Shutdown time ≤ 10 ms (for short circuit > 2.0 x IN) 1 s (1.2 ... 2.0 x IN) Undervoltage switch-off ≤ 17.8 V DC (active) ≥ 18.8 V DC (inactive) Overvoltage switch-off ≥ 30.5 V DC (active) ≤ 29.5 V DC (inactive) Max. capacitive load 30000 µF (Depending on the current setting and the short-circuit current available) Reset Input voltage range 7 V DC ... 30 V DC (Reset with falling edge) Current consumption typ. 0.4 mA (at 24 V DC) Pulse length ≥ 50 ms (High) ≥ 50 ms (Low) Voltage < 5 V DC (Low state) > 8 V DC (High state) Stripping length 10 mm Conductor cross section rigid 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² Status output Output voltage 24 V DC Output current max. 0.04 A (Short-circuit-proof) Stripping length 10 mm Conductor cross section rigid 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² Connection data Main circuit IN+ Connection method Push-in connection Stripping length 15 mm Conductor cross section rigid 0.2 mm² ... 10 mm² Conductor cross section AWG 24 ... 8 Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm² Conductor cross section flexible, with ferrule without plastic 0.25 mm² ... 6 mm² Jan 8, 2024, 9:30 AM Page 3 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 sleeve Main circuit INConnection method Push-in connection Stripping length 10 mm Conductor cross section rigid 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² Main circuit OUT+ Connection method Push-in connection Stripping length 10 mm Conductor cross section rigid 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 12 Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 1.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 2.5 mm² Signaling Channel LED off off (Channel switched off) Channel LED yellow lit (Channel switched on, channel load > 80% ) flashing (Programming mode active) Channel LED green lit (Channel switched on) Channel LED red lit (Channel switched off, over- or undervoltage active) ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release) flashing (Channel switched off, ready to be switched back on, overload or short-circuit release) two flashes (Channel switched off, device total current limit 40 A exceeded) Dimensions Dimensional drawing Width 36 mm Height 90 mm Depth 98 mm (incl. DIN rail 7.5 mm) Material specifications Material PC PA 6.6 PA 6.3T POM Flammability rating according to UL 94 V-0 Environmental and real-life conditions Jan 8, 2024, 9:30 AM Page 4 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 70 °C Altitude ≤ 3000 m up to 52 °C (amsl) ≤ 4000 m up to 46 °C (amsl) Humidity test 96 h, 95 % RH, 40 °C Shock (operation) 30g (IEC 60068-2-27, Test Ea) Vibration (operation) 10 Hz ... 57.6 Hz (Amplitude ±0.35 mm; in accordance with IEC 60068-2-6, Test Fc) 57.6 Hz … 150 Hz (Acceleration 5g; in accordance with IEC 60068-2-6, Test Fc) Approvals UL approval Identification UL/C-UL Listed UL 508 UL Recognized UL 2367 NEC Class 2 according to UL 1310 Standards and regulations Standards/specifications EN 61000-6-2 Note EMC – Immunity for industrial areas Standards/specifications EN 61000-6-3 Note EMC – Emission for residential, business and commercial properties and small operations Standards/specifications EN 60068-2-6 Note Environmental influences – Vibrations (sinusoidal) Standards/specifications EN 60068-2-27 Note Environmental influences – Shocks Standards/specifications EN 60068-2-78 Note Environmental influences – Moisture and heat, constant Standards/specifications EN 50178 Note Equipping power installations with electronic equipment Mounting Mounting type DIN rail: 35 mm Jan 8, 2024, 9:30 AM Page 5 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Drawings Product drawing 2 3 4 2 S 1 2 IN- RST 3 CBMC 1 IN+ 4 OUT+ 1 1 2 Jan 8, 2024, 9:30 AM Page 6 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Dimensional drawing 36 1 1 OUT+ 2 3 4 2 S 2 90 1 IN- RST 3 CBMC 1 IN+ 4 98 2 Jan 8, 2024, 9:30 AM Page 7 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Block diagram CH1 IN+ 1 IN+ 2 CH2 CH3 CH4 IN- 1 IN- 2 S R OUT+ OUT+ 1 OUT+ 2 OUT+ 3 OUT+ 4 CH1 µC CH2 CH3 CH4 Jan 8, 2024, 9:30 AM Page 8 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Diagram t s 1000 100 10 1 0,1 0,01 0,5 1 1,2 2 x IN Trigger characteristic in the DC range Jan 8, 2024, 9:30 AM Page 9 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1065727  UL Recognized Approval ID: FILE E 317172  UL Listed  cUL Listed Approval ID: FILE E 123528 Approval ID: FILE E 123528 cULus Listed Jan 8, 2024, 9:30 AM Page 10 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Classifications ECLASS ECLASS-11.0 27140401 ECLASS-12.0 27140401 ECLASS-13.0 27140401 ETIM ETIM 9.0 EC003538 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 9:30 AM Page 11 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Environmental product compliance REACh SVHC Perfluorobutane sulfonic acid (PFBS) and its salts Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:30 AM Page 12 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 Accessories EML (10X7)R - Label 0816663 https://www.phoenixcontact.com/us/products/0816663 Label, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, lettering field size: 10 x 7 mm, Number of individual labels: 10000 EML-ESD (20X7)R - Equipment marking 0830567 https://www.phoenixcontact.com/us/products/0830567 Equipment marking, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, lettering field size: 20 x 7 mm, Number of individual labels: 4000 Jan 8, 2024, 9:30 AM Page 13 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 QUINT4-PS/1AC/24DC/10 - Power supply unit 2904601 https://www.phoenixcontact.com/us/products/2904601 Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/10 A QUINT4-PS/1AC/24DC/20 - Power supply unit 2904602 https://www.phoenixcontact.com/us/products/2904602 Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 1-phase, output: 24 V DC/20 A QUINT4-PS/3AC/24DC/10 - Power supply unit 2904621 https://www.phoenixcontact.com/us/products/2904621 Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/10 A Jan 8, 2024, 9:30 AM Page 14 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 QUINT4-PS/3AC/24DC/20 - Power supply unit 2904622 https://www.phoenixcontact.com/us/products/2904622 Primary-switched QUINT POWER power supply with free choice of output characteristic curve, SFB (selective fuse breaking) technology, and NFC interface, input: 3-phase, output: 24 V DC/20 A TRIO-PS-2G/1AC/24DC/10 - Power supply unit 2903149 https://www.phoenixcontact.com/us/products/2903149 Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: single phase, output: 24 V DC/10 A TRIO-PS-2G/1AC/24DC/20 - Power supply unit 2903151 https://www.phoenixcontact.com/us/products/2903151 Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: singlephase, output: 24 V DC/20 A Jan 8, 2024, 9:30 AM Page 15 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 TRIO-PS-2G/3AC/24DC/5 - Power supply unit 2903153 https://www.phoenixcontact.com/us/products/2903153 Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/5 A TRIO-PS-2G/3AC/24DC/10 - Power supply unit 2903154 https://www.phoenixcontact.com/us/products/2903154 Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/10 A TRIO-PS-2G/3AC/24DC/20 - Power supply unit 2903155 https://www.phoenixcontact.com/us/products/2903155 Primary-switched TRIO POWER power supply with push-in connection for DIN rail mounting, input: 3-phase, output: 24 V DC/20 A Jan 8, 2024, 9:30 AM Page 16 (17) CBMC E4 24DC/1-4A S-R - Electronic circuit breaker 1065727 https://www.phoenixcontact.com/us/products/1065727 TRIO-PS-2G/3AC/24DC/40 - Power supply unit 2903156 https://www.phoenixcontact.com/us/products/2903156 Primary-switched TRIO power supply for DIN rail mounting, input: 3-phase, output: 24 V DC/40 A, dynamic boost, tool-free fast connection technology for solid and stranded conductors with ferrule Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:30 AM Page 17 (17)