1065796

https://www.phoenixcontact.com/us/products/1065796 Device connector, front mounting - PRC FT25-45/90-HSG - 1065796 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Panel feed-through, Range of articles: PRC 35, Device connector, front mounting, housing material: PPE, color: black, nom. voltage: 690 V AC. Connector housing without contact insert. Please order the appropriate contact inserts according to the accessories list Your advantages  Universal accommodation of existing connector heads with screw connection technology  Modular system for optimized storage  Versatile interfaces, thanks to straight and angled connector housings  Ideal for indoor and outdoor use, thanks to the use of weatherproof materials  Versatile interfaces with straight and angled connector housings  Universal accommodation of existing connector heads with screw connection technology  Modular system for optimized storage  Locking mechanism can be unlocked manually or using a tool  Ideal for indoor and outdoor use due to weatherproof materials Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626730301 Weight per Piece (excluding packing) 40.000 g Custom tariff number 85389099 Country of origin Poland Technical data General data Color black 06/19/2021   Page 1 / 5 https://www.phoenixcontact.com/us/products/1065796 Device connector, front mounting - PRC FT25-45/90-HSG - 1065796 Technical data General data Width 37.6 mm Height 37.6 mm Length 74.8 mm Connection data Nominal voltage ATD 690 V AC (in accordance with IEC 61984) 600 V AC (In accordance with UL 2238) Rated voltage (III/2) 690 V Degree of protection IP66 / IP68 (2m / 24h) / IP69K Material data Housing material PPE Seal material Silicon O-ring material EPDM Cable gland material PPE Color of the housing part black Ambient conditions Ambient temperature (operation) -40 °C ... 105 °C (dependent on the derating curve) Ambient temperature (storage/transport) -40 °C ... 70 °C Standards and Regulations Halogen-free yes Flammability rating according to UL 94 V0 Safety note • WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible. • WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product. WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property. • Assembled products may not be manipulated or improperly opened. • Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products). • When using the product in direct connection with third-party manufacturers, the user is responsible. • For operating voltages > 50 V AC, conductive connector housings must be grounded 06/19/2021   Page 2 / 5 https://www.phoenixcontact.com/us/products/1065796 Device connector, front mounting - PRC FT25-45/90-HSG - 1065796 Technical data Standards and Regulations • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product • Only use tools recommended by Phoenix Contact • The installation notes/Design In documents online on the download page at phoenixcontact.com/products must be observed for this product. • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products • Operate the connector only when it is fully plugged in. • Operate the connector only when it is fully plugged in and interlocked. • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the minimum bending radius of the cable. Lay the cable without twisting it. • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Classifications eCl@ss eCl@ss 10.0.1 27440109 eCl@ss 11.0 27440109 eCl@ss 9.0 27440103 ETIM ETIM 6.0 EC002061 Approvals Approvals 06/19/2021   Page 3 / 5 https://www.phoenixcontact.com/us/products/1065796 Device connector, front mounting - PRC FT25-45/90-HSG - 1065796 Approvals Approvals EAC Ex Approvals Approval details EAC      B.01687 Accessories Accessories Installation connector Contact insert - PRC 5-HEAD-FS6-1 - 1070197 Contact insert, Range of articles: PRC 35, Contact insert, type: Release with tool or by hand (see accessories), housing material: PPE, color: black, number of positions: 5, min. conductor cross section: 1.5 mm², max. conductor cross section: 6 mm², nom. voltage: 690 V AC, rated current: 35 A, Connection method: Screw connection, Type of contact: Socket. Contact insert without connector housing. Please order the appropriate connector housings according to the accessories list.     Contact insert - PRC 3-HEAD-FS6-1 - 1070198 Contact insert, Range of articles: PRC 35, Contact insert, type: Release with tool or by hand (see accessories), housing material: PPE, color: black, number of positions: 3, min. conductor cross section: 1.5 mm², max. conductor cross section: 6 mm², nom. voltage: 690 V AC, rated current: 35 A, Connection method: Screw connection, Type of contact: Socket. Contact insert without connector housing. Please order the appropriate connector housings according to the accessories list.     Contact insert - PRC 5-HEAD-MS6-2 - 1070199 Contact insert, Range of articles: PRC 35, Contact insert, housing material: PPE, color: black, number of positions: 5, min. conductor cross section: 1.5 mm², max. conductor cross section: 6 mm², nom. voltage: 690 V AC, rated current: 35 A, Connection method: Screw connection, Type of contact: Pin. Contact insert without connector housing. Please order the appropriate connector housings according to the accessories list.     06/19/2021   Page 4 / 5 https://www.phoenixcontact.com/us/products/1065796 Device connector, front mounting - PRC FT25-45/90-HSG - 1065796 Accessories Contact insert - PRC 3-HEAD-MS6-2 - 1070200 Contact insert, Range of articles: PRC 35, Contact insert, housing material: PPE, color: black, number of positions: 3, min. conductor cross section: 1.5 mm², max. conductor cross section: 6 mm², nom. voltage: 690 V AC, rated current: 35 A, Connection method: Screw connection, Type of contact: Pin. Contact insert without connector housing. Please order the appropriate connector housings according to the accessories list.     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 06/19/2021   Page 5 / 5