1115657

CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Four-channel electronic circuit breaker module for protecting 12 and 24 V DC loads against overload and short circuit. Nominal current adjustable from 1 A to 4 A via LED button. For DIN rail installation via the CAPAROC current rails. Your advantages • The benchmark that you can tailor with the individual combination of multi-channel protective modules • Easy operation for everyone through tool-free assembly, uninterrupted installation, and transparent operating state • Exceptionally easy design-in with four separately fused channels with the narrowest of space requirements of just 3 mm per channel Commercial data Item number 1115657 Packing unit 1 pc Minimum order quantity 1 pc Sales key CL11 Product key CLA234 GTIN 4063151040185 Weight per piece (including packing) 94.9 g Weight per piece (excluding packing) 94.9 g Customs tariff number 85363010 Country of origin DE Jan 8, 2024, 9:50 AM Page 1 (8) CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 Technical data Notes General Note LABS release – in accordance with test specification VW PV 3. 10.7:2005-0 When using CAPAROC E1... modules, for continuous shock in accordance with IEC 60068-2-27 the 6 ms / 15g degree of severity applies Product properties Product type Device circuit breakers Product family CAPAROC Number of positions 1 No. of channels 4 Number of slots 2 Insulation characteristics Protection class III Pollution degree 2 Electrical properties No. of channels 4 General Operating voltage 10 V DC ... 30 V DC Rated voltage 12 V DC 24 V DC Rated current IN 4 A DC (per channel) Rated current IN 1 / 2 / 3 / 4 A DC (adjustable per output channel) Rated current (pre-adjusted) 4A Rated surge voltage 0.5 kV Tripping method E (electronic) Feedback resistance max. 35 V DC Switch-on delay 50 ms (each channel preset by default) can be adapted with CAPAROC PM IOL and CAPAROC PM PN power modules Required backup fuse Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element. Short-circuit switching capacity 300 A Dielectric strength 35 V DC (Load circuit) Fuse electronic Efficiency > 99 % Closed circuit current I0 typ. 20 mA (no load at 24 V) Power dissipation typ. 0.48 W (no load at 24 V) Jan 8, 2024, 9:50 AM Page 2 (8) CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 < 2.2 W (in nominal operation at 24 V and 4 A) Waiting time after switch off of a channel 5 s (at overload / short circuit) Measuring tolerance I ± 10 % (typ.) Temperature derating 12 A (Total current at 65 °C) 16 A (Total current at 55°C) MTBF (IEC 61709, SN 29500) 12874678.91 h (at 25 °C with 21 % load) 4942154.06 h (at 40°C with 34.25% load) 620311.92 h (at 55°C with 100% load) Voltage drop 0.1 V (at 4 A) Fail-safe element 5 A DC (per output channel) Load circuit Shutdown time 4 s (with overload 1.1…1.5 x IN) 1 s (with overload 1.5…2.0 x IN) 0.1 s (with overload 2.0…3.0 x IN) ≤ 10 ms (For short circuit > 3.0 x IN) Undervoltage switch-off ≤ 8.5 V DC (active) ≥ 9.2 V DC (inactive) Overvoltage switch-off ≥ 32.5 V DC (active) ≤ 30.5 V DC (inactive) Max. capacitive load ≤ 20000 µF (Depending on the current setting and the shortcircuit current available) Connection data Fuse-protected output Connection method Push-in connection Stripping length 10 mm Conductor cross section flexible 0.2 mm² ... 4 mm² Conductor cross section rigid 0.2 mm² ... 4 mm² Conductor cross section AWG 24 ... 12 Conductor cross section, flexible, with ferrule, with plastic sleeve 0.25 mm² ... 4 mm² Conductor cross section flexible, with ferrule without plastic sleeve 0.25 mm² ... 4 mm² Signaling Channel LED off off (Channel switched off) Channel LED yellow lit (Channel switched on, channel load > 80% ) flashing (Programming mode active) two flashes (Check the installation, no communication to power module) Channel LED green lit (Channel switched on) Channel LED red lit (Channel switched off, over- or undervoltage active) ON temporarily (Channel switched off, 5 s cool-down phase, overload or short-circuit release) flashing (Channel switched off, ready to be switched back on, overload or short-circuit release) Jan 8, 2024, 9:50 AM Page 3 (8) CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 two flashes (Channel switched off, system total current limit exceeded) Channel LED red-yellow flashing (Channel switched on, overload mode, capacity approximately 110 ... 150%, shutdown after 5 s) Channel LED red-green flashing (Channel switched off, programming mode active, current adjustment after overload or short-circuit release) Dimensions Dimensional drawing Width 12.4 mm Height 132.4 mm Depth 111.3 mm (incl. DIN rail 7.5 mm) Material specifications Material PA 6 PA 6 PA 6 PC Flammability rating according to UL 94 V-0 Environmental and real-life conditions Ambient conditions Degree of protection IP20 Ambient temperature (operation) -30 °C ... 65 °C (The temperature range of the power module must be taken into consideration) Ambient temperature (storage/transport) -40 °C ... 70 °C Altitude ≤ 4000 m (amsl) Humidity test 96 h, 95 % RH, 40 °C Shock (operation) 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) 25g (6 ms duration, half-sine shock pulse in accordance with  IEC 60068-2-27, continuous shock) Vibration (operation) 5g (10 ... 150 Hz / 10 cycles / axis / X, Y, Z) Approvals UL approval Identification UL/C-UL Listed UL 508 UL Recognized UL 2367 NEC Class 2 according to UL 1310 Standards and regulations Standards/specifications EN 61000-6-2 Note EMC – Immunity for industrial areas Standards/specifications EN 61000-6-3 Note EMC – Emission for residential, business and commercial properties and small operations Jan 8, 2024, 9:50 AM Page 4 (8) CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 Standards/specifications EN 60068-2-78 Note Environmental influences – Moisture and heat, constant Standards/specifications EN 50178 Note Equipping power installations with electronic equipment Standards/specifications EN 60068-2-6 Note Environmental influences – Vibrations (sinusoidal) Standards/specifications EN 60068-2-27 Note Environmental influences – Shocks Mounting Mounting type pluggable onto CAPAROC CR… current rail Jan 8, 2024, 9:50 AM Page 5 (8) CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/1115657  UL Recognized Approval ID: FILE E 317172  UL Listed  cUL Listed Approval ID: FILE E 123528 Approval ID: FILE E 123528 cULus Listed Jan 8, 2024, 9:50 AM Page 6 (8) CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 Classifications ECLASS ECLASS-11.0 27140401 ECLASS-12.0 27140401 ECLASS-13.0 27140401 ETIM ETIM 9.0 EC003538 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 9:50 AM Page 7 (8) CAPAROC E4 12-24DC/1-4A - Electronic circuit breaker 1115657 https://www.phoenixcontact.com/us/products/1115657 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 9:50 AM Page 8 (8)