1066287

SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector, rear mounting, Universal, 12-position, Pin, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, M16 x 1.5, Individual wires, cable length: 1 m, 0.14 mm2, TPE litz wire, Alternative product in accordance with RoHS II without Exemption 6c (Pb  IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. General Lock nut is included in the scope of delivery General Contact connection method: Crimp connection Mounting Mounting type Rear mounting M16 x 1.5 With flat nut Assembly instructions With flat nut Connection method Individual wires Product properties Product type Circular connectors (device side) Sensor type Universal Number of positions 12 No. of cable outlets 1 Shielded no Coding A Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Material specifications Flammability rating according to UL 94 V0 Seal material FKM Contact material CuZn Contact surface material Au Contact carrier material PA 6.6 Material for screw connection Zinc die-cast, nickel-plated Conductor material Tin-plated Cu litz wires Electrical properties Rated surge voltage 0.8 kV Contact resistance ≤ 3 mΩ Insulation resistance ≥ 100 MΩ Nominal voltage UN 30 V Jan 8, 2024, 9:27 AM Page 2 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Nominal current IN 1.5 A Max. conductor resistance 57.6 mΩ/m Connection data Conductor connection Connection method Individual wires Contact connection type Pin Conductor cross section 0.14 mm² Tightening torque 3 Nm 4 Nm Mechanical properties Mechanical data Insertion/withdrawal cycles > 100 Connector Connection 1 Head design Pin Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding A Connection 2 Head design free cable end Cable/line Cable length 1m Cable type TPE litz wire Signal type/category Universal Wire diameter incl. insulation 1.1 mm ±0.05 mm Single wire, color brown, blue, white, green, pink, yellow, black, gray, red, violet, gray/pink, red/blue Cable cross section 0.14 mm² Conductor material Tin-plated Cu litz wires Conductor structure signal line 7x 0.16 mm AWG signal line 26 Material wire insulation TPE Thickness, insulation 0.21 mm (Core insulation) Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Cable resistance ≤ 57.6 mΩ/m Jan 8, 2024, 9:27 AM Page 3 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Cable insulation resistance ≥ 20 MΩ*km Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (Cable, flexible installation) Environmental and real-life conditions Ambient conditions Degree of protection IP67 (When plugged in) IP65 (When plugged in) IP65/IP67 Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) -25 °C ... 85 °C (Cable, flexible installation) -40 °C ... 85 °C (cable, fixed installation) Standards and regulations M12 Standard designation M12 connector Standards/specifications IEC 61076-2-101 Jan 8, 2024, 9:27 AM Page 4 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Drawings Circuit diagram 1 2 3 4 5 6 7 8 9 10 11 12 BN BU WH GN PK YE BK GY RD VT GYPK RDBU Dimensional drawing 11 M16x1,5 10 M12x1 2 18 17 500 23 ≤4,5 Dimensional drawing Jan 8, 2024, 9:27 AM Page 5 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Schematic diagram 2 11 3 4 10 1 5 6 7 8 9 12 Pin assignment M12 male connector, 12-pos., male side view Jan 8, 2024, 9:27 AM Page 6 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1066287   UL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 30 V 1.5 A - 26 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 30 V 1.5 A - 26 - cULus Recognized Approval ID: E221474-20140616 Jan 8, 2024, 9:27 AM Page 7 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 9:27 AM Page 8 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:27 AM Page 9 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 Accessories PROT-M12 FS - Sealing cap 1560251 https://www.phoenixcontact.com/us/products/1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flushtype plugs and I/O devices in the field PROT-M12 FS-M - Sealing cap 1430488 https://www.phoenixcontact.com/us/products/1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field Jan 8, 2024, 9:27 AM Page 10 (11) SACC-DSI-M12MS-12CON-M16/1,0 - Device connector, rear mounting 1066287 https://www.phoenixcontact.com/us/products/1066287 SACC-M16-SEAL CLM - Flat gasket 1430394 https://www.phoenixcontact.com/us/products/1430394 M16 flat gasket for M12 flush-type connectors with M16 fastening thread Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:27 AM Page 11 (11)