1208241

CF 1000-1,5... Wire Stripping and Crimping Device CLIPLINE Data Sheet © PHOENIX CONTACT - 04/2006 Description The CF 1000 can be used to: – fully automatically strip wires or to – fully automatically strip wires and crimp ferrules to the wires. Flexible wires of classes 2, 5 and 6 in accordance with DIN VDE 0295 and ferrules as material in bulk in accordance with DIN 46228-4 are processed. The automatic stripping and crimping device is electropneumatically controlled by a microprocessor. The CF 1000 is available in 120 V or 230 V design. Thanks to short cycle times and the easy replacement of dies with different cross sections, the CF 1000 is also suitable for use in workshops as well as in complex cable assembly systems. Make sure you always use the latest documentation. It can be downloaded at www.download.phoenixcontact.com. A conversion table is available on the Internet at www.download.phoenixcontact.com/general/7000_en_00.pdf. This data sheet is valid for all products listed on the following page: 102911_00_en PHOENIX CONTACT GmbH & Co. KG • 32823 Blomberg • Germany Phone: +49-(0) 5235-3-00 • Fax: +49-(0) 5235-3-4 12 00 • www.phoenixcontact.com www.phoenixcontact.com/salesnetwork 1 CF 1000-1,5... Ordering Data Automatic Stripping and Crimping Device Description Type Order No. Pcs./Pkt Automatic stripping and crimping device 230 V design for insulated ferrules in acc. with DIN 46228-4, for cross sections from 0.5 mm2 ... 1.5 mm2 CF 1000-1,5 230V 1208199 1 Automatic stripping and crimping device 120 V design for insulated ferrules in acc. with DIN 46228-4, for cross sections from 0.5 mm2 ... 1.5 mm2 CF 1000-1,5 120V 1208209 1 Type Order No. Pcs./Pkt 1 Tool Kits Description Tool kit for insulated ferrules in acc. with DIN 46228-4, for cross sections: 0.25 mm² ... 0.34 mm², stripping length 6 mm CF 1000-TOOLKIT 0,34/ 6 1208212 0.25 mm² ... 0.34 mm², stripping length 8 mm CF 1000-TOOLKIT 0,34/ 8 1208225 1 0.5 mm² ... 2.5 mm², stripping length 8 mm CF 1000-TOOLKIT 2,5/ 8 1208241 1 4 mm², stripping length 10 mm CF 1000-TOOLKIT 4,0/10 1208270 1 Technical Data General Data Mains connection CF 1000-1,5 230V 230 V/50 Hz CF 1000-1,5 120V 120 V/60 Hz Power rating Compressed air port 0.5 A 4 bar, min. up to 6 bar, max. 1/4"-plug nipple internal thread (European standard) Compressed air consumption 1.2 l/stroke Cycle time 1.5 s Operating range 0.5 mm ... 2.5 mm Ferrules Material in bulk in acc. with DIN 46228-4 Pressing unit Trapezoidal Conductors Classes 2, 5 and 6 as per DIN VDE 0295 Controller Electrical / pneumatic with microprocessor Counter Mech. display, 5-digit, resetable Dimensions (W x H x D) 240 mm x 390 mm x 490 mm Weight 29 kg © PHOENIX CONTACT 04/2006 102911_00_en PHOENIX CONTACT 2