PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
PLC-INTERFACE for high inrush currents, consisting of PLC-BSC.../1 IC/ACT basic terminal
block with screw connection and pluggable miniature relay, for mounting on DIN rail NS 35/7.5,
max. inrush current up to 800 A, 1 N/O contact, 24 V DC input voltage
Product description
The relay module is particularly suitable for switching strong capacitive loads, such as LED lights. The ballasts installed in the LED lights often have
extremely high switch-on peaks which cause standard relay contacts to fuse. The leading tungsten pre-contact ensures that switch-on currents of
up to 800 A can be switched safely.
Your advantages
• Direct connection of load return line thanks to actuator version
• Efficient connection to system cabling using V8 adapter
• Safe isolation between coil and contact side
• Max. inrush current of 800 A
• Functional plug-in bridges
Commercial data
Item number
1078680
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
C461
Product key
CK621A
Catalog page
Page 383 (C-5-2019)
GTIN
4055626794600
Weight per piece (including packing)
77.24 g
Weight per piece (excluding packing)
44.1 g
Customs tariff number
85364190
Country of origin
DE
Jan 8, 2024, 9:30 AM
Page 1 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Technical data
Notes
General
Separating plate PLC-ATP must be installed for voltages larger
than 250 V (L1, L2, L3) between identical terminal blocks in
adjacent modules. Potential bridging is then carried out with
FBST 8-PLC... or FBST 500....
General
The PLC-ATP separating plate should be installed for safe
isolation between adjacent modules
General
The PLC-ATP separating plate is required at the start and end of
every PLC terminal strip.
General
The system installer must ensure the touch protection of the
product (at voltages > 25 V AC/60 V DC). The product is a builtin device without protection against direct contact.
Product properties
Product type
Relay Module
Product family
PLC-INTERFACE
Application
high inrush currents
Operating mode
100% operating factor
Mechanical service life
3x 107 cycles
Insulation characteristics
Insulation
Safe isolation, reinforced insulation
Insulation characteristics: Standards/regulations
Insulation
Safe isolation, reinforced insulation
Overvoltage category
III
Pollution degree
3
Electrical properties
Maximum power dissipation for nominal condition
0.43 W
Test voltage (Winding/contact)
4 kV AC (50 Hz, 1 min., winding/contact)
Standards/regulations
Rated insulation voltage
250 V AC
Rated surge voltage
6 kV
Input data
Coil side
Nominal input voltage UN
24 V DC
Input voltage range
20.2 V DC ... 33.6 V DC (20 °C)
Drive and function
monostable
Drive (polarity)
polarized
Typical input current at UN
18 mA
Typical response time
8 ms
Jan 8, 2024, 9:30 AM
Page 2 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Typical release time
10 ms
Coil voltage
24 V DC
Protective circuit
Reverse polarity protection; Polarity protection diode
Freewheeling diode; Freewheeling diode
Operating voltage display
Yellow LED
Output data
Switching
Contact switching type
1 N/O contact
Type of switch contact
Single contact
Note regarding the switch contact
With tungsten leading contact
Contact material
AgSnO
Note
Main contact silver tin oxide (AgSnO2): lead contact tungsten
Maximum switching voltage
250 V AC/DC
Minimum switching voltage
12 V (100 mA)
Limiting continuous current
6A
10 A (the value is permissible if both connections 13, both
connections 14 and both connections BB are bridged)
Maximum inrush current
165 A (20 ms)
800 A (200 µs)
Min. switching current
100 mA (12 V)
Interrupting rating (ohmic load) max.
144 W (at 24 V DC)
58 W (at 48 V DC)
48 W (at 60 V DC)
50 W (at 110 V DC)
80 W (at 220 V DC)
1500 VA (for 250 V AC)
Interrupting rating (ohmic load) max. bridged
240 W (for 24 V DC. The value is permissible if both connections
13, both connections 14 and both connections BB are bridged.)
2500 VA (for 250 V AC. The value is permissible if both
connections 13, both connections 14 and both connections BB
are bridged.)
Switching capacity min.
1200 mW
Switching capacity
2 A (at 24 V, DC13)
0.2 A (at 110 V, DC13)
0.2 A (at 250 V, DC13)
6 A (at 24 V, AC15)
6 A (at 120 V, AC15)
6 A (at 250 V, AC15)
Connection data
Connection method
Screw connection
Stripping length
8 mm
Screw thread
M3
Conductor cross section rigid
0.14 mm² ... 2.5 mm²
Jan 8, 2024, 9:30 AM
Page 3 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Conductor cross section flexible
0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1.5 mm² (TWIN ferrule)
Conductor cross section AWG
26 ... 14
Tightening torque
0.6 Nm ... 0.8 Nm
Dimensions
Width
14 mm
Height
80 mm
Depth
94 mm
Material specifications
Flammability rating according to UL 94
V0 (Housing)
Environmental and real-life conditions
Ambient conditions
Degree of protection (Relay)
RT II (Relay)
Degree of protection (Relay base)
IP20 (Relay base)
Degree of protection (Installation location)
≥ IP54 (Installation location)
Ambient temperature (operation)
-40 °C ... 60 °C
Ambient temperature (storage/transport)
-40 °C ... 85 °C
Altitude
≤ 2000 m
Approvals
CE
Certificate
CE-compliant
UKCA
Certificate
UKCA-compliant
Shipbuilding approval
Certificate
TAE0000196
Corrosive gas test
Identification
ISA-S71.04. G3 Harsh Group
EN 60068-2-60
DNV GL data
Temperature
D
Humidity
A
Vibration
B/C
EMC
B
Enclosure
Required protection according to the Rules shall be provided
upon installation on board
EMC data
Jan 8, 2024, 9:30 AM
Page 4 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Low Voltage Directive
Conformance with Low Voltage Directive
Electromagnetic compatibility
Conformance with EMC directive
Standards and regulations
Standards/regulations
Standards/regulations
IEC 60947-5-1
Mounting
Mounting type
DIN rail mounting
Assembly instructions
in rows with zero spacing
Mounting position
any
Jan 8, 2024, 9:30 AM
Page 5 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Drawings
Diagram
U
UN 1,4
A
1,3
1,2
1,1
1
0,9
B
0,8
0,7
20
25
30
35
40
45
50
55
60
65
TU [°C]
Curve A
Maximum permissible continuous voltage Umax with limiting continuous current on the contact side (see relevant technical data)
Curve B
Minimum permissible operate voltage Uop after pre-excitation (see relevant technical data)
Jan 8, 2024, 9:30 AM
Page 6 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
HR [%]
Diagram
100
80
60
40
20
0
-40
A
-20
B
0
20
40
60
80
100
[°C]
Permissible humidity for operation and storage.
The maximum permissible ambient temperature as specified in the data sheet must be observed.
Area A: Ice buildup at ambient temperatures ≤ 0°C must be prevented
Area B: Condensation at ambient temperatures > 0°C must be prevented
On 30 full days that are naturally distributed across an entire year, a humidity level of 95% is permissible at an ambient temperature ≤ 25°C.
Circuit diagram
13
A2
A1
BB
14
Jan 8, 2024, 9:30 AM
Page 7 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Diagram
Switching current [A]
20
10
6
4
2
1
0,5
0,3
0,2
0,1
10
20
30
AC, ohmic load
DC, ohmic load
DC, L/R = 40 ms
50 70 100
200
Switching voltage [V]
300
Interrupting rating
Diagram
U
I
t
Basic behavior of capacitive loads:
- Very high inrush current
- Voltage increases with an e-function
Jan 8, 2024, 9:30 AM
Page 8 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1078680
cUL Recognized
UL Recognized
Approval ID: FILE E 238705
Approval ID: FILE E 238705
EAC
DNV GL
UL Listed
cUL Listed
Approval ID: TR_TS_D_00573_c
Approval ID: TAE0000196
Approval ID: FILE E 172140
Approval ID: FILE E 172140
cULus Listed
Approval ID: E140324
cULus Recognized
cULus Listed
Jan 8, 2024, 9:30 AM
Page 9 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Classifications
ECLASS
ECLASS-11.0
27371601
ECLASS-12.0
27371601
ECLASS-13.0
27371601
ETIM
ETIM 9.0
EC001437
UNSPSC
UNSPSC 21.0
39122300
Jan 8, 2024, 9:30 AM
Page 10 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Environmental product compliance
REACh SVHC
Lead 7439-92-1
Hexahydromethylphthalic anhydride
China RoHS
Environmentally Friendly Use Period = 50 years
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Jan 8, 2024, 9:30 AM
Page 11 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
Accessories
Note: Applying some accessories below might limit this product.
FBST 500-PLC RD - Continuous plug-in bridge
2966786
https://www.phoenixcontact.com/us/products/2966786
Continuous plug-in bridge, length: 500 mm, color: red
Max. current carrying capacity: 32 A
FBST 500-PLC BU - Continuous plug-in bridge
2966692
https://www.phoenixcontact.com/us/products/2966692
Continuous plug-in bridge, length: 500 mm, color: blue
Max. current carrying capacity: 32 A
Jan 8, 2024, 9:30 AM
Page 12 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
FBST 500-PLC GY - Continuous plug-in bridge
2966838
https://www.phoenixcontact.com/us/products/2966838
Continuous plug-in bridge, length: 500 mm, color: gray
Max. current carrying capacity: 32 A
FBST 6-PLC RD - Single plug-in bridge
2966236
https://www.phoenixcontact.com/us/products/2966236
Single plug-in bridge, number of positions: 2, length: 6 mm, color: red
Max. current carrying capacity: 6 A
Jan 8, 2024, 9:30 AM
Page 13 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
FBST 6-PLC BU - Single plug-in bridge
2966812
https://www.phoenixcontact.com/us/products/2966812
Single plug-in bridge, number of positions: 2, length: 6 mm, color: blue
Max. current carrying capacity: 6 A
FBST 6-PLC GY - Single plug-in bridge
2966825
https://www.phoenixcontact.com/us/products/2966825
Single plug-in bridge, number of positions: 2, length: 6 mm, color: gray
Max. current carrying capacity: 6 A
Jan 8, 2024, 9:30 AM
Page 14 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
FBST 8-PLC GY - Single plug-in bridge
2967688
https://www.phoenixcontact.com/us/products/2967688
Single plug-in bridge, number of positions: 2, length: 8 mm, color: gray
Max. current carrying capacity: 6 A
FBST 14-PLC BK - Single plug-in bridge
2967691
https://www.phoenixcontact.com/us/products/2967691
Single plug-in bridge, number of positions: 2, length: 14 mm, color: black
Max. current carrying capacity: 10 A
Jan 8, 2024, 9:30 AM
Page 15 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
PLC-V8L/FLK14/OUT - System connection
2299660
https://www.phoenixcontact.com/us/products/2299660
V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of
output cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plugin connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection
3: Screw connection 1x 2-position, number of channels: 8, control logic:
plusschaltend
PLC-V8L/FLK14/OUT/M - System connection
2304306
https://www.phoenixcontact.com/us/products/2304306
V8 adapter for 8 x PLC-INTERFACE (14 mm), controller: PLC system cabling of
output cards, connection 1: IDC/FLK pin strip 1x 14-position, connection 2: Plugin connection (Can be snapped onto 8x PLC-INTERFACE terminals), connection
3: Screw connection 1x 2-position, number of channels: 8, control logic:
minusschaltend
Jan 8, 2024, 9:30 AM
Page 16 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
ZB 10:UNBEDRUCKT - Zack marker strip
1053001
https://www.phoenixcontact.com/us/products/1053001
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 10.2 mm,
lettering field size: 10.5 x 10.15 mm, Number of individual labels: 10
ZB 10 CUS - Zack marker strip
0824941
https://www.phoenixcontact.com/us/products/0824941
Zack marker strip, can be ordered: Strip, white, labeled according to customer
specifications, mounting type: snap into tall marker groove, for terminal block
width: 10.2 mm, lettering field size: 10,15 x 10,5 mm, Number of individual
labels: 10
Jan 8, 2024, 9:30 AM
Page 17 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
ZB10,LGS:FORTL.ZAHLEN - Zack marker strip
1053014
https://www.phoenixcontact.com/us/products/1053014
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER,
printed horizontally: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100,
mounting type: snapped, for terminal block width: 10.2 mm, lettering field size:
10,15 x 10,5 mm, Number of individual labels: 10
ZB10,QR:FORTL.ZAHLEN - Zack marker strip
1053027
https://www.phoenixcontact.com/us/products/1053027
Zack marker strip, Strip, white, labeled, can be labeled with: CMS-P1-PLOTTER,
Printed vertically: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... 100,
mounting type: snapped, for terminal block width: 10.2 mm, lettering field size:
10,15 x 10,5 mm, Number of individual labels: 10
Jan 8, 2024, 9:30 AM
Page 18 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
ZB10,LGS:L1-N,PE - Marker for terminal blocks
1053412
https://www.phoenixcontact.com/us/products/1053412
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1PLOTTER, horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, mounting type:
snapped, for terminal block width: 10.2 mm, lettering field size: 10,15 x 10,5 mm,
Number of individual labels: 10
ZB10,LGS:U-N - Marker for terminal blocks
1053438
https://www.phoenixcontact.com/us/products/1053438
Marker for terminal blocks, Strip, white, labeled, can be labeled with: CMS-P1PLOTTER, horizontal: U, V, W, N, GND, U, V, W, N, GND, mounting type:
snapped, for terminal block width: 10.2 mm, lettering field size: 10,15 x 10,5 mm,
Number of individual labels: 10
Jan 8, 2024, 9:30 AM
Page 19 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
UC-TM 10 - Marker for terminal blocks
0818069
https://www.phoenixcontact.com/us/products/0818069
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 10.2 mm,
lettering field size: 9.6 x 10.5 mm, Number of individual labels: 48
UC-TM 10 CUS - Marker for terminal blocks
0824605
https://www.phoenixcontact.com/us/products/0824605
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to
customer specifications, mounting type: snap into tall marker groove, for terminal
block width: 10.2 mm, lettering field size: 9.6 x 10.5 mm, Number of individual
labels: 48
Jan 8, 2024, 9:30 AM
Page 20 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
UCT-TM 10 - Marker for terminal blocks
0829142
https://www.phoenixcontact.com/us/products/0829142
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped, for terminal block width: 10.2
mm, lettering field size: 8.9 x 9.6 mm, Number of individual labels: 36
UCT-TM 10 CUS - Marker for terminal blocks
0829623
https://www.phoenixcontact.com/us/products/0829623
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to
customer specifications, mounting type: snap into tall marker groove, for terminal
block width: 10.2 mm, lettering field size: 8.9 x 9.6 mm, Number of individual
labels: 36
Jan 8, 2024, 9:30 AM
Page 21 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
ZB 12:UNPRINTED - Zack marker strip
0812120
https://www.phoenixcontact.com/us/products/0812120
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 12.2 mm,
lettering field size: 12 х 10.5 mm, Number of individual labels: 5
ZB 12 CUS - Zack marker strip
0824942
https://www.phoenixcontact.com/us/products/0824942
Zack marker strip, can be ordered: Strip, white, labeled according to customer
specifications, mounting type: snap into tall marker groove, for terminal block
width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual
labels: 5
Jan 8, 2024, 9:30 AM
Page 22 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
ZB 12,LGS:L1-N,PE - Zack marker strip
0812146
https://www.phoenixcontact.com/us/products/0812146
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE,
mounting type: snapped, for terminal block width: 12.2 mm, lettering field size:
10.5 x 12.15 mm, Number of individual labels: 5
UC-TM 12 - Marker for terminal blocks
0819194
https://www.phoenixcontact.com/us/products/0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK,
CMS-P1-PLOTTER, mounting type: snapped, for terminal block width: 12 mm,
lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40
Jan 8, 2024, 9:30 AM
Page 23 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
UC-TM 12 CUS - Marker for terminal blocks
0824613
https://www.phoenixcontact.com/us/products/0824613
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to
customer specifications, mounting type: snap into tall marker groove, for terminal
block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual
labels: 40
UCT-TM 12 - Marker for terminal blocks
0829144
https://www.phoenixcontact.com/us/products/0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with:
TOPMARK NEO, TOPMARK LASER, BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snapped, for terminal block width: 12
mm, lettering field size: 10.8 x 9.6 mm, Number of individual labels: 30
Jan 8, 2024, 9:30 AM
Page 24 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
UCT-TM 12 CUS - Marker for terminal blocks
0829630
https://www.phoenixcontact.com/us/products/0829630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to
customer specifications, mounting type: snap into tall marker groove, for terminal
block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of individual
labels: 30
NS 35/ 7,5 PERF 2000MM - DIN rail perforated
0801733
https://www.phoenixcontact.com/us/products/0801733
DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, Standard profile, color: silver
Jan 8, 2024, 9:30 AM
Page 25 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/ 7,5 UNPERF 2000MM - DIN rail, unperforated
0801681
https://www.phoenixcontact.com/us/products/0801681
DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, Standard profile, color: silver
NS 35/ 7,5 WH PERF 2000MM - DIN rail perforated
1204119
https://www.phoenixcontact.com/us/products/1204119
DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel,
Galvanized, white passivated, Standard profile, color: silver
Jan 8, 2024, 9:30 AM
Page 26 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/ 7,5 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated
1204122
https://www.phoenixcontact.com/us/products/1204122
DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel,
Galvanized, white passivated, Standard profile, color: silver
NS 35/ 7,5 AL UNPERF 2000MM - DIN rail, unperforated
0801704
https://www.phoenixcontact.com/us/products/0801704
DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Aluminum,
uncoated, Standard profile, color: silver
Jan 8, 2024, 9:30 AM
Page 27 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/ 7,5 ZN PERF 2000MM - DIN rail perforated
1206421
https://www.phoenixcontact.com/us/products/1206421
DIN rail perforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel,
galvanized, Standard profile, color: silver
NS 35/ 7,5 ZN UNPERF 2000MM - DIN rail, unperforated
1206434
https://www.phoenixcontact.com/us/products/1206434
DIN rail, unperforated, Pack of 25 (50 m), acc. to EN 60715, material: Steel,
galvanized, Standard profile, color: silver
Jan 8, 2024, 9:30 AM
Page 28 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/ 7,5 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated
0801762
https://www.phoenixcontact.com/us/products/0801762
DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Copper,
uncoated, Standard profile, color: copper-colored
NS 35/ 7,5 CAP - End cap
1206560
https://www.phoenixcontact.com/us/products/1206560
DIN rail end piece, for DIN rail NS 35/7.5
Jan 8, 2024, 9:30 AM
Page 29 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/15 PERF 2000MM - DIN rail perforated
1201730
https://www.phoenixcontact.com/us/products/1201730
DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, Standard profile, color: silver
NS 35/15 UNPERF 2000MM - DIN rail, unperforated
1201714
https://www.phoenixcontact.com/us/products/1201714
DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel,
galvanized, passivated with a thick layer, Standard profile, color: silver
Jan 8, 2024, 9:30 AM
Page 30 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/15 WH PERF 2000MM - DIN rail perforated
0806602
https://www.phoenixcontact.com/us/products/0806602
DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel,
Galvanized, white passivated, Standard profile, color: white
NS 35/15 WH UNPERF 2000MM-VPE 10 - DIN rail, unperforated
1204135
https://www.phoenixcontact.com/us/products/1204135
DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Steel,
Galvanized, white passivated, Standard profile, color: silver
Jan 8, 2024, 9:30 AM
Page 31 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/15 AL UNPERF 2000MM - DIN rail, unperforated
1201756
https://www.phoenixcontact.com/us/products/1201756
DIN rail, unperforated, similar to EN 60715, material: Aluminum, uncoated,
Standard profile, color: silver
NS 35/15 ZN PERF 2000MM - DIN rail perforated
1206599
https://www.phoenixcontact.com/us/products/1206599
DIN rail perforated, Pack of 25 (50 m), similar to EN 60715, material: Steel,
galvanized, Standard profile, color: silver
Jan 8, 2024, 9:30 AM
Page 32 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/15 ZN UNPERF 2000MM - DIN rail, unperforated
1206586
https://www.phoenixcontact.com/us/products/1206586
DIN rail, unperforated, Pack of 25 (50 m), similar to EN 60715, material: Steel,
galvanized, Standard profile, color: silver
NS 35/15 CU UNPERF 2000MM-VPE 10 - DIN rail, unperforated
1201895
https://www.phoenixcontact.com/us/products/1201895
DIN rail, unperforated, Pack of 10 (20 m), similar to EN 60715, material: Copper,
uncoated, Standard profile, color: copper-colored
Jan 8, 2024, 9:30 AM
Page 33 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
NS 35/15 CAP - End cap
1206573
https://www.phoenixcontact.com/us/products/1206573
DIN rail end piece, for DIN rail NS 35/15
NS 35/15-2,3 UNPERF 2000MM-VPE 10 - DIN rail, unperforated
1201798
https://www.phoenixcontact.com/us/products/1201798
DIN rail, unperforated, Pack of 10 (20 m), acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, Standard profile 2.3 mm, color: silver
Jan 8, 2024, 9:30 AM
Page 34 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
PLC-ATP BK - Separating plate
2966841
https://www.phoenixcontact.com/us/products/2966841
Separating plate, 2 mm thick, required at the start and end of a PLC terminal
strip. Furthermore, it is used for: visual separation of groups, safe isolation of
different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101,
isolation
PLC-ESK GY - Power terminal block
2966508
https://www.phoenixcontact.com/us/products/2966508
Power terminal block, for the input of up to four potentials, for mounting on NS
35/7.5
Jan 8, 2024, 9:30 AM
Page 35 (36)
PLC-RSC- 24DC/ 1ICT/ACT - Relay Module
1078680
https://www.phoenixcontact.com/us/products/1078680
SZF 1-0,6X3,5 - Screwdriver
1204517
https://www.phoenixcontact.com/us/products/1204517
Actuation tool, for ST terminal blocks, also suitable for use as a bladed
screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip
REL-MR- 24DC/ 1ICT - Single relay
2987338
https://www.phoenixcontact.com/us/products/2987338
Pluggable miniature power relay, with tungsten pre-contact for high switch-on
currents up to 800 A peaks, 1 N/O contact, input voltage: 24 V DC
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 9:30 AM
Page 36 (36)