1085163

https://www.phoenixcontact.com/us/products/1085163 Industrial Ethernet Switch - FL SWITCH 1105NT - 1085163 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Narrow Ethernet switch, wide temperature range, five RJ45 ports with 10/100/1000 Mbps on all ports, automatic data transmission speed detection, autocrossing function, and QoS Your advantages  Auto negotiation and autocrossing detection simplifies installation and setup  Local diagnostic indicators with LEDs  RJ45 ports support a transmission speed of 10/100/1000 Mbps  QoS-prioritized (Quality of Service) messages  PROFINET Conformance Class A for real-time data exchange  Energy-efficient Ethernet in accord. with IEEE 802.3az  PROFINET PTCP filter for reliable communication on PROFINET networks  Enhanced traffic prioritization for automation protocols  Jumbo frame support (frame size up to 9216 bytes/frame) Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 300.000 g Country of origin Taiwan Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 22.5 mm Height 117 mm Depth 84 mm 03/18/2022   Page 1 / 7 https://www.phoenixcontact.com/us/products/1085163 Industrial Ethernet Switch - FL SWITCH 1105NT - 1085163 Technical data Ambient conditions Degree of protection IP30 Ambient temperature (operation) -40 °C ... 75 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 5 % ... 95 % (non-condensing) Permissible humidity (storage/transport) 5 % ... 95 % (non-condensing) Air pressure (operation) 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) Air pressure (storage/transport) 79 kPa ... 108 kPa up to 2000 m above mean sea level (Without derating) Interfaces Interface Ethernet (RJ45) No. of ports 5 (RJ45 ports) Note on the connection method Auto negotiation and autocrossing Transmission physics Ethernet in RJ45 twisted pair Transmission speed 10/100/1000 Mbps Transmission length 100 m (per segment) Signal LEDs Data receive, link status Function Basic functions Unmanaged switch Autonegotiation Store and Forward switching mode Additional functions 100 BASE-TX/100BASE-FX (IEEE 802.3u) Jumbo frames (Max. 9,216 bytes) Quality of Service (QoS) prioritization (IEEE 802.1p) Energy-efficient Ethernet (IEEE 802.3az) Gigabit Ethernet 1000BASE-T (IEEE 802.3ab) 10Base-T (IEEE 802.3) MAC address table 4k PROFINET conformance class Conformance-Class A Status and diagnostic indicators LEDs: US, link and activity per port Network expansion parameters Cascading depth Network, linear, and star structure: any Maximum conductor length (twisted pair) 100 m Supply voltage Supply voltage 24 V 24 V AC (50/60 Hz) Residual ripple 3.6 VPP (within the permitted voltage range) 03/18/2022   Page 2 / 7 https://www.phoenixcontact.com/us/products/1085163 Industrial Ethernet Switch - FL SWITCH 1105NT - 1085163 Technical data Supply voltage Supply voltage range 9 V DC ... 32 V DC 18 V AC ... 30 V AC (50/60 Hz) Typical current consumption 34 mA Max. current consumption 98 mA General Mounting type DIN rail Net weight 222 g Housing material Polycarbonate fiber reinforced Aluminum / steel sheet DC01 MTTF 97.6 Years (MIL-HDBK-217F standard, temperature 25°C, operating cycle 100%) 888.3 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) 818.3 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) Connection data Connection method Push-in spring connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 10 mm Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Interference emission EN 61000-6-2 EN 61000-4-8 (electromagnetic fields) Criterion A Conducted noise emission EN 61000-6-2 Class A Immunity to surge EN 61000-6-2 EN 61000-4-5 (surge) Criterion B Immunity to burst EN 61000-6-2 EN 61000-4-4 (EFT burst) Criterion A Immunity to EF EN 61000-6-2 EN 61000-4-3 (electromagnetic fields) Criterion A Immunity to ESD EN 61000-6-2 EN 61000-4-2 (ESD) Criterion B Immunity to conducted interference EN 61000-6-2 EN 61000-4-6 (line noise immunity) Criterion A Type of test Free fall in accordance with EN 61131-2 Noise emission EN 61000-6-4:2007 + A1:2011 Noise immunity EN 61000-6-2:2005 Vibration (storage/transport) 5g, 150 Hz, in acc. with IEC 60068-2-6 Vibration (operation) in acc. with IEC 60068-2-6: 5g, 150 Hz 03/18/2022   Page 3 / 7 https://www.phoenixcontact.com/us/products/1085163 Industrial Ethernet Switch - FL SWITCH 1105NT - 1085163 Technical data Standards and Regulations Shock (operation) 30g (EN 60068-2-27) Environmental Product Compliance REACh SVHC Lead 7439-92-1 Classifications eCl@ss eCl@ss 10.0.1 19170402 eCl@ss 11.0 19170402 eCl@ss 9.0 19170106 UNSPSC UNSPSC 18.0 43222612 UNSPSC 19.0 43222612 UNSPSC 20.0 43222612 UNSPSC 21.0 43222612 Accessories Accessories Assembly adapter Mounting plate - FL DIN-RAIL ADAPTER 22.5 - 1085485 The FL DIN-RAIL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a standard 35 mm DIN rail, in any orientation.     Mounting plate - FL PANEL ADAPTER 22.5 - 1085488 The FL PANEL ADAPTER 22.5 is designed to allow products 22.5 mm wide to be mounted flush to a panel, in any orientation.     Data cable preassembled 03/18/2022   Page 4 / 7 https://www.phoenixcontact.com/us/products/1085163 Industrial Ethernet Switch - FL SWITCH 1105NT - 1085163 Accessories Patch cable - NBC-R4AC-R4AC-IE8A/.../... - 1411854 Patch cable, degree of protection: IP20, number of positions: 8, 10 Gbps, CAT6A, cable outlet: straight, Ethernet     Patch cable - NBC-R4AC/10G-R4AC/10G-94F/2,0 - 1408360 Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 2.0 m     Patch cable - NBC-R4AC/10G-R4AC/10G-94F/3,0 - 1408365 Patch cable, CAT6A, 4-pair, shielded, connection not crossed (line), assembled at both ends with RJ45/IP20 connectors, outer sheath material: PUR, length: 3.0 m     End block End clamp - E/NS 35 N - 0800886 End clamp, width: 9.5 mm, color: gray     Patch cable Patch cable - FL CAT5 PATCH 0,5 - 2832263 Patch cable, CAT5, assembled, 0.5 m     03/18/2022   Page 5 / 7 https://www.phoenixcontact.com/us/products/1085163 Industrial Ethernet Switch - FL SWITCH 1105NT - 1085163 Accessories Patch cable - FL CAT5 PATCH 1,0 - 2832276 Patch cable, CAT5, assembled, 1 m     Patch cable - FL CAT5 PATCH 2,0 - 2832289 Patch cable, CAT5, assembled, 2 m     PCB plug PCB connector - FKCT 2,5/ 3-ST KMGY BD:US,GND - 1087544 PCB connector, nominal cross section: 2.5 mm², color: light gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of rows: 1, number of positions: 3, product range: FKCT 2,5/..-ST, pitch: 5 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: CLASSIC COMBICON, Locking: without, mounting: without, type of packaging: packed in cardboard     Printed-circuit board connector - FKCT 2,5/ 3-ST KMGY - 1998263 PCB connector, nominal cross section: 2.5 mm², color: light gray, nominal current: 12 A, rated voltage (III/2): 320 V, contact surface: Tin, type of contact: Female connector, number of potentials: 3, number of rows: 1, number of positions: 3, number of connections: 3, product range: FKCT 2,5/..-ST, pitch: 5 mm, connection method: Push-in spring connection, conductor/PCB connection direction: 0 °, locking clip: - Locking clip, plug-in system: CLASSIC COMBICON, Locking: without, mounting: without, type of packaging: packed in cardboard     Protective cap 03/18/2022   Page 6 / 7 https://www.phoenixcontact.com/us/products/1085163 Industrial Ethernet Switch - FL SWITCH 1105NT - 1085163 Accessories Dust protection - FL RJ45 PROTECT CAP - 2832991 Dust protection caps for RJ45 socket     Surge protection for information technology Surge protection device - DT-LAN-CAT.6+ - 2881007 Surge protection in accordance with Class EA (CAT6A), for Gigabit Ethernet (up to 10 Gbps), token ring, FDDI/CDDI, ISDN, and DS1. Suitable for Power over Ethernet (PoE++ / 4PPoE) “Mode A” and “Mode B”. RJ45 attachment plug with separate grounding cable and ground connection snap-on foot for NS 35 DIN rails.     Phoenix Contact 2022 © - all rights reserved http://www.phoenixcontact.com 03/18/2022   Page 7 / 7