EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user
documentation. Our general terms of use for downloads are valid.
CHARX connect standard, DC charging cable, with vehicle charging connector and open cable end, for charging electric vehicles (EV)
with direct current (DC), with charging connector holder, with analog temperature sensors, CCS type 1, SAE J1772, IEC 62196-3, 200 A
/ 1000 V (DC), PHOENIX CONTACT logo, cable: 6 m, black, straight
Product description
DC charging cable with vehicle charging connector and free cable end for fast charging of electric vehicles (EV) with direct current (DC) via CCS
type 1 vehicle charging inlets, for installation at charging stations for e-mobility (EVSE)
Your advantages
• Complete product range
• The right charging cable for every application, from the carport to the charging park
• Convenient handling due to the ergonomic design
• Available with your logo on request – for consistent branding of your charging station
• Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001
Commercial data
Item number
1101122
Packing unit
1 pc
Minimum order quantity
1 pc
Sales key
EM01
Product key
XWBAAB
GTIN
4055626957562
Weight per piece (including packing)
13,500 g
Weight per piece (excluding packing)
13,000 g
Customs tariff number
85444290
Country of origin
DE
Jan 8, 2024, 9:50 AM
Page 1 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Technical data
Product properties
Product type
DC charging cable
Product family
CHARX connect standard
Application
for charging electric vehicles (EV) with direct current (DC)
for installation at charging stations for electromobility (EVSE)
Type
DC charging cable
with vehicle charging connector and open cable end
Design
with charging connector holder
with analog temperature sensors
Technology
Combined Charging System
Affixed logo
PHOENIX CONTACT logo
Label
8.9 mm x 28.9 mm (customer logo on request)
Charging standard
CCS type 1
Charging mode
Mode 4
DC level 2
Electrical properties
Type of signal transmission
Pulse width modulation with modulated Powerline
communication in accordance with ISO/IEC 15118 / DIN SPEC
70121
Note on the connection method
Crimp connection, cannot be disconnected
Coding
480 Ω (Lever actuated)
150 Ω (Lever not actuated)
Temperature monitoring
2x Pt 1000
Type of charging current
DC
Charging power
200 kW
Charging current
200 A
Type of charging current
DC Boost Mode
Charging power
up to 500 kW (Boost Mode, depending on the ambient
conditions. For detailed information, see the packing slip in the
download area for this item.)
Charging current
up to 500 A (Boost Mode, depending on the ambient conditions.
For detailed information, see the packing slip in the download
area for this item.)
Power contact
Number
3 (PE, DC+, DC-)
Rated voltage
1000 V DC
Rated current
200 A (up to 40 °C)
Signal contact
Number
2 (CP, CS)
Rated voltage
30 V AC
Rated current
2A
Jan 8, 2024, 9:50 AM
Page 2 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Temperature sensors (Pt 1000)
Sensor type
Pt 1000
Standards/regulations
DIN EN 60751
Attachment point
Sensor for the DC contacts
Switch-off temperature
90 °C ±1 K (equivalent to a Pt 1000 value of 1346.5 Ω)
Long-term stability
0.06 % (after 1000 hours at 130 °C)
Recommended measured current
1 mA (1 V at 0°C)
Coefficient
3850 ppm/K
Ambient temperature
-50 °C ... 130 °C (Operation)
Dimensions
Vehicle charging connector
Width
69.6 mm
Height
192.6 mm
Depth
284.6 mm
Material specifications
Color (Housing)
black (9005)
Color (Handle area)
black (9005)
Color (Mating face)
black (9005)
Color (Protective cap)
black (9005)
Color (Cable)
black (9005)
Material (Vehicle charging connector)
Plastic
Material (Cable outer sheath)
TPE
Material (Contact surface)
Silver
Flammability rating according to UL 94
V0 (Mating face)
Cable/line
Cable length
6 m ±45 mm
Wiring standards/regulations
UL 62
FFSO7.E343212
Cable weight
max. 1900 kg/km
Cable type
straight
Cable structure
2 x 1 AWG + 1 x 3 AWG + 3 x 2 x 18 AWG
External cable diameter
35.3 mm ±0.5 mm
Outer sheath, material
TPE
Stripping length of the sheath
180 mm ±10 mm
Cable resistance
≤ 0.00044 Ω/m (based on a power core, at an ambient
temperature of 20°C)
Bending radius
min. 529.5 mm (15x diameter)
Mechanical properties
Mechanical data
Jan 8, 2024, 9:50 AM
Page 3 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Insertion/withdrawal cycles
> 10000
Insertion force
< 75 N
Withdrawal force
< 75 N
Environmental and real-life conditions
Ambient conditions
Degree of protection (Vehicle charging connector)
IP54 / Type 3R (The degree of protection is only ensured in the
ready and plugged-in state when both plug-in components are
original products from Phoenix Contact or suitable standardcompliant products.)
Ambient temperature (operation)
-30 °C ... 40 °C
max. 55 °C (Current reduction required, observe the DC contact
temperature limit value of 90°C)
Ambient temperature (storage/transport)
-40 °C ... 80 °C
Altitude
5000 m (above sea level)
Standards and regulations
Standards
Standards/regulations
SAE J1772
IEC 62196-3
Jan 8, 2024, 9:50 AM
Page 4 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Drawings
Dimensional drawing
284,6
60,3
43,8
32,8
18,5
192,7
80,3
112
26,6
29,2
33,5
6,9
84,4
60,5
248,7
69,6
Make sure that the vehicle charging connector is placed in an appropriate charging connector holder, which ensures a minimum protection rating of
IP24 in accordance with IEC 61851-1, for the entire time between charging. To create this charging connector holder, use the dimensions of the
vehicle charging connector. Detailed dimensions can also be found in the Download area.
Schematic diagram
DC
AC
The Combined Charging System (CCS) principle - standard-compliant charging system for electric vehicles, which supports both conventional AC
charging and fast DC charging. Both Vehicle Connectors fit into the CCS Vehicle Inlet.
Jan 8, 2024, 9:50 AM
Page 5 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Schematic diagram
PE
CS
DC+
CP
DC-
Pin assignment of the Vehicle Connector
Jan 8, 2024, 9:50 AM
Page 6 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Schematic diagram
Warnings regarding use
Jan 8, 2024, 9:50 AM
Page 7 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Schematic diagram
DC
[I]
DC
[II]
DC
[III]
DC
[IV]
[V]
DC
Operating instructions
Jan 8, 2024, 9:50 AM
Page 8 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Schematic diagram
45°
90°
0°
315°
135°
180°
270°
225°
The resting position must be installed in the charging station such that the user cannot hang up the vehicle connector upside down (90° to 270°).
However, positions rotated upward (45°) or downward (315°) are options for a resting position.
Jan 8, 2024, 9:50 AM
Page 9 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Approvals
To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1101122
cULus Recognized
Approval ID: E473195-20220131
Nominal voltage UN
Nominal current IN
Cross section AWG
Cross section mm2
1000 V
200 A
-
-
Jan 8, 2024, 9:50 AM
Page 10 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Classifications
ECLASS
ECLASS-11.0
27144705
ECLASS-12.0
27144705
ECLASS-13.0
27144705
ETIM
ETIM 9.0
EC002897
UNSPSC
UNSPSC 21.0
39121500
Jan 8, 2024, 9:50 AM
Page 11 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Environmental product compliance
China RoHS
Environmentally Friendly Use Period = 10;
For information on hazardous substances, refer to the
manufacturer’s declaration available under “Downloads”
Jan 8, 2024, 9:50 AM
Page 12 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
Accessories
EV-T1CCS-PARK - Charging connector holder
1624143
https://www.phoenixcontact.com/us/products/1624143
CHARX connect, Charging connector
holder, Accessories, for vehicle
charging connectors on charging
stations (EVSE), CCS type 1,
SAE J1772, Front mounting, housing:
black
EV-T1CCS-MF-M4X10-BIT-C - Repair kit
1158266
https://www.phoenixcontact.com/us/products/1158266
CHARX connect standard, Repair kit,
Accessories, with DC contact holder
with integrated front part of the DC
contacts, with replaceable mating face
frame, with 5x M4X10 flat-head
screws with Torx safety drive
(IPR TORX PLUS), with special
bit (867/4 IPR TORX PLUS® bit, 20
IPR x 89 mm) for insulated
screwdriver, for replacement of the
mating face frame of vehicle charging
connectors, CCS type 1, IEC 62196-3,
SAE J1772, Screw mounting,
housing: black, The vehicle connector
housing does not have to be opened
in order to replace the mating face
frame.
Jan 8, 2024, 9:50 AM
Page 13 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
EV-T1CCS-MF-M4X10-C - Repair kit
1288248
https://www.phoenixcontact.com/us/products/1288248
CHARX connect standard, Repair kit,
Accessories, with DC contact holder
with integrated front part of the DC
contacts, with replaceable mating face
frame, with 5x M4X10 flat-head
screws with Torx safety drive
(IPR TORX PLUS), for
replacement of the mating face frame
of vehicle charging connectors, CCS
type 1, IEC 62196-3, SAE J1772,
Screw mounting, housing: black, The
vehicle connector housing does not
have to be opened in order to replace
the mating face frame.
EV-T1CCS-MF-M4X10-BIT - Repair kit
1085801
https://www.phoenixcontact.com/us/products/1085801
CHARX connect, Repair kit,
Accessories, with replaceable mating
face frame, with 5x M4X10 flat-head
screws with Torx safety drive
(IPR TORX PLUS), with special
bit (867/4 IPR TORX PLUS® bit, 20
IPR x 89 mm) for insulated
screwdriver, for replacement of the
mating face frame of vehicle charging
connectors, CCS type 1, IEC 621963-1, SAE J1772, Screw mounting,
housing: black, Replacement without
draining the coolant
Jan 8, 2024, 9:50 AM
Page 14 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
EV-T1CCS-MF-M4X10 - Repair kit
1085800
https://www.phoenixcontact.com/us/products/1085800
CHARX connect, Repair kit,
Accessories, with replaceable mating
face frame, with 5x M4X10 flat-head
screws with Torx safety drive
(IPR TORX PLUS), for
replacement of the mating face frame
of vehicle charging connectors, CCS
type 1, IEC 62196-3-1, SAE J1772,
Screw mounting, housing: black,
Replacement without draining the
coolant
EV-T1CCS-M4X20-BIT-C - Repair kit
1288250
https://www.phoenixcontact.com/us/products/1288250
CHARX connect standard, Repair kit,
Accessories, with DC contact holder
with integrated front part of the DC
contacts, with special bit (867/4 IPR
TORX PLUS® bit, 20 IPR x 89 mm)
for insulated screwdriver, CCS type 1,
IEC 62196-3, SAE J1772, Screw
mounting, housing: black
Jan 8, 2024, 9:50 AM
Page 15 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
EV-T1CCS-M4X20-C - Repair kit
1288247
https://www.phoenixcontact.com/us/products/1288247
CHARX connect standard, Repair kit,
Accessories, with DC contact holder
with integrated front part of the DC
contacts, CCS type 1, IEC 62196-3,
SAE J1772, Screw mounting,
housing: black
G-INSEC-M63-L68N-NCRS-S - Cable gland
1411194
https://www.phoenixcontact.com/us/products/1411194
Cable gland, material for screw connection: Brass, nickel-plated, external cable
diameter 32 mm ... 42 mm, shielding: yes, connecting thread: M63 x 1.5, color:
silver, with O-ring
CHARX PS/3AC/920DC/87.5KW - DC power module
1162690
https://www.phoenixcontact.com/us/products/1162690
CHARX power basic, Fast charging
module for setting up DC charging
stations, Rack mounting, input: 3phase, output: 200 V DC...920 V DC /
125 A. The corresponding system
control cabinet CHARX PS-CAB/4x87.
5KW (Item No. 1165442) is necessary
for operating the DC power module
Jan 8, 2024, 9:50 AM
Page 16 (17)
EV-T1G2CC-DC200A-6,0M1ASBK11 - DC charging
cable
1101122
https://www.phoenixcontact.com/us/products/1101122
CHARX PS-M2/3AC/1000DC/30KW - DC power module
1232243
https://www.phoenixcontact.com/us/products/1232243
CHARX power basic, Fast charging
module for setting up DC charging
stations, 19" rack mounting, CAN bus,
input: 3-phase, output: 30 V DC...
1000 V DC / 0 A...100 A
CHARX PS-M2/825DC/1000DC/30KW - DC power module
1296467
https://www.phoenixcontact.com/us/products/1296467
CHARX power basic, Fast charging
module for setting up DC charging
stations, 19" rack mounting, CAN bus,
output: 30 V DC...1000 V DC / 0 A...
100 A
Phoenix Contact 2024 © - all rights reserved
https://www.phoenixcontact.com
Phoenix Contact USA
586 Fulling Mill Road
Middletown, PA 17057, United States
(+717) 944-1300
info@phoenixcon.com
Jan 8, 2024, 9:50 AM
Page 17 (17)