1118663

SACC-DSI-FS-4CON-PG9/2,0 SCO - Device connector, rear mounting 1118663 https://www.phoenixcontact.com/pc/products/1118663 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Device connector, rear mounting, 4-position, Socket, straight, M12-SPEEDCON, coding: A, on free cable end, Rear mounting, Individual wires, Alternative product in accordance with RoHS II without Exemption 6c (Pb  50 V AC, conductive connector housings must be grounded • Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards. • Observe the corresponding technical data. You will find information: o On the product o On the packing label o In the supplied documentation o Online at phoenixcontact.com/products under the product • Only use tools recommended by Phoenix Contact • Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products • Ensure that the protective or functional ground has been properly connected. • VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or Jan 8, 2024, 9:50 AM Page 2 (7) SACC-DSI-FS-4CON-PG9/2,0 SCO - Device connector, rear mounting 1118663 https://www.phoenixcontact.com/pc/products/1118663 connector • The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12). Mounting Mounting type Rear mounting Connection method Individual wires Product properties Product type Circular connectors (device side) Number of positions 4 Coding A Thread type M12 Insulation characteristics Overvoltage category II Degree of pollution 3 Electrical properties Rated surge voltage 2.5 kV AC Nominal voltage UN 250 V Nominal current IN 4A Connection data Conductor connection Connection method Individual wires Contact connection type Socket Conductor cross section 0.34 Tightening torque 2 Nm 3 Nm Connector Connection 1 Head design Socket Head cable outlet straight Head thread type M12 Head locking type SPEEDCON Coding A Connection 2 Head design free cable end Jan 8, 2024, 9:50 AM Page 3 (7) SACC-DSI-FS-4CON-PG9/2,0 SCO - Device connector, rear mounting 1118663 https://www.phoenixcontact.com/pc/products/1118663 Cable/line Cable length 2 Cable cross section 0.34 Environmental and real-life conditions Ambient conditions Degree of protection IP67 Ambient temperature (operation) -25 ... -85 Standards and regulations Standards/specifications according to IEC 61076-2-101 Jan 8, 2024, 9:50 AM Page 4 (7) SACC-DSI-FS-4CON-PG9/2,0 SCO - Device connector, rear mounting 1118663 https://www.phoenixcontact.com/pc/products/1118663 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/pc/products/1118663   UL Recognized Approval ID: E118976-20100522 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A - 22 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 250 V 4A 22 - 20 - cULus Recognized Approval ID: E221474-20140616 Jan 8, 2024, 9:50 AM Page 5 (7) SACC-DSI-FS-4CON-PG9/2,0 SCO - Device connector, rear mounting 1118663 https://www.phoenixcontact.com/pc/products/1118663 Classifications ECLASS ECLASS-11.0 27440102 ECLASS-12.0 27440116 ECLASS-13.0 27440116 ETIM ETIM 9.0 EC002635 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 9:50 AM Page 6 (7) SACC-DSI-FS-4CON-PG9/2,0 SCO - Device connector, rear mounting 1118663 https://www.phoenixcontact.com/pc/products/1118663 Environmental product compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For information on hazardous substances, refer to the manufacturer’s declaration available under “Downloads” Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstraße 8 D-32825 Blomberg +49 (0) 5235-3 00 info@phoenixcontact.com Jan 8, 2024, 9:50 AM Page 7 (7)