1110466

UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Primary-switched power supply unit, UNO POWER, Screw connection, DIN rail mounting, input: 1-phase, output: 24 V DC / 5 A, adjustable from 24 V DC ... 28 V DC Your advantages • Save space in the control cabinet with an extremely narrow overall width of just 35 mm • Save energy, thanks to a high degree of efficiency • Outdoor installation possible, with a wide temperature range of -25°C … +70°C • Simple output voltage monitoring, thanks to the floating DC OK relay contact Commercial data Item number 1110466 Packing unit 1 pc Minimum order quantity 1 pc Product key CMPV13 GTIN 4063151024659 Weight per piece (including packing) 472 g Weight per piece (excluding packing) 310 g Customs tariff number 85044095 Country of origin VN Jan 8, 2024, 9:50 AM Page 1 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Technical data Input data AC operation Supply system configuration Star network (TN, TT, IT (PE)) Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 100 V AC ... 240 V AC -15 % ... +10 % Derating < 100 V AC (1 %/V) Typical national grid voltage 120 V AC 230 V AC Voltage type of supply voltage AC Inrush current typ. 35 A (at 25 °C) 2 Inrush current integral (I t) < 0.7 A2s Frequency range (fN) 50 Hz ... 60 Hz ±10 % Mains buffering time typ. 25 ms (120 V AC) typ. 25 ms (230 V AC) Current consumption 1.34 A (100 V AC) 1.1 A (120 V AC) 0.59 A (230 V AC) 0.57 A (240 V AC) Protective circuit Transient surge protection; Varistor Switch-on time typ. 1 s Device mains fuse 3.15 A internal (device protection), slow-blow Recommended breaker for input protection 6 A ... 16 A (Characteristic B, C, D, K or comparable) Discharge current to PE < 0.25 mA Output data Efficiency typ. 93 % (120 V AC) typ. 94 % (230 V AC) Nominal output voltage 24 V DC Setting range of the output voltage (USet) 24 V DC ... 28 V DC (> 24 V DC, constant capacity restricted) Nominal output current (IN) 5A Short-circuit-proof yes No-load proof yes Crest factor typ. 1.93 (120 V AC) typ. 2.05 (230 V AC) Output power (PN) 120 W Connection in parallel yes, for increasing power and redundancy with diode Connection in series yes, for increased output voltage Feedback voltage resistance ≤ 35 V DC Protection against overvoltage at the output (OVP) ≤ 35 V DC Residual ripple typ. 70 mVPP (with nominal values) < 1 % (change in load, static 10 % ... 90 %) Jan 8, 2024, 9:50 AM Page 2 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Control deviation < 3 % (change in load, dynamic 10 % ... 90 %) < 0.1 % (change in input voltage ±10 %) Rise time < 1 s (UOut = 10 % ... 90 %) Minimum no-load power dissipation < 0.4 W (120 V AC) Maximum no-load power dissipation < 0.75 W (230 V AC) Minimum nominal load power dissipation < 9 W (120 V AC) Power loss nominal load max. < 7.5 W (230 V AC) Signal relay 13/14 Connection level 3.x Connection labeling 3.1 (13), 3.2 (14) Switch contact (floating) OptoMOS Switching voltage max. 30 V AC/DC max. 60 V DC Current carrying capacity max. 50 mA State condition DC OK (UOut > 0,9 x UN) (Contact closed) UOUT  0,9 x UN (On (green), DC OK) Electrical properties Number of phases 1.00 Insulation voltage input/output 4 kV AC (type test) 3.75 kV AC (routine test) Product properties Product type Power supply Product family UNO POWER MTBF (IEC 61709, SN 29500) > 1442000 h (25 °C) > 813000 h (40 °C) > 428000 h (55 °C) Environmental protection directive RoHS Directive 2011/65/EU WEEE Reach Jan 8, 2024, 9:50 AM Page 4 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Insulation characteristics Protection class II Degree of pollution 2 Dimensions Item dimensions Width 35 mm Height 130 mm Depth 129 mm 125 mm (Device depth (DIN rail mounting)) Installation dimensions Installation distance right/left (active, passive) 0 mm / 0 mm (POut ≥50% ) Installation distance top/bottom (active, passive) 30 mm / 30 mm (POut ≥50% ) Mounting Mounting type DIN rail mounting Assembly instructions alignable: 0 mm horizontally, 30 mm vertically Mounting position horizontal DIN rail NS 35, EN 60715 With protective coating No Material specifications Flammability rating according to UL 94 V0 (Housing, terminal blocks) Housing material Plastic Type of housing Polycarbonate Foot latch material PBT (polybutylene terephthalate) Housing material Polycarbonate Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 55 °C Derating: 2.5 %/K) Ambient temperature (storage/transport) -40 °C ... 85 °C Ambient temperature (start-up type tested) -40 °C Maximum altitude ≤ 4000 m (> 2000 m, Derating: 10 %/1000 m) Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Shock (operation) 18 ms, 30g, per spatial direction (IEC 60068-2-27) Vibration (operation) 10 Hz ... 50 Hz, amplitude ±0.2 mm 50 Hz to 150 Hz, 2.3 g, 90 min. Standards and regulations Overvoltage category EN 61010-1 II (≤ 4000 m) Jan 8, 2024, 9:50 AM Page 5 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Overvoltage category EN 62477-1 III (≤3000 m)  Safety of power supply units up to 1100 V (insulation distances) Standard designation Safety of power supply units up to 1100 V (insulation distances) Standards/specifications DIN EN 61558-2-16 Electrical safety Standard designation Electrical safety Standards/specifications IEC 61010-2-201 (SELV) Electronic equipment for use in power installations Standard designation Equipping high voltage installations with electronic equipment Standards/specifications EN 50178/VDE 0160 (PELV) Safety for measurement, control, and laboratory equipment Standard designation Safety for equipment for measurement, control, and laboratory use Standards/specifications IEC 61010-1 Protective extra-low voltage Standard designation Protective extra-low voltage Standards/specifications IEC 61010-1 (SELV) IEC 61010-2-201 (PELV) Safe isolation Standard designation Safe isolation Standards/specifications IEC 61558-2-16 IEC 61010-2-201 Limitation of harmonic line currents Standard designation Limitation of harmonic line currents Standards/specifications EN 61000-3-2 Mains voltage dips Standard designation Requirement of the semiconductor industry with regard to mains voltage dips Standards/specifications SEMI F47 - 0706 (185 V AC) Approvals UL Identification UL/C-UL Listed UL 61010-1 UL Identification UL/C-UL Listed UL 61010-2-201 UL Identification UL/C-UL Listed ANSI/UL 121201 Class I, Division 2, Groups A, B, C, D (Hazardous Location) Jan 8, 2024, 9:50 AM Page 6 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 SIQ Identification CB scheme (IEC 61010-1, IEC 61010-2-201) EMC data Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC Interference emission Interference emission in accordance with EN 61000-6-3 (residential and commercial) and EN 61000-6-4 (industrial) EMC requirements for noise immunity EN 61000-6-2 Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Conducted noise emission EN 55016 EN 61000-6-3 (Class B) Noise emission EN 55016 EN 61000-6-3 (Class B) Harmonic currents Standards/regulations EN 61000-3-2 EN 61000-3-2 (Class A) Frequency range 0 kHz ... 2 kHz Flicker Standards/regulations EN 61000-3-3 Frequency range 0 kHz ... 2 kHz Electrostatic discharge Standards/regulations EN 61000-4-2 Electrostatic discharge Contact discharge 6 kV (Test Level 3) Discharge in air 8 kV (Test Level 3) Comments Criterion A Electromagnetic HF field Standards/regulations EN 61000-4-3 Electromagnetic HF field Frequency range 80 MHz ... 1 GHz Test field strength 10 V/m (Test Level 3) Frequency range 1 GHz ... 6 GHz Test field strength 10 V/m (Test Level 3) Comments Criterion A Fast transients (burst) Standards/regulations EN 61000-4-4 Fast transients (burst) Input 4 kV (Test Level 4 - asymmetrical) Output 2 kV (Test Level 3 - asymmetrical) Jan 8, 2024, 9:50 AM Page 7 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Comments Criterion A Surge voltage load (surge) Standards/regulations EN 61000-4-5 Input 2 kV (Test Level 4 - symmetrical) 4 kV (Test Level 4 - asymmetrical) Output 1 kV (Test Level 3 - symmetrical) 2 kV (Test Level 3 - asymmetrical) Comments Criterion A Conducted interference Standards/regulations EN 61000-4-6 Conducted interference Input/Output asymmetrical Frequency range 0.15 MHz ... 80 MHz Comments Criterion A Voltage 10 V (Test Level 3) Voltage dips Standards/regulations EN 61000-4-11 Voltage 230 V AC Frequency 50 Hz Voltage dip 70 % Number of periods 25 / 30 periods Comments Criterion A Voltage dip 40 % Number of periods 12 periods Additional text Test Level 2 Comments Criterion A Voltage dip 0% Number of periods 1 period Additional text Test Level 2 Comments Criterion B Criteria Criterion A Normal operating behavior within the specified limits. Criterion B Temporary impairment to operational behavior that is corrected by the device itself. Jan 8, 2024, 9:50 AM Page 8 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Drawings Dimensional drawing UNO POWER Ord.Nr.1110466 35 3.1 3.2 2.1 2.2 13 + 14 Output DC 24V 120W 24-28 V 130 DC OK Input AC 100-240V N L 1.1 1.2 Device dimensions (dimensions in mm) Jan 8, 2024, 9:50 AM Page 9 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Schematic diagram Housing Signaling 3.1 13 3.2 14 B Input L 1.1 N 1.2 Output A 2.1 + 2.2 – Test sections, insulation voltage Jan 8, 2024, 9:50 AM Page 10 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Block diagram Input AC L N 1.1 Output DC aktive PFC Filter 1.2 Filter Signal Functions UVP OVP 2.1 + 2.2 − 3.1 13 3.2 14 User Interface OTP OCP SCP UOUT DC OK Block diagram Power Factor Diagram 1,00 0,95 0,90 0,85 0,80 0,75 0,70 0,65 0,60 1 2 1 = UIn: 120 V AC/UOut: 24 V DC 2 = UIn: 230 V AC/UOut: 24 V DC 0 0,5 1 1,5 2 2,5 3 3,5 4 4,5 5 5,5 IOut [A] Power factor Jan 8, 2024, 9:50 AM Page 11 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Dimensional drawing 130 45 80 130 125 Device dimensions (dimensions in mm) IIn [A] Diagram 1,2 1,0 1 = UIn: 120 V AC/UOut: 24 V DC 2 = UIn: 230 V AC/UOut: 24 V DC 0,8 1 0,6 0,4 2 0,2 0,0 0 1 2 3 4 5 6 IOut [A] Input current/output current Jan 8, 2024, 9:50 AM Page 12 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Eta [%] Diagram 96 94 92 1 90 88 86 84 82 80 78 0,5 1 2 1 = UIn: 120 V AC/UOut: 24 V DC 2 = UIn: 230 V AC/UOut: 24 V DC 1,5 2 2,5 3 3,5 4 4,5 5 5,5 IOut [A] Efficiency POut [%] Diagram 120 110 100 90 80 70 60 50 PN 100% ≤ 50°C 0 1000 2000 3000 4000 5000 H [m] Output power/installation altitude Jan 8, 2024, 9:50 AM Page 13 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/pc/products/1110466  cULus Listed Approval ID: FILE E 123528  EAC  EAC  Approval ID: RU S-DE.BL08.W.00764 Approval ID: RU S-DE.BL08.W.00764 cULus Listed Approval ID: FILE E 199827 Jan 8, 2024, 9:50 AM Page 14 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Classifications ECLASS ECLASS-11.0 27040701 ECLASS-12.0 27040701 ECLASS-13.0 27040701 ETIM ETIM 9.0 EC002540 UNSPSC UNSPSC 21.0 39121000 Jan 8, 2024, 9:50 AM Page 15 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 25; For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Jan 8, 2024, 9:50 AM Page 16 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 Accessories UNO-DIODE/5-24DC/2X10/1X20 - Redundancy module 2905489 https://www.phoenixcontact.com/pc/products/2905489 Redundancy module, 5 V - 24 V DC, 2 x 10 A, 1 x 20 A. QUINT4-ORING/12-24DC/2X10/2X10 - Redundancy module 1088206 https://www.phoenixcontact.com/pc/products/1088206 Active redundancy module QUINT ORING with decoupling MOSFET, ACB Technology, DIN rail mounting, 12 V DC ... 24 V DC, 2x 10 A, 2x 10 A TRIO2-DIODE/12-24DC/2X20/1X40 - Redundancy module 2907379 https://www.phoenixcontact.com/pc/products/2907379 Redundancy module, 12 V - 24 V DC, 2 x 20 A, 1 x 40 A Jan 8, 2024, 9:50 AM Page 17 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 PLT-SEC-T3-230-FM-UT - Type 3 surge protection device 2907919 https://www.phoenixcontact.com/pc/products/2907919 Type 2/3 surge protection, consisting of protective plug and base element with screw connection. For singlephase power supply network with integrated status indicator and remote signaling. Nominal voltage: 230 V AC/DC CBMC E4 24DC/1-4A NO - Electronic circuit breaker 2906031 https://www.phoenixcontact.com/pc/products/2906031 Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. CBMC E4 24DC/1-10A NO - Electronic circuit breaker 2906032 https://www.phoenixcontact.com/pc/products/2906032 Multi-channel electronic circuit breaker for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. Jan 8, 2024, 9:50 AM Page 18 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 CBMC E4 24DC/1-4A+ IOL - Electronic circuit breaker 2910410 https://www.phoenixcontact.com/pc/products/2910410 Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. CBMC E4 24DC/1-10A IOL - Electronic circuit breaker 2910411 https://www.phoenixcontact.com/pc/products/2910411 Multi-channel electronic circuit breaker with IO-Link interface for protecting four loads at 24 V DC in the event of overload and short circuit. With electronic locking of the set nominal currents. For installation on DIN rails. CBM E4 24DC/0.5-10A NO-R - Electronic circuit breaker 2905743 https://www.phoenixcontact.com/pc/products/2905743 Multi-channel, electronic circuit breaker with active current limitation for protecting four loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails. Jan 8, 2024, 9:50 AM Page 19 (20) UNO2-PS/1AC/24DC/120W - Power supply unit 1110466 https://www.phoenixcontact.com/pc/products/1110466 CBM E8 24DC/0.5-10A NO-R - Electronic circuit breaker 2905744 https://www.phoenixcontact.com/pc/products/2905744 Multi-channel, electronic circuit breaker with active current limitation for protecting eight loads at 24 V DC in the event of overload and short circuit. With nominal current assistant and electronic locking of the set nominal currents. For installation on DIN rails. Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstraße 8 D-32825 Blomberg +49 (0) 5235-3 00 info@phoenixcontact.com Jan 8, 2024, 9:50 AM Page 20 (20)