1107268

SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Power connector, 4-position, Plug straight M12, coding: S, Screw connection, knurl material: Zinc die-cast, nickel-plated, cable gland Pg9, external cable diameter 6 mm ... 8 mm, for AC current up to 12 A/630 V, Contact 4 leading Your advantages • Safe use in the field, thanks to a high degree of protection • Screw connection: proven connection technology for a large selection of different conductors • High-performance: AC connectors for up to 12 A and 630 V AC • Protection against incorrect connection using special S-coding Commercial data Item number 1107268 Packing unit 1 pc Minimum order quantity 1 pc Sales key BF30 Product key BF2CAB GTIN 4063151008475 Weight per piece (including packing) 24.23 g Weight per piece (excluding packing) 22.22 g Customs tariff number 85366990 Country of origin DE Jan 8, 2024, 9:50 AM Page 1 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Technical data Notes General Strip 21 mm off the cable sheath, strip 6 mm off the conductor insulation, crimp the ferrule, then shorten this to 5 mm. Conductor length with shortened ferrule: 20 mm. Connect conductors and tighten the mounting screws with 0.2 Nm. General NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g. by using cable ties. Mounting Connection method Screw connection Product properties Product type Circular connector (cable-side) Number of positions 4 Application Power supply No. of cable outlets 1 Shielded no Coding S Cable outlet straight Pg screw connection Pg9 Insulation characteristics Overvoltage category III Degree of pollution 3 Dimensions Dimensional drawing Length 60 mm Wrench size, union nut 16 mm External dimensions Outside diameter 6 mm ... 8 mm Housing Diameter housing 20 mm Material specifications Flammability rating according to UL 94 V0 Seal material NBR Material of grip body PA Contact material CuZn Contact surface material Au Jan 8, 2024, 9:50 AM Page 2 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Contact carrier material PA Material for screw connection Zinc die-cast, nickel-plated Connection data Conductor connection Connection method Screw connection Connection cross section 0.75 mm² ... 1.5 mm² (with ferrule) 0.75 mm² ... 2.5 mm² (solid) Connection cross section AWG 18 ... 16 (with ferrule) Stripping length of the individual wire 5 mm Tightening torque 0.4 Nm (M12 knurl) 0.8 Nm ... 1 Nm (Pressure screw with sleeve housing) 0.4 Nm (Screw plug insert with sleeve housing as far it will go) 0.2 Nm (Screw terminal blocks) Electrical properties Rated surge voltage 6 kV Contact resistance ≤ 5 mΩ Insulation resistance > 10 GΩ Nominal voltage UN 630 V AC Nominal current IN 12 A (when using 1.5 mm² conductors) 12 A (at 40 °C) Mechanical properties Mechanical data Insertion/withdrawal cycles ≥ 100 Connector Connection 1 Head design Plug Head cable outlet straight Head thread type M12 Coding S Cable/line Stripping length of the individual wire 5 mm Environmental and real-life conditions Ambient conditions Degree of protection IP67 Ambient temperature (operation) -40 °C ... 85 °C (Plug / socket) Standards and regulations Jan 8, 2024, 9:50 AM Page 3 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 M12 Standard designation M12 connector Standards/specifications IEC 61076-2-111 Jan 8, 2024, 9:50 AM Page 4 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Drawings Dimensional drawing 20 18 M12 60 18 Plug, M12 x 1, straight Schematic diagram 5 1 2 3 M12 plug pin assignment, 4-pos., S-coded, plug side view Jan 8, 2024, 9:50 AM Page 5 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1107268    cUL Recognized Approval ID: FILE E 221474 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 12 A - 16 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 12 A - 16 - UL Recognized Approval ID: FILE E 221474 EAC Approval ID: RU C-DE.BL08.B.00511 cULus Recognized Jan 8, 2024, 9:50 AM Page 6 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 8.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 9:50 AM Page 7 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:50 AM Page 8 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 Accessories A 1,5 - 7 - Ferrule 3200263 https://www.phoenixcontact.com/us/products/3200263 Ferrule, color: silver PROT-M12 FS-PA-CHAIN - Sealing cap 1430873 https://www.phoenixcontact.com/us/products/1430873 M12 sealing cap made of plastic with fixing band, for sensor cables, for free M12 plugs Jan 8, 2024, 9:50 AM Page 9 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 TSD 04 SAC - Torque screwdriver 1208429 https://www.phoenixcontact.com/us/products/1208429 Torque screwdriver, with preset torque of 0.4 Nm and 4 mm hexagonal drive for M12 connectors TSD-M 1,2NM - Torque screwdriver 1212224 https://www.phoenixcontact.com/us/products/1212224 Torque screw driver, accuracy as per EN ISO 6789 standard, adjustable from 0.  3 ‑ 1.2 Nm Jan 8, 2024, 9:50 AM Page 10 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 TSD-M SAC-BIT ADAPTER - Adapter insert 1212600 https://www.phoenixcontact.com/us/products/1212600 Adapter bit for TSD-M...torque tools, E6.3-1/4" drive with 4 mm hexagon to accommodate SAC bits SACC BIT M12-D20 - Tool 1208445 https://www.phoenixcontact.com/us/products/1208445 Nut for assembling M12 connectors for assembly with a knurl diameter of 20 mm, for 4 mm hexagonal drive Jan 8, 2024, 9:50 AM Page 11 (12) SACC-M12MSS-3PECON-PG 9-M - Power connector 1107268 https://www.phoenixcontact.com/us/products/1107268 WIREFOX 6SC - Stripping tool 1212158 https://www.phoenixcontact.com/us/products/1212158 Stripping tool, for cables and conductors (especially for cables protected against short circuits and ground leakages) 1.5 - 6 mm2, self-adjusting, stripping length of up to 18 mm, cutting capacity of up to 10 mm 2 stranded/1.5 mm 2 solid, replaceable stripping blade CRIMPFOX 6H - Crimping pliers 1212046 https://www.phoenixcontact.com/us/products/1212046 Crimping pliers, for ferrules without insulating collar according to DIN 46228 Part 1 and ferrules with insulating collar according to DIN 46228 Part 4, 0.14 mm2 ...   6 mm2, unlockable pressure lock, lateral entry Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:50 AM Page 12 (12)