1106633

https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) CHARX connect, DC charging cable with vehicle charging connector and open cable end, Housing color black, with connected PP contact, For charging electric vehicles (EV) with direct current (DC), for installation at charging stations for electromobility (EVSE), CCS type 2, Combined Charging System, IEC 62196-3, 80 A / 1000 V (DC), C-Line, “PHOENIX CONTACT” logo, cable: 5 m, black, straight Product Description DC charging cable with Vehicle Connector and open cable end for fast charging of electric vehicles (EV) with direct current (DC) via CCS type 2 Vehicle Inlets, for installation at charging stations for E-Mobility (EVSE) Your advantages  Consistent design of all Phoenix Contact Vehicle Connectors and Infrastructure Plugs  Silver-plated surface of the power and signal contacts  Developed and produced in accordance with the IATF 16949 automotive standard and ISO 9001  Convenient handling, thanks to the ergonomic handle  Integrated temperature sensors for monitoring the temperature at the power contacts Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626997476 Custom tariff number 85444290 Country of origin Germany Technical data Product definition Type DC charging cable with vehicle charging connector and open cable end Housing color black 08/25/2021   Page 1 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Technical data Product definition with connected PP contact Application For charging electric vehicles (EV) with direct current (DC) for installation at charging stations for electromobility (EVSE) Affixed logo “PHOENIX CONTACT” logo Design C-Line Standards/regulations IEC 62196-3 Charging standard CCS type 2 Combined Charging System Charging mode Mode 4 Dimensions Height 144 mm (Vehicle charging connector) Width 71 mm (Vehicle charging connector) Depth 243 mm (Vehicle charging connector) Conductor length 5m Stripping length 140 mm ±10 mm Ambient conditions Ambient temperature (operation) -30 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Max. altitude 5000 m (above sea level) Degree of protection IP54 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) Electrical properties Charging power (nominal operation) 80 kW Number of power contacts 3 (PE, DC+, DC-) Rated current of power contacts 80 A (up to 40 °C) Rated voltage for power contacts 1000 V DC Number of signal contacts 2 (CP, PP) Rated current for signal contacts 2A Rated voltage for signal contacts 30 V AC Type of signal transmission Pulse width modulation with modulated Powerline communication according to ISO/IEC 15118 / DIN SPEC 70121 Note on the connection method Crimp connection, cannot be disconnected Resistor coding 1500 Ω (between PE and PP) Temperature monitoring 2x Pt 1000 Mechanical properties 08/25/2021   Page 2 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Technical data Mechanical properties Insertion/withdrawal cycles > 10000 Insertion force < 100 N Withdrawal force < 100 N Design Design line Standard Housing color black Mating face color black Color handle area black Label 8.9 mm x 28.9 mm (customer logo on request) Material Housing material Plastic Material handle area Plastic Material mating face Plastic Flammability rating V0 Material surface of contacts Ag Cable Cable structure 3 x 16 mm² + 3 x 2 x 0.75 mm² Wiring standards/regulations prEN 50620 / DIN EN 50620 Wiring class Class 6 External cable diameter 21.2 mm ±0.4 mm Type of conductor straight Cable resistance ≤ 0.00121 Ω/m (based on a power core, at an ambient temperature of 20°C) Outer sheath, material TPE-U External sheath, color black Minimum bending radius 212 mm (10 x diameter) Cable weight max. 820 kg/km Temperature sensors Type of sensor Pt 1000 Standards/regulations DIN EN 60751 Recommended measured current 1 mA (1 V at 0°C) Tolerance at the sensor with the recommended measured current ±1K Temperature range -50 °C ... 130 °C Temperature coefficient (TCR) 3850 ppm/K Long-term stability (max. R0-Drift) 0.06 % (After 1000 hours at 130°C) Shutdown temperature 90 °C equivalent to a Pt 1000 value of 1346.5 Ω 08/25/2021   Page 3 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Technical data Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 10; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Schematic diagram PE CP PP DC+ DC- Pin assignment of the Vehicle Connector Schematic diagram DC AC The Combined Charging System (CCS) principle - standard-compliant charging system for electric vehicles, which supports both conventional AC charging and fast DC charging. Both Vehicle Connectors fit into the CCS Vehicle Inlet. 08/25/2021   Page 4 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Dimensional drawing 71 63 144 98,9 97,8 93,7 2,6 242,7 35,3 48,5 37,3 113,9 46,4 Dimensional drawing 08/25/2021   Page 5 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Schematic diagram DC [I] DC [II] DC [III] DC [IV] [V] Operating instructions DC 08/25/2021   Page 6 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Classifications eCl@ss eCl@ss 10.0.1 27144705 eCl@ss 11.0 27144705 eCl@ss 9.0 27144705 ETIM ETIM 7.0 EC002897 UNSPSC UNSPSC 18.0 39121522 UNSPSC 19.0 39121522 UNSPSC 20.0 39121522 UNSPSC 21.0 39121522 Approvals Approvals Approvals IECEE CB Scheme Ex Approvals Approval details IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 80 V Nominal current IN 1000 A  DE1-64088 Accessories Accessories Adhesive label 08/25/2021   Page 7 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Accessories Label - EV-LABEL-K - 1309761 CHARX connect, Label, accordance to DIN EN 17186, for DC charging cables, for voltage range from 50 V to 500 V, Marking K for CCS type 2 vehicle charging connectors and type 2 vehicle charging inlets     Label - EV-LABEL-L - 1309765 CHARX connect, Label, accordance to DIN EN 17186, for DC charging cables, for voltage range from 200 V to 920 V, Marking L for CCS type 2 vehicle charging connectors and type 2 vehicle charging inlets     Charging connector holder Charging connector holder - EV-T2CCS-PARK - 1624153 CHARX connect, Charging connector holder, for vehicle charging connectors on charging stations (EVSE), CCS type 2, IEC 62196-3, Front mounting, Item is not compatible with the HPC CCS type 2 charging cable from Phoenix Contact.     DC charging controller DC charging controller - EV-PLCC-AC1-DC1 - 1624130 Programmable charging controller for DC and AC charging of electric vehicles in accordance with IEC 61851-1,-23, DIN SPEC 70121 with integrated 3G mobile network modem     DC power module 08/25/2021   Page 8 / 9 https://www.phoenixcontact.com/us/products/1106633 DC charging cable - EV-T2G4CC-DC80A-5,0M16ESBK11 - 1106633 Accessories DC power module - CHARX PS/3AC/920DC/87.5KW - 1162690 CHARX power, Fast charging module for setting up DC charging stations, Rack mounting, input: 3-phase, output: 200 V DC...920 V DC / 125 A. The corresponding system control cabinet CHARX PS-CAB/4x87.5KW (Order No. 1165442) is necessary for operating the DC power module     DC power module - CHARX PS-M2/3AC/1000DC/30KW - 1232243 CHARX power, Fast charging module for setting up DC charging stations, 19" rack mounting, CAN bus, input: 3-phase, output: 150 V DC...1000 V DC / 0 A...100 A     DC power module - CHARX PS-M2/825DC/1000DC/30KW - 1296467 CHARX power, Fast charging module for setting up DC charging stations, 19" rack mounting, CAN bus, output: 150 V DC...1000 V DC / 0 A...100 A     Full screw connection Cable gland - G-INS-M32-L68N-PNES-BK - 1424483 Cable gland, cable gland material: PA, external cable diameter 18 mm ... 25 mm, shielding: no, connecting thread: M32 x 1.5, color: jet black RAL 9005     Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 08/25/2021   Page 9 / 9